Help Help!! Things have started to go bad

[nsw3913t]

So i am in week 4 of flowering and things have gotten bad! See attached pics. So soil PH is around 6.6, water PH is 7, been using well water ran through the houses softner and adding PH up, but now using purified water from store. Using tiger bloom, cyco sugar rush with every watering. Using blastin blooms 0, 50, 30 once a week and just started with some micro evey other week. Now almost all the plants have started to turn yellow and burnt at the edges! Temp in tent is around 82 w 48% rh during light and 73 and 48% during dark. I moved the lights up the other day incase they were too close. Please help, i dont want to guess i want to go a certain direction to fix this. Just dont know which way to go. Oh i also have 3 gal fabric pots and have had to water 650ml every day dut think that was too little water so 2 days ago i doubled it. For 1 feeding to rewet the soil. I have not done anything yet this morning. Hoping to get some good feed back from you guys!! Thanks for your help!!

 

[nsw3913t]

So i am in week 4 of flowering and things have gotten bad! See attached pics. So soil PH is around 6.6, water PH is 7, been using well water ran through the houses softner and adding PH up, but now using purified water from store. Using tiger bloom, cyco sugar rush with every watering. Using blastin blooms 0, 50, 30 once a week and just started with some micro evey other week. Now almost all the plants have started to turn yellow and burnt at the edges! Temp in tent is around 82 w 48% rh during light and 73 and 48% during dark. I moved the lights up the other day incase they were too close. Please help, i dont want to guess i want to go a certain direction to fix this. Just dont know which way to go. Oh i also have 3 gal fabric pots and have had to water 650ml every day dut think that was too little water so 2 days ago i doubled it. For 1 feeding to rewet the soil. I have not done anything yet this morning. Hoping to get some good feed back from you guys!! Thanks for your help!!

 

[Coatesygrow1]

Nuke burn

 

[nsw3913t]

Nuke burn

What does that mean?

 

[nsw3913t]

What does that mean?

And how do i fix it??

 

[Coatesygrow1]

Do you feed everyday in 3gallon pots?

 

[nsw3913t]

Do you feed everyday in 3gallon pots?

Yes just the tiger bloom and the sugar rush.

 

[nsw3913t]

Yes just the tiger bloom and the sugar rush.

Do you think i should do a flush or just use straight water for a bit?

 

[mysticepipedon]

There's some nute burn, but they're also light burned. The plant in the last pic is getting fried.

What's all that reddish brown liquid on the floor?

 

[nsw3913t]

There's some nute burn, but they're also light burned. The plant in the last pic is getting fried.

What's all that reddish brown liquid on the floor?

Its a little run off from the plants when i watered there was some soil there and it all got mixed up. Just didnt wipe it up yet. And ok ill turn the lights down and just use water for a few days also. Thanks for your help!

 

[Buzzzz]

So i am in week 4 of flowering and things have gotten bad! See attached pics. So soil PH is around 6.6, water PH is 7, been using well water ran through the houses softner and adding PH up, but now using purified water from store. Using tiger bloom, cyco sugar rush with every watering. Using blastin blooms 0, 50, 30 once a week and just started with some micro evey other week. Now almost all the plants have started to turn yellow and burnt at the edges! Temp in tent is around 82 w 48% rh during light and 73 and 48% during dark. I moved the lights up the other day incase they were too close. Please help, i dont want to guess i want to go a certain direction to fix this. Just dont know which way to go. Oh i also have 3 gal fabric pots and have had to water 650ml every day dut think that was too little water so 2 days ago i doubled it. For 1 feeding to rewet the soil. I have not done anything yet this morning. Hoping to get some good feed back from you guys!! Thanks for your help!!

Don't use softened water for your grow,your salt will build up over time

 

[Goodshit97]

Using the softened water causes salt build up for sure. Feeding tiger bloom at 2-8-4 every watering and adding a 0-50-30 booster is to much Phosphorus IMO. I feed tiger bloom as well and only feed half the recommended dose and at most i only feed every 3 days.

Also, raise or dim your lights for a while too until things recover.

 

[nsw3913t]

Don't use softened water for your grow,your salt will build up over time

Yeah thats y i switched to bottled. I have an ro unit coming tomorrow. I didnt even think about the softner till i had to fill it the other day, thats when i switched.

 

[nsw3913t]

Using the softened water causes salt build up for sure. Feeding tiger bloom at 2-8-4 every watering and adding a 0-50-30 booster is to much Phosphorus IMO. I feed tiger bloom as well and only feed half the recommended dose and at most i only feed every 3 days.

Also, raise or dim your lights for a while too until things recover.

Ok ill go w just water for a few days and my girl just dimmed the lights. Im at work so she put em to 50% i wont be able to get in there again till tomorrow morning so what should i set the lights to? I have photone so i can set em up when i can get into the tent again. Thanks

 

[Goodshit97]

Ok ill go w just water for a few days and my girl just dimmed the lights. Im at work so she put em to 50% i wont be able to get in there again till tomorrow morning so what should i set the lights to? I have photone so i can set em up when i can get into the tent again. Thanks

What light are you running and what size space?

 

[nsw3913t]

What light are you running and what size space?

I have 4 200 watt full spectrum leds and a 60x60x80 tent.

 

[Goodshit97]

I would run each light at about 65-70% power. That would put you somewhere around 560-600 watts if i mathed right, should help things recover a little easier.

 

[nsw3913t]

I would run each light at about 65-70% power. That would put you somewhere around 560-600 watts if i mathed right, should help things recover a little easier.

Great! Thanks for your help!!

 

[ArtfulCodger]

If you don't have one already, you might want to invest in a PPM/EC meter to measure the salt levels in both your inputs and run-off. Apera and Blue Labs make mid-priced ones that are widely respected, but even an inexpensive $30 Amazon pen will give you an idea of where you stand.

 

[nsw3913t]

So they look like they are a bit happier now. Getting taller lol. Flowers are looking nice. Gunna wait till monday to go back to nutrients. And half of what i was using. And gunna leave the lights where they are for now. Thanks again for all the help!! I was a mess!!