Log In Register

Growers Choice Commercial 315 Cmh

  • Thread starter Thread starter bankcee
  • Start date Start date
  • Tagged users Tagged users None

Growers Choice Commercial 315 Cmh

bankcee 69 Replies 26,101 Views
Page 4 of 4 · Replies 61–70 of 70
Thanks to all for your input! I am thinking that the neg review at GH for the Nano x Phillips combo is definitely HorseHocky from some schill, somewhere. Still, I think I will give Nano gear a pass until I have more time to read up and catch some more reviews from other farmers.

Peace and Good Green vibes to all!!

Derf
I would avoid nanolux and go with solistek or gc for cmh :)

Both solistek and gc have many saftey features built into there ballasts.

Smart Start Ignition Control
Soft Start Technology
Automatic Frequency Adjustment
Timed Re-Strike of Hot Lamp
Full Circuit Protection

Nanolux have no added saftey features...
 
Does the ballast on this 315 stay cool enough that you could touch it? Could you touch the glass? How much heat does this produce compared to an HPS?

Should you replace the bulb after each grow?
My prism 315 ballasts are running at about 105-110 right now,just temp gunned them.i have open reflectors and can almost touch the bulb and keep my hand their.Like demon says those bulbs Will last year's without much loss at all.
 
I cant help you there but if i had to take one over the other id go with the SS burning 2 philips 315s just because those bulbs are proven and you can mix spectrums,the 630 DE is newer and is not philips.Im going to try the GC DE in a gavita soon but it will be awhile before i know anything.
 
10000 hrs
NOT 100000

Just looked at the vanquish 315 cmh, looks like gavita setup.
 
I just ordered the revolution deva 1000w de and picked up the growers choice 630 de lamp with it. See how it does. I ran the gc de315 in between 4 Phillips bulbs and size for size it was there but the colors you get with the Phillips bulb are night and day. Same thing with the the single end.
 
Having issues with the what I'll call the chaining port. Anytime I hook up anything to that port the light shuts down and I get a flashing green light indicating remote off. Power cycling with 20 minute interval failed to alter results. Anyone had this issue? Looking to chain to PX1
 
Hi there, I have a question about the GC CMH fixture.

I bought GC 315 in 2020 and just ran one harvest with it. Today, I decided to start a new one but when it turned on a red light in my ballast was on. According to the manual, this might be HVP (High Voltage Protection), HTP (High-Temperature Protection) (this can't be bc as fast as turning on the light was already red), or On-DB (Ballast is switched on by dim button) which I don't even know what that means.

Do you think that after five years my lamp isn't ok? Thanks
 

Attachments

  • Screenshot 2025-02-03 200735.png
    Screenshot 2025-02-03 200735.png
    34.5 KB · Views: 8
Page 4 of 4 · Replies 61–70 of 70
Back
Top Bottom