SnappyJack
- 253
- 93
Free Microscope Holder / Hold Scope Rock Solid For Best Image / 3d Print Free Use SLT File
Wanted to give something back to my fellow farmers... especially those guys who go out of their way to help us fellow growers. This is for those who have the microscope with the body diameter or 1.25 inches or about 32 mm
Holding the microscope steady enough for an excellent image is nearly impossible.. there are some ways to do this though not always practical.
How this can work for you is to download the file...either print it yourself or use a 3d printing service.
Borrow a 1/4-20 tap.. line it up center... I mount/use it on a VS drill... if needed you may want to run an appropriate size drill... as printing / service (ID) diameters may vary.
From here you have an option to put a piece of all thread... cut a bolt.. or use whatever genius method you can design to mount it... example to a dowel... a stick... to a clamp... to a ladder..etc
Bluetooth Microscope
More to follow depending on response and need.
Use this link:
MS.stl by SnappyJack | STL
MS.stl by SnappyJack - Free download as STL file (.stl) or read online for free.
You may need to double click... seemed a little slow to respond in my initial trial...
The free file service is available for 30 days from this post... If needed will re-post
(Remember... you only get what you pay for)
Last edited:
