Electrical Controllers and Electrical Rooms

HookedonPonics · Mar 22, 2013

Im sitting here wondering if I misread this but 300kw. Geez. I wonder how long weve got before we are hearing about millon watt shows. This thread is amazing. Props olyver truelly exceptional looking work.

Olyver · Mar 23, 2013

A few more pix, wish I had my own thread to post the 100s of pics I have lol, from controllers to complete growroom builds.

el boyo · Mar 24, 2013

killer.. i likes.. please show mores.... :)

babyhughie586 · Mar 26, 2013

holy mother of god... i have to go change my pants after looking at those setups.. mad respect

DO IT · Mar 26, 2013

wow oly is da man when it comes 2 light controls... some pic's of off the shelf stuff... 20 ballast 40 lamp flip with 8k veg room... oly we need 2 talk about my next build.

squarepusher · Mar 27, 2013

I got mine from DX Hydro, pretty legit 12k board

DO IT · Mar 27, 2013

lets see some pic's

squarepusher · Mar 27, 2013

DO IT said:
lets see some pic's

here is my controller model, this is copied from dx website but same one (except 1 timer)

DO IT · Mar 27, 2013

DO IT · Mar 27, 2013

looks like it only has 4 outlets for 220v plugs.

washburn4life · Mar 27, 2013

Hey OLY! As a industral electrician in Washington I say great work! why use the 8+ gang, boxes dont they cost an arm and a leg compared to 4sq. boxes

I was wondering if you had any one line diagrams of some of the fancy stuff like PLCs

I would like to start doing in my rooms as they are starting to get bigger. Building my biggest yet at 18kw room with 28kw for the whole house.

Olyver · Mar 28, 2013

I have a lot of info and pics of PLCs, I will post most pics soon. DO IT, why are there no BX fittings to secure the powerboxes and home runs to your loadcenter, you should have some BX fittings and bushings to mount those cables to the loadcenter.

DO IT · Mar 28, 2013

All the units are tap conned to the wall and the ballast also.

Olyver · Mar 28, 2013

No dis bro, sweet setup, I was just referring to where the 6awg cable enters the loadcenter, spend $10 and get some bx fittings, I luv the tiled floor, that rocks.

DO IT · Mar 29, 2013

I went the 3cent ziptie method :pompus:... im sure you gping to hook me up with all that fancy smanshy stuff on the next build ... the tile floor make cleanup real easy ;)

capegrower · Apr 6, 2013

bobbybrown said:
So did this power a total of 96 1000w lights? I have a question for you.

How many lights could be run with 2 200 amp 3 phase panels? We need atleast 1 veg room, or the ability to veg in the actual rooms.

I could never understand how 3 phase worked, so I couldn't maximize my place. I was only able to design a place that runs 45 lights. 36 flowering lights and 9 veg lights in 5 rooms....with your crazy lighting load centers, what can you for me?

If you can design something for me that will run more lights, I will buy it and have an electrician install it...I am currently running 3 Powerbox DPC15000's with 2 LSM-20's.

Bobby... you mention 3 phase but you didnt mention the voltage at the panel. Every 3 phase system Ive seen is for large pumps and motors and is 440V and this needs to be transformed down to 120v/240v and this a subpanel and separate from the main 440 panel. So you can only take advantage of the 120/240 for lighting, however you might find a large chiller than runs 3phase 440V and remove that from the 120/240 load.

woodsmaneh · Apr 9, 2013

Boy would love to see the hydro bill for those big panels, well if your only running a few lights this is what I make up for my stuff and customers. I run 50a with these.

Fresh Starts · Oct 17, 2014

Here's a question for @Olyver : how do you build a staggered light activation feature into those builds? I'm concerned about activating 20+ lights all at once and pulling down that much power seems to cause problems. I'll post pics of my controllers tonight.

Olyver · Oct 17, 2014

I use a PLC and set delay times with each block, can stagger any number of lights at a time, sensors also trigger lights to stagger off if room gets a little too warm, some lights will shut off, then turn back on when on when temp lowers, then next set of different lights turn off if heat rises.

Fresh Starts · Oct 17, 2014

Please define PLC and reference any pictures @Olyver

Electrical Controllers and Electrical Rooms

Electrical Controllers and Electrical Rooms

HookedonPonics

Olyver

Attachments

el boyo

babyhughie586

DO IT

Attachments

squarepusher

DO IT

squarepusher

DO IT

DO IT

washburn4life

Olyver

DO IT

Olyver

DO IT

capegrower

woodsmaneh

Fresh Starts

Olyver

Fresh Starts

Electrical Controllers and Electrical Rooms

Electrical Controllers and Electrical Rooms

HookedonPonics

Olyver

Attachments

el boyo

babyhughie586

DO IT

Attachments

squarepusher

DO IT

squarepusher

DO IT

DO IT

washburn4life

Olyver

DO IT

Olyver

DO IT

capegrower

woodsmaneh

Fresh Starts

Olyver

Fresh Starts

Privacy & Transparency

Privacy & Transparency