High Times at Redneck'x 🌿 Cabin

[Gmix]

Ha found your dairy

Can’t believe you gave your plants a shower

Good read bud

200 is on the upper limit as it’s the recommended max you might be better having it lower

Good luck bud

 

[Redneckx]

Ha found your dairy

Can’t believe you gave your plants a shower

Good read bud

200 is on the upper limit as it’s the recommended max you might be better having it lower

Good luck bud

Your welcome my friend

Haha y can bet!
Gave em the full Amazonas monsoon experience
In nature they also get some heavy rains, so why not ?
It was necessary, hate the neem smell, weather from the oil nor the cake, nothing for flower time.

Thank you, hope y enjoyed it. That be said, it's just getting better. Was still playing around but with the new light i gotta get a little more serious on yield on the next run

Good to know, liked the idea of having it on 50% but tbh i'm just waiting the next few days til the clones getting droopy and I have to back off and get closer.

 

[jadins_journey]

Thanks buddy!
It's a pretty rough light when it comes to intensity, learned to handle it the hard way

Do you think ~200 ppfd could be too much for just rootet or still unrootet clones? I had around same PPFD with my burple light.
Needed more heat inside the tent so I did it on 50% and hung it kinda high to get more reflections resulting in more heat, and ofc the driver went hotter.
I'm going to check them everyday now, since I seen the white gold

I start cut clones at 25ppfd and go up to 200 by 3 weeks or so. Lots of factors to consider but plants need roots before you try and induce photosynthesis at a growth rate

 

[Johnie]

First time growing with clones.
Original Oreoz - Growers Choice
Nuggz - Ethos Genetics
Serotica - Serious Seeds
Just repottet and little low stress training.
A little curious about growing photo sativa types...so much side stems and a 200-220% stretch.
With breaking the apical dominance I should archive to get a wider and not so tall plants right?
Is there a point when the dominance fell apart and shoots in the sky like there is no limit? Maybe during flip?View attachment 2330082

 

[Johnie]

Pulled in too trim turned nice darker one they call the NEW other was kush of some type left in dark baby barn for 10 just for fun kept feeding R/O water

 

[Johnie]

10 days of dark worked fed water every two days they kept drinking plants!!

 

[Redneckx]

Pulled in too trim turned nice darker one they call the NEW other was kush of some type left in dark baby barn for 10 just for fun kept feeding R/O water

Beautiful colour change, good job man!
Hope the trichomes didn't ripe too much during the ten days in darkness.
Did y checked them before and after? There should be a lot more amber & CBN in those buds right?

 

[Johnie]

Beautiful colour change, good job man!
Hope the trichomes didn't ripe too much during the ten days in darkness.
Did y checked them before and after? There should be a lot more amber & CBN in those buds right?

Reply they weren’t finished yet with I had to do something so I new a day or two is right so the rest did its job the purple red one was unreal I have a loop at the end cloudy with dots of Carmel honey perfect for my personal organic smoke .. I have tons on pic field pics greenhouse and singles in 4x4 with cool tubes I was cloudy few drops even one looks like honey to me that drop there’s only a few

 

[Johnie]

Amber is the word sorry just dots

 

[Redneckx]

Reply they weren’t finished yet with I had to do something so I new a day or two is right so the rest did its job the purple red one was unreal I have a loop at the end cloudy with dots of Carmel honey perfect for my personal organic smoke .. I have tons on pic field pics greenhouse and singles in 4x4 with cool tubes I was cloudy few drops even one looks like honey to me that drop there’s only a few

If y like a good night smoke then it's probably a good way to archive that.
I'd like to do it for more colour and nice deep flavours would be awesome too!
Upcoming outdoor season will be challenging.
Maybe I'm gonna try that to get more riped autos, probably have to pull them early before they get snatched.

 

[Redneckx]

Gotta watch that light, got the exact same one and it’ll burn em. Powerful little tool

It just took a day and some of em went droppy..like expected. So I backed it off to 25% and hung it a little higher. Got around 130ppfd now, let's see if they can take it. If not maybe drop it down to 5% and get closer or I switch to the burple light again and wait for new growth.

 

[Redneckx]

Day 41
Backed of the light to 5% now the clones get around 50ppfd, when all rootet I bumb it back to 25%.

 

[Redneckx]

It just took a day and some of em went droppy..like expected. So I backed it off to 25% and hung it a little higher. Got around 130ppfd now, let's see if they can take it. If not maybe drop it down to 5% and get closer or I switch to the burple light again and wait for new growth.View attachment 2370040

Only 6 clones need to root, others are heading veg soon.
Really happy there will be a next round! When the 6 rooted they will be gifted to a friend.

