B
Buster1977
- 32
- 18
Thats exactly what im gonna do here in about an hour when lights come on...or should it be done just before they go off? I realy thank all of you for the help ive put alot of work into this grow and and its cool y'all help a poor sap in need✌✌From my understanding, that's a part of it. Pinch the stalk with increasing pressure until you've weakened it just enough to lay it over and tie it into place. I've never done it, but have seen it recommended to others who are running out of vertical space.
78-82 temp no way to test humitity but i think its on lower side when i open it up i dont feel it...i have a homemade flower room i framed out in corner of bedroom 4x4. But after vent problem i vented at top and have fan at bottom drawing in air from bedroom. Should i not be doing this? I just haven't been able to afford vent tube and fanIf your ballast is dimmable try running 750 or 600. You might be impressed. Throwing more watts at the problem isn’t always ideal. What temp and humid you got rocking over there?
Sounds like you are doing your best with what you got. Ideally if you humidity is low, you need to lower temp accordingly. 80 is too high unless you have like 50 at least. There are charts out there. I’ll look for a link to post78-82 temp no way to test humitity but i think its on lower side when i open it up i dont feel it...i have a homemade flower room i framed out in corner of bedroom 4x4. But after vent problem i vented at top and have fan at bottom drawing in air from bedroom. Should i not be doing this? I just haven't been able to afford vent tube and fan
Ok i appreciate that...i am going to tone my light down. And do you think it would be wise to pinch the tops in question?Sounds like you are doing your best with what you got. Ideally if you humidity is low, you need to lower temp accordingly. 80 is too high unless you have like 50 at least. There are charts out there. I’ll look for a link to post
Just bend em on over and if you break one a bit just tape er up. MintyOk i appreciate that...i am going to tone my light down. And do you think it would be wise to pinch the tops in question?
So i was able to tie 4 tops down without breaking and was able to raise light like 3 more inches. Gonna turn the light down too heres pics.the 4 tops i tied down were a good 6 inches taller than the restJust bend em on over and if you break one a bit just tape er up. Minty
Thank u sir!!.. I will update to let y'all know how it turns out..may all your grows be plentifulLooking good mang! Rock on
Will do✌Make sure and rock some fans moving air around to avoid powdery mildew and other bull roar. You got a packed space there. I love it
Thank you.. it was a stupid move...live n learnDefinitely look a lot better, leafs are not curled. I think your problem was sucking air from the bottom, that just takes air out the bottom of your tent, the hot air from your light is still in the upper two thirds of of your tent due to heat rising. Looks like you have it sorted.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?