Moe.Red
- 5,044
- 313
???So the conjoining tube say 3 inch return line, that can reflect light from res and from inside tent back into the root area, do u suggest white or black, since half is inside and half is outside.
I was under the impression whatever logic is applied to an external res should be applied to an internal one. I mean with our without roots in them I guess matters. I guess ill concede and say my logic wouldnt apply to the external res IF the light wasnt reflected into the root res. I use single tote more than external res, i should have read more. I just was getting the impression it doesnt matter in either I guess and im sure others were too.
Im dying bro, why you say its a fight instead of data exchange. I dont think anyone here who has being doing hydro for years is doing it wrong. Im saying that there are multiple of us doing it correctly in different ways.???
View attachment 1297302
There is no PVC in the plant sites. Just between them. Light would need to take a 90* turn to get into the plant sites, if there even was any. Certainly not coming from the res...
I feel like we are on completely different points here, so I'll just say you do whatever works best for you. I really don't have a dog in this fight, I'm just trying to help folks out if I can. All I can say is my results speak for themselves. I don't need to fight about it.
This is what my roots look like in this system at harvest time
View attachment 1297304
Somebody better tell those roots they are doing it wrong.
This is where I had to jump in and say, if you flashlight test it, you will see it leaks light. White pvc can be painted black. Then no light gets in, regardless if its an issue or not, no one will be hurt if they use black pvc vs white. I would suggest that if the do they opposite, and run white that will increase their chances of light entering their res. SURE we can say if they have an elbow it it wont matter, or that even if gets in it doesnt matter. Yet none of that takes away from the fact that generally, we try to limit light from entering the res the roots sit in.I'm also constantly hearing that light getting thru the 3" PVC returns is a big issue too. It's just not.
There are a lot of misunderstandings out there.
Because we are talking past each other. I don't see a data exchange, I see that you are convinced that white PVC is a problem, and I'm telling you it is not. I'm trying to show proof. No proof will be acceptable to you, so we are at an impasse.Im dying bro, why you say its a fight instead of data exchange.
I break all the rules. Room is 3x13, 2 chillers 2 air pumps 5 ballasts, ive seen 100+ deg in that area. My plants seem to thrive pumping warm air into 68 deg water using a single small rd air stone in each plant. And i throttle down the air.Would you know if you are running a chiller?
Before I added my chillers, I was running the piston pumps. I still have them collecting dust. They get as hot as a pistol when you run them 24x7. Like too hot to touch. You would have a hard time convincing me that removing those from the system was not a temp benefit. But no, I have not done a bench test to determine how much heat energy is transferred to the res. I'm convinced they do, but I could be wrong, I just don't see it.
The diaphragm pumps create almost no heat, they do not even have cooling fins or any need for them.
Are we talking about the same thing?
Not sure we are talking about the same thing. This is the kind of pump I was referring to.I break all the rules. Room is 3x13, 2 chillers 2 air pumps 5 ballasts, ive seen 100+ deg in that area. My plants seem to thrive pumping warm air into 68 deg water using a single small rd air stone in each plant. And i throttle down the air.
View attachment 1297323
Wrong sir, what you meant to say, is if everyone does it exactly like you do, then its not a problem. You keep flashing pictures of roots like it means something? We all got white roots, why the photo op?Because we are talking past each other. I don't see a data exchange, I see that you are convinced that white PVC is a problem, and I'm telling you it is not. I'm trying to show proof. No proof will be acceptable to you, so we are at an impasse.
On the other side, there is no way for you to convince me that painting my PVC black will improve those roots I posted. I believe it is a waste of time and energy. It also makes it a PITA to make changes to the system and get things glued without leaks.
That's all I got man, you do you. Peace.
Here is some more root porn for ya:
View attachment 1297318
Those are 4 weeks old, currently still growing. I think they look pretty good.
Cash, we are now 100% done. Find someone else to fight with. It ain't me. You wear me out.Wrong sir, what you meant to say, is if everyone does it exactly like you do, then its not a problem. You keep flashing pictures of roots like it means something? We all got white roots, why the photo op?
For simple designs, ones that ONLY have a pump in the res, and possibly an airstone, for 99% of systems out there, they will not be able to maintain the DO levels you do, or even the colonies you do. Your shit looks like its a step away from you adding uranium to generate electricity.
So if your going to say that in your experience thats cool, but you will not be able to say that no one should worry about it just because you have never scrubbed gunk out of your lines. Idk why you have to be so difficult when discussing anything you dont do.
Your the one acting like were married here. I just came to offer up ways for the op avoid issues in the future with algae problems. As long as he can read all this im sure he will do whatever he wants as we all do. Id say it was better for him to hear the criticism to eachothers claims. So far all he needs is an elbow to make it not a big deal. . gotchaCash, we are now 100% done. Find someone else to fight with. It ain't me. You wear me out.
Not sure we are talking about the same thing. This is the kind of pump I was referring to.
View attachment 1297326
Are the white and orange things the pumps you are using?
Tap roots with fibrous roots with those fishbone type hairs and your water level is 1 inch below pot. Looks typical and what i always i wanted.???
View attachment 1297302
There is no PVC in the plant sites. Just between them. Light would need to take a 90* turn to get into the plant sites, if there even was any. Certainly not coming from the res...
I feel like we are on completely different points here, so I'll just say you do whatever works best for you. I really don't have a dog in this fight, I'm just trying to help folks out if I can. All I can say is my results speak for themselves. I don't need to fight about it.
This is what my roots look like in this system at harvest time
View attachment 1297304
Somebody better tell those roots they are doing it wrong.
Wrong sir, what you meant to say, is if everyone does it exactly like you do, then its not a problem. You keep flashing pictures of roots like it means something? We all got white roots, why the photo op?
For simple designs, ones that ONLY have a pump in the res, and possibly an airstone, for 99% of systems out there, they will not be able to maintain the DO levels you do, or even the colonies you do. Your shit looks like its a step away from you adding uranium to generate electricity.
So if your going to say that in your experience thats cool, but you will not be able to say that no one should worry about it just because you have never scrubbed gunk out of your lines. Idk why you have to be so difficult when discussing anything you dont
Cashmeh has a lot of unconventional ideas for growing Cannabis. I would suggest to anyone, do not take any advise from this person. His always have no science behind them and are general just his opinion???
View attachment 1297302
There is no PVC in the plant sites. Just between them. Light would need to take a 90* turn to get into the plant sites, if there even was any. Certainly not coming from the res...
I feel like we are on completely different points here, so I'll just say you do whatever works best for you. I really don't have a dog in this fight, I'm just trying to help folks out if I can. All I can say is my results speak for themselves. I don't need to fight about it.
This is what my roots look like in this system at harvest time
View attachment 1297304
Somebody better tell those roots they are doing it wrong.
Is that all you got @CashmehCashmeh has a lot of unconventional ideas for growing Cannabis. I would suggest to anyone, do not take any advise from this person. His always have no science behind them and are general just his opinion
How about showing everyone you toilet coupling idea instead of buying bulkhead fittings again.Is that all you got @Cashmeh
Love you too bro even though your my biggest fan. Like you are so random for that.Cashmeh has a lot of unconventional ideas for growing Cannabis. I would suggest to anyone, do not take any advise from this person. His always have no science behind them and are general just his opinion
I was searching the forums for one of your hydro grows or diaries to poke fun of, cant find any. You bold enough to pont me in the right direction?Is that all you got @Cashmeh
See that is one of the many ways we are different. I do not need to post my grows and brag because I have enough confidence in my abilities that I do not see a reason to post up huge colas and brag. Also I have to grow challenging strains because the market I am in demands exotics.Love you too bro even though your my biggest fan. Like you are so random for that.
I was searching the forums for one of your hydro grows or diaries to poke fun of, cant find any. You bold enough to pont me in the right direction?
Lol ill tag you in the thread when its done pops. And no leaks lol, shit was on carpet for 2 months then a tent for another 2, no leaks either.How about showing everyone you toilet coupling idea instead of buying bulkhead fittings again.
That sure worked out well. How many times did you have to repair the leaks?
Just trying to show the op the difference in our systems and results. Im confident not cocky. . your just mad and ranting. Are you the daddy of someone I pissed off. Like prolly an alt account or your grows are trash. Either way. . no need to jump in and attack anyone. Im just playing defense today.See that is one of the many ways we are different. I do not need to post my grows and brag because I have enough confidence in my abilities that I do not see a reason to post up huge colas and brag. Also I have to grow challenging strains because the market I am in demands exotics.
I wish I had it as easy as you with your green crack and blue dream
No no I remember you posted all the problems you had when you first sat it up. You remember the toilet to plumbing adaptors you used to save a few bucks that costed you days to get to quit leakingLol ill tag you in the thread when its done pops. And no leaks lol, shit was on carpet for 2 months then a tent for another 2, no leaks either.
Now lets see that hydro system of yours.
We have hashed this out already. I told you it was more difficult than expected yet I would have to do it all over again the exact same way. Within a week or so of doing that I was able to replace my drain in the shower. I went from 0 plumbing experience before that. Do I plan on building another system that way, no lol. . so again, your suggesting that because I tried to build my own bulkheads, no one should listen to me? Like i really dont want to reply yo your answer to that.No no I remember you posted all the problems you had when you first sat it up. You remember the toilet to plumbing adaptors you used to save a few bucks that costed you days to get to quit leaking
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?