[PK1]

Website: https://inkbird.com/
THC Farmer sponsor: @inkbird
Amazon Link Canada :
Amazon link USA:

​

 

[PK1]

Today, i received an package from Inkbird to review their WiFi IPT-2CH Smart Thermostat Temperature Controller.
It has a very slick and modern packaging and well isolated so that the parts don't get damaged.
I was able to setup everything with in few minutes and it got warm pretty quickly. The App and connection to wifi was fairly simple and it gives you an peace of mind on what the temperatures are. Currently i am using a single matt to warm up the growing container that the BB cheese are in.

 

[PK1]

ok so, after playing with it a bit more and go through the instructions, i decided to do some minor changes.
I took one of the sensors out as they both perform the same thing but for separate "work" bank/station. depends what you wanna call it lol!
The app on iphone is called Inkbird Pro. I can only assume that would be for Samsung or other mobiles as well. Do keep in mind that there are two Inkbird apps, but you want the pro for this model.
Here are some pictures until next update, Pro's & Con's

 

[PK1]

Here is my final update on the product:

Inkbird WiFi IPT-2CH Smart Thermostat Temperature Controller Pro's:

The mobile app makes it really easy to adjust and or find out what the temperatures are. This is not only perfect equipment for growing clones, but can be used on Reptiles or animals that have a particular need for certain temperature.

Downloading the app for mobile was super fast and with in minutes I was able to setup the Inkbird WiFi IPT-2CH Smart Thermostat Temperature Controller in my phone and get the temperatures set.

I used a strap to hold the device inside the tent. However, The sensors and matt wires are about 1.5 ft long i believe. The electricity wire for the box is short.

Inkbird WiFi IPT-2CH Smart Thermostat Temperature Controller Cons:
With the short time of using this product, I did not find any cons. If i have to be picky, i would say the electricity wire of the box is short which makes wire management difficult.

This product review is now complete and this thread can be closed.
If you like to follow how the BB cheese clones do, than follow the link below

BB Cheese grow in ProMix Hp | Spider Farmer SE-3000

Tent=2x2x8 | Flower room 4x6x10 Light= SE3000 @SpiderFarmerLED Nutrients= Mega Crop Two Parts | Green Leaf Nutrients | @greenleafnutrients Soil = ProMix Hp (reused soil) ok so, before sending my current grow into flower i took some clones from the...

www.thcfarmer.com

 

[Mr.GreenthumbOG]

Looks like another fine product from @inkbird, I’ve got several of their products, my favourite one is the meat probe to cook food on the bbq
thanks @PK1 for the info

 

[PK1]

Looks like another fine product from @inkbird, I’ve got several of their products, my favourite one is the meat probe to cook food on the bbq
thanks @PK1 for the info

Thanks dude! ya, i noticed they have allot of home smart goodies

 

[iX_Lazy_Xi]

@PK1 did set point of 84 keep you pretty constant at 74 inside the dome

 

[PK1]

@PK1 did set point of 84 keep you pretty constant at 74 inside the dome

i set the low and high on the app and it has kept it fairly to close to my numbers

 

[bbachrac]

So far I haven't been able to connect the IPT-CH2 to the iPhone App in either SmartMode or AP Mode. In App mode it needs a password to connect to SmartLife.
I put the wifi router in 2.5GHZ mode. So far no response from Inkbird Support.
I can use it in manual mode...