 

[jadins_journey]

It just took a day and some of em went droppy..like expected. So I backed it off to 25% and hung it a little higher. Got around 130ppfd now, let's see if they can take it. If not maybe drop it down to 5% and get closer or I switch to the burple light again and wait for new growth.View attachment 2370040

Just noticed these were cut from flower, gonna have some re-veg growth. Some crazy stuff to watch with todays genetics. I used to not run mothers and took cuttings from flower. Granted all ways before day 10, but I can't even do that these days without a re-veg. So I went to young mothers.
I'll be watching how these roll

 

[Redneckx]

Just noticed these were cut from flower, gonna have some re-veg growth. Some crazy stuff to watch with todays genetics. I used to not run mothers and took cuttings from flower. Granted all ways before day 10, but I can't even do that these days without a re-veg. So I went to young mothers.
I'll be watching how these roll

Yeap, got hooked after I reading about monstercropping and I was like....that's totally nuts, let's goo!

Don't really like common clones lol, and this type does even look shittier, can't wait to see those Frankenstein clones
Don't have the space to run mother's and still got too many different varieties left, I gotta try..so it's no option to go for one mother over a couple runs.

Best choice for me is to take several cuttings the current run, let them root and start reveg, when others going to finish..no need to hurry.

Sounds fun to treat young innocent mothers

 

[Redneckx]

Having a good time in front of my lady's, fade is commin'

 

[Redneckx]

Foliar sprayed the clones today, all rooted ones gone crazy!

And some new leaves popping up

They need to remain in those pots for like three weeks..until others finished.
I'll like to get a complete rootball and not roots gowing out into the clays below.
When it's time to repot, most of my roots will get ripped apart when pulling it out...

Any suggestions?

Maybe I cut (all roots outside) now, to promote upper root growth and slow down growing outside?
Before repot, to avoid pulling at them, heared it leads to more stress instead cutting it?
Or I just leave em like they are, let them root more outside the pots and during repot I drag out what I can...¿

Can I cut off some nodes to bring them in shape and not ending up with too many colas(planning sog).
Left as much as i could to get quick rooted clones, waited until healthy roots appear to cut some of the nodes away.
is it too much stress, too early and will it increase herma potential?
E.g. @jadins_journey any thoughts?

 

[jadins_journey]

Foliar sprayed the clones today, all rooted ones gone crazy!
View attachment 2374377View attachment 2374378View attachment 2374379View attachment 2374380

And some new leaves popping up View attachment 2374381
They need to remain in those pots for like three weeks..until others finished.
I'll like to get a complete rootball and not roots gowing out into the clays below.
When it's time to repot, most of my roots will get ripped apart when pulling it out...

Any suggestions?

Maybe I cut (all roots outside) now, to promote upper root growth and slow down growing outside?
Before repot, to avoid pulling at them, heared it leads to more stress instead cutting it?
Or I just leave em like they are, let them root more outside the pots and during repot I drag out what I can...¿

Can I cut off some nodes to bring them in shape and not ending up with too many colas(planning sog).
Left as much as i could to get quick rooted clones, waited until healthy roots appear to cut some of the nodes away.
is it too much stress, too early and will it increase herma potential?
E.g. @jadins_journey any thoughts?

If a plant is stable (genetically speaking) stress from training isn’t going to hurt.

Now that problem with losing roots when transplanting is one we all share no matter the growing style. My solution is a double pot; inner pot has holes outer pot has no bottom. Leave them in the inner pot when they transplant. Doesn’t seem to effect yield

 

[Redneckx]

If a plant is stable (genetically speaking) stress from training isn’t going to hurt.

Now that problem with losing roots when transplanting is one we all share no matter the growing style. My solution is a double pot; inner pot has holes outer pot has no bottom. Leave them in the inner pot when they transplant. Doesn’t seem to effect yield View attachment 2375218

Yeah the genetics seem to be pretty stable.
Gave them a new haircut.

What a nice method to avoid unnecessary stress.
Don't like transplant the clear pots even if it doesn't effect yield or anything else.
I hope that drying of the roots comming out to die off and stop growing down. If it's not going to happen this way I think about to transplant em directly.

Next time I make some new pots to skip transplanting the hard way, thank you for those information!!

 

[carlosescobar]

Yeah the genetics seem to be pretty stable.
Gave them a new haircut.

What a nice method to avoid unnecessary stress.
Don't like transplant the clear pots even if it doesn't effect yield or anything else.
I hope that drying of the roots comming out to die off and stop growing down. If it's not going to happen this way I think about to transplant em directly.

Next time I make some new pots to skip transplanting the hard way, thank you for those information!!

ive got a question redneck, i believe you had a xs 1500 light, did you ever have it on 100% during flower , as soon as i go past 60% i get burning and curling and im 2 weeks from harvest , so i would like to pump it up a bit