Eeri
- 61
- 18
EDIT!
DO NOT FOLLOW THIS TEK BLASTING BHO WITH PLASTIC DEVICES. HEALTH RISK!!!
Here's what you need:
Water bottle with large cap
Coffee filter
Rubberband
Butane
A cooking pot
Maybe a drill set.
First grab the water bottle and poke a few 1/8 inch holes in the cap. The poke a hole in the bottom the exact size of your butane bottles neck. There should be two sizes to it. Drill for the small one. What I did is take a screw driver the same size and heated it up and poked it through. Now that you've got your bottle ready fill it with ground up weed. Put the coffee filter over the cap and secure it with a rubber band. Turn it up side down and force butane through the hole in the bottom. Depending on the quality and quantity of your weed you will need more or less butane. I used 3/4 oz of shake to an almost full 5.5 oz bottle through. All this butane will collect in the pot as liquid. Then I through in another 3/4 oz of trim to the liquid. Mixed it all around with hands. The let sit in sun for about an hour to evaporate the butane. When you can see no more vapor shadows coming off the weed in the sunlight it has been in the sun long enough. Then you can take the weed mixed with the oil. Set it aside. Fill the bottle with fresh trim and run more butane through into the pot. Then throw in your final product again and Walla. 3 x trim. Going to try my first batch soon but it's only 2 x. Thanks for looking
DO NOT FOLLOW THIS TEK BLASTING BHO WITH PLASTIC DEVICES. HEALTH RISK!!!
Here's what you need:
Water bottle with large cap
Coffee filter
Rubberband
Butane
A cooking pot
Maybe a drill set.
First grab the water bottle and poke a few 1/8 inch holes in the cap. The poke a hole in the bottom the exact size of your butane bottles neck. There should be two sizes to it. Drill for the small one. What I did is take a screw driver the same size and heated it up and poked it through. Now that you've got your bottle ready fill it with ground up weed. Put the coffee filter over the cap and secure it with a rubber band. Turn it up side down and force butane through the hole in the bottom. Depending on the quality and quantity of your weed you will need more or less butane. I used 3/4 oz of shake to an almost full 5.5 oz bottle through. All this butane will collect in the pot as liquid. Then I through in another 3/4 oz of trim to the liquid. Mixed it all around with hands. The let sit in sun for about an hour to evaporate the butane. When you can see no more vapor shadows coming off the weed in the sunlight it has been in the sun long enough. Then you can take the weed mixed with the oil. Set it aside. Fill the bottle with fresh trim and run more butane through into the pot. Then throw in your final product again and Walla. 3 x trim. Going to try my first batch soon but it's only 2 x. Thanks for looking
Last edited by a moderator: