In need of a rosin press

[Smokinwitwheezer]

What’s up growing fam! I’ve been growing for a few years now and wanted to start making some wax. I’ve been looking for a good rosin press but not a commercial one, not trying to spend a a bunch of money when it’s just for personal. Please if you have any good brands let me know, im looking online but not finding a low temp press, I appreciate it!

 

[SchweddyBawlz]

That is the one i have. Dabpress 10T. Only thing i don’t like about it is not having a PSI gauge….so the learning curve is a bit steeper.

Works well. Can crush 2 1/2oz pucks in about 6 minutes @ 185deg. I wanna say it was $400 and change. I ordered it right from their website. Came with a bunch of extras.

I didnt go with nugsmasher because it is super expensive for what you get. And i am not spending $2K for one of their better presses.

 

[AZreefer]

What’s up growing fam! I’ve been growing for a few years now and wanted to start making some wax. I’ve been looking for a good rosin press but not a commercial one, not trying to spend a a bunch of money when it’s just for personal. Please if you have any good brands let me know, im looking online but not finding a low temp press, I appreciate it!

Like everything you get what you buy. Go inexpensive with a tool like this and my experience says you will regret it. There is a minimum pressure you need to make quality rosin. I believe its 4 ton min. So if you buy one of the less costly units aim for a 5 ton or better.

 

[AZreefer]

View attachment 2228360

That is the one i have. Dabpress 10T. Only thing i don’t like about it is not having a PSI gauge….so the learning curve is a bit steeper.

Works well. Can crush 2 1/2oz pucks in about 6 minutes @ 185deg. I wanna say it was $400 and change. I ordered it right from their website. Came with a bunch of extras.

I didnt go with nugsmasher because it is super expensive for what you get. And i am not spending $2K for one of their better presses.

As a former wood butcher i really like the table! Well done.

 

[Smokinwitwheezer]

View attachment 2228360

That is the one i have. Dabpress 10T. Only thing i don’t like about it is not having a PSI gauge….so the learning curve is a bit steeper.

Works well. Can crush 2 1/2oz pucks in about 6 minutes @ 185deg. I wanna say it was $400 and change. I ordered it right from their website. Came with a bunch of extras.

I didnt go with nugsmasher because it is super expensive for what you get. And i am not spending $2K for one of their better

View attachment 2228360

That is the one i have. Dabpress 10T. Only thing i don’t like about it is not having a PSI gauge….so the learning curve is a bit steeper.

Works well. Can crush 2 1/2oz pucks in about 6 minutes @ 185deg. I wanna say it was $400 and change. I ordered it right from their website. Came with a bunch of extras.

I didnt go with nugsmasher because it is super expensive for what you get. And i am not spending $2K for one of their better presses.

Thanks for the advise its much appreciated!

 

[Smokinwitwheezer]

Like everything you get what you buy. Go inexpensive with a tool like this and my experience says you will regret it. There is a minimum pressure you need to make quality rosin. I believe its 4 ton min. So if you buy one of the less costly units aim for a 5 ton or better.

As a former wood butcher i really like the table! Well done.

Awesome thank you for the help!

 

[jadins_journey]

12 Ton from Dabpress. A little pricey but I like it. This is one of those pieces of equipment that the phrase "Buy once, cry once" comes into mind. The 10 ton will save you $90, this one is $609 online

 

[Smokinwitwheezer]

12 Ton from Dabpress. A little pricey but I like it. This is one of those pieces of equipment that the phrase "Buy once, cry once" comes into mind. The 10 ton will save you $90, this one is $609 online
View attachment 2228368

Uff she’s a beauty, cool thank you

 

[SchweddyBawlz]

As a former wood butcher i really like the table! Well done.

Lol…i threw that table together in like 30 minutes.

I stood on it to make sure it was sturdy. Table didnt move with my 250lb frame standing on it.

Figured it was good

12 Ton from Dabpress. A little pricey but I like it. This is one of those pieces of equipment that the phrase "Buy once, cry once" comes into mind. The 10 ton will save you $90, this one is $609 online
View attachment 2228368

i almost went with that one, but i didnt like the separate pump. It looks like it would have been awkward for me to use.

But dabpress ya gotta go with the separate pump if you wanna have a gauge.

I wish there was some way to add a gauge to mine…:::.

 

[jadins_journey]

Lol…i threw that table together in like 30 minutes.

I stood on it to make sure it was sturdy. Table didnt move with my 250lb frame standing on it.

Figured it was good

i almost went with that one, but i didnt like the separate pump. It looks like it would have been awkward for me to use.

I thought so but it turns out I am really glad I went with the porta -power pump. Set the pump where your upper body does the work and not your arm. Not an issue for the young ones but I’m 60 ish and the upper body strength ain’t what it was

jj

 

[jadins_journey]

Last thing me and a buddy did was some wax. He’s my age +_ and you see where the pump ended up, below waist level. Let your body weight do the work. You notice the controls up and out of the way.
Dabpress is worth it

 

[Natep]

I have a 4 ton. I don’t really like it. If I was looking I would get something with a higher ton and a pressure gauge.

 

[BudRanger1919]

Please listen to the boys and girls here. Don't cheap out, not on a Rosin Press. Ill admit my mistake. I spent about 1/2 the money I should have on a press, its a hand lever press with accurate temp controls. Its not a hand-crank, its a hand-lever, so it can only be set to 1 final press weight which is NOT what you want. You want to be able to crank it up slowly to avoid blowout and get a much better flow

Does it work? Yes, absolutely.
Does it work WELL? Nowhere near as well as my friends PROPER rosin press like the ones posted by users above.
Can you press more than 7-14 grams at a time? No.
Verdict? I should have spent more money and got a crank-it-up press.

 

[Smokinwitwheezer]

Awesome thank you everyone for the advise, its much appreciated!

 

[Natep]

I think ideally about 10 ton with adjust temp and pressure gauge. But you will want your hash game to be on point before you need one.

 

[Jackbstalk]

5 ton pure pressure rosin press for sale no issues just need to move and get rid of

 

[Jackbstalk]

5 ton pure pressure rosin press for sale no issues just need to move and get rid of View attachment 2260737

2K negotiable in SOCAL