GrowGod
BANNED!
- Posts
- 8,429
- Reactions
- 34,242
- Joined
- Nov 20, 2014
- Points
- 313
What’s your recommendation for per 1000 watt not air cooled to mini split ac size?
What’s your recommendation for per 1000 watt not air cooled to mini split ac size?It probably won't work very well. I only recommend 6000 watts air cooled with a 24k a/c. If you're venting air from room then yes it could affect the a/c and may have a temperature control issue.
6000 BTUs non air cooled.What’s your recommendation for per 1000 watt not air cooled to mini split ac size?
Wow per light?:opps:6000 BTUs non air cooled.
Sounds like a no brainer! But now the question is do I get two of them because I have two rooms or go 48k with two out vents. I didn’t realize before you can have multiple.Per 1000 watts non air cooled,1-1000,3-315s etc etc.
You will be chilling even if it's 110,I do.
The instructions were ok on the install, but lacked detail on the features and how they work individually and together. Like, I "guess" I should set it to heat in winter and it will cool back to target temp when the lights come on (they are sealed air cooled). Got more info from store and ordered that optional thermostat, hope that will put much of this to rest. Ill get back to this after Tues when I expect to install that.
Woody
Sorry also the ballast will b outside the roomHey John this thread is awesome, have a question on my setup. Room is 12x24 7 foot ceilings. I have 8 Ac hoods a 3ton Fujitsu 2 18k heads and a 10k window shaker in basement New England. My question is the lights are split 4 on each side of 12x12. I don’t want vent the air outside for security reasons. They r now in a y with a 8in can filter push thru each set of 4. But recirculating inside room. I know the 8inch fan is prob to smal for 4 1000hps. I do 4x4 scrog under each light so try get hoods 18-24 inches close. Do you think with 100 pint dehumidifier that the 3 ton plus 10k window will b sufficient?
Don't use Aura. Portables with ducts suck.Ok cool. Big investment. Is there issues you have seen with portable units that have ducts? Seems to be a cheaper route if it works.
Hey John this thread is awesome, have a question on my setup. Room is 12x24 7 foot ceilings. I have 8 Ac hoods a 3ton Fujitsu 2 18k heads and a 10k window shaker in basement New England. My question is the lights are split 4 on each side of 12x12. I don’t want vent the air outside for security reasons. They r now in a y with a 8in can filter push thru each set of 4. But recirculating inside room. I know the 8inch fan is prob to smal for 4 1000hps. I do 4x4 scrog under each light so try get hoods 18-24 inches close. Do you think with 100 pint dehumidifier that the 3 ton plus 10k window will b sufficient?
Cool n thanks for the quick reply.Should be plenty assuming they can run properly when it's cold outside.
Have a 8 inch duct I could pull in outside air on a thermostat. Just don’t like the noise it makes outside at night. Sounds like a small engine plane lolCool n thanks for the quick reply.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?