milwaukee 802 users

[Venom818]

Which table is the Milwaukee set to .thnx

 

[Venom818]

bump, no one knows

 

[Cort]

.68



I googled.

 

[motherlode]

did you jsut get a new meter?

 

[Venom818]

nah ive had it for a minute but was curious as to what chart it belongs to in ppm it reads ec so im cool but just curious.

 

[Venom818]

.68



I googled.

so which one would it be on that chart or is there a different chart.

 

[Cort]

It dont paste well from pdf but were you not looking for the conversion factor?



SPECIFICATIONS:
MW801 MW802
RANGE 0.0 to 14.0 pH 0.00 to 14.00 pH
0 to 1990 ppm 0 to 4000 ppm
0 to 1990 μS/cm 0.00 to 6.00 mS/cm
RESOLUTION 0.1 pH 0.10 pH
10 ppm 10 ppm
10 μS/cm 0.01 mS/cm
ACCURACY ± 0.2 pH ±0.20 pH
(@ 20ºC) ±2% Full scale ±2% Full scale
CALIBRATION M10007B (pH 7.01)
SOLUTIONS M10031B (1.413 mS/cm)
M10032B (1382ppm) M10442B (1500ppