flowamasta
- 647
- 143
Lovely simply lovely.
Aren't they! :) I'm as shocked as the next person! maybe my biggest colas yet!! I'd be only guessing at what she will yield for a cola like that, but it's gotta be over an ounce for sure, i can't squeeze these colas if i tried, and they are only just oassed the half way mark. Scary stuff if you ask me :)Huge cola's you have going on, sweet !!
I'm also a non-believer :o Her colas are something i've never seen also, this growing in my mates setup was completely different in structure and resin... could be climate related perhaps, it could be that she liked the mix of Dutch Masters Grow formula coupled with the Cycoflower's Bloom cycle!? We are REALLY looking forward to smoking her and i'm constantly thinking of ways to enhance her final flush., even though i'm not there yet... I've actually never been so nervous as to what to do next, to have such a beautiful work of art growing so much everyday, the plant is nearly toppling over to one side, and i'm having alot of trouble keeping her upright! she's basically balancing on each colas point. If she had no support these buds would be on the floor by now easily!!!! Dense is an understatement, and i can't believe my mate uses PGR's to stunt this sexy girls legs!!!! I can't wait to show him..... or should i !?? This is a profound improvement from what his setup has produced. Glad i got a baby girl of her!!I cant believe the production at such a young age man, she is quick!. I bet your glad you saved these genetics from certain disaster! Im a bit jealous over here in the states man... Wish I could pick up some genetics that resemble that beauty! -S0uP
I cant believe the production at such a young age man, she is quick!. I bet your glad you saved these genetics from certain disaster! Im a bit jealous over here in the states man... Wish I could pick up some genetics that resemble that beauty! -S0uP
Holy crap chipper!!! what can i say? You just can't beat perlite what you want the roots to go mental lol!! ok, maybe a small modification :eek:o_O !!!!!!!! I'm stumped! well almost, i did think this was possible and i have seen a few people place a criss-cross section of perspex as a spacer between the two pots which is supposedly meant to trap the roots from entering the return area. I 'myself' have not quite run into THAT much of a root explosion LOL!!! awesome, and glad you found the culprit, i don't know how to deal with an issue like that without being there ofcourse, but good luck with that! i wish you the best in finding a way to combat the problem! Did your pot sok go all the way to the bottom? and i forget if they are 50 litre pots...? definitely increase the return hose size if not the reducer being a right angle, would not be as efficient as just running it straight out the back of the tent and around to wherever the res is.... this right angle piece is standing out in my opinion being the issue ;) I always have roots traveling down the hose, but never have they actually blocked it.Hello again mate, I just walked into yet another flood :banghead:. Close to 40 litres I reckon. The plant that flooded is the one at the rear of my room. This is the problem
View attachment 300719
View attachment 300720
A lovely healthy root system, that will proberly be back in there sometime soon. At least their happy plants:)
Cheers Chipper Pig
LOL nice one!any one of them girls i would gladly go to bed with . further more i'll take them all !
I do have a small tower oscilating fan in there just circulating the air, and a tiny 750 watt thermostat heater which doesn't let the room drop below 21-23 degrees. ;)you dont dry them with the fans and stuff on?
Thanx mate! i have 4 large 80mm holes cut in the bottom of the inside pot to allow the pot sok to drain into the return bucket and out the line. The sok holds fine and i rarely get bits coming through, the holes aren't enough so that the weight pulls them through or breaks them.What's up flowamasta? Sick pics! Gotta quick question... On your hydro setup are you cutting a hole into the bottom of the second bucket holding the pot sock?!
Chipper, Just gonna chime in here... You NEED to change that 90 out for a straight shot. Im a professional plumber (Day job :) ) so I can say with confidence that is where your bottleneck is putting too much pressure on that barb joint. As an alternative you can grab a small compression band from an auto parts store (Used for misc. hoses under the hood) and clamp down to roughly 50psi (Just hand tight) at every fitting for added piece of mind! :)
Flowa, Looking amazing SUPER dense I can only hope the strain Im pushing right now resembles that structure. As far as your final flush goes, I PERSONALLY like to flush with out of range PH water (8.0 or so) for like 7-10 days.Maybe some dextrose if I feel the need... The out of range PH makes the plant unable to use any NPK or micros in the medium and instead turns to what it has stored up over its life cycle to sustain itself, which should leave less of it for me to taste when its dried. Also, I like to let the plant hang for a longer period of time at about 55%H and do a dry trim, I believe this assists with the metabolic break down of chlorophyll in the plant and also assists with a superior finished product. Just my thoughts, let me know what you think when you can! -S0uP
Thakyou kindly :) That was my last indoor i believe and i harvested around 1 and 1/4 lb dried, not my biggest i'm not sure what happened really, not that i should complain, but was going for a bit more than that as i had a bit of a headstart putting my own large clone in that which was ready to boom! I usually veg for no more than 28-30 days, and try to fit everything in under 3 months so starting early is a huge bonus for me. Bigger plant :)
Thanx for being here, and welcome to my newest thread!
I have seen your name around ;)
Thankyou also!! Trying to be a bit more artistic these days ;) Its nice to know i'm capable of doing something i only wished about as a youngen..
Yeah the twist is a strange thing, my tiny clone is just starting to do it and just got roots about a week ago!? I waaaas thinking it might of had something to do with the reflective material in the tent causing the leaves to curl in some hot spots perhaps.... not that i can really see any with my cam, even after playing with saturation and all sorts, it looks marginally even to me and the hood is of a decent brand but the tent material is definitely different than the EZY tents. it has a much more glossy glass like surface..... strange.
I also moved the plant about 90* clockwise so the 2 main heads are directly in line with the bulb. Also because the flowering is happening at such a rapid rate her stretching has nearly stopped! have i been lost for a week or something, cause i'm seeing buuuuuds.
I can't wait for the outdoor Jack, her smell has just gone from nice to insanely overwhelming overnight. and even the bottom buds are all hanging looooooooow
Glad you & your daughter like the mousey!! I will be sure to include more wildlife :p I actually wasn't 100% sure it was a mouse!!? i googled it and all, but yep looks like a little mouse!! i got so close to this little guy that a few images were shadowed by my lens as the flash resides on 1 side of the camera. He was as curious as me, and eating our chickens grain!!! what to do!? us hippies don't like to kill any living things, i even hung the feeder!!!! little shitters. I even seen 1 run across to my outdoor plant when i drenched him watering the garden!!
Day 11 Flowering :) It is very hot weather, and i'm struggling to keep temps at optimum!! Will i get to run my 2nd 600 i have setup in the corner!!! I need the temp to get down to 26 in the tent before i can!!
View attachment 293787View attachment 293788View attachment 293789View attachment 293790View attachment 293791
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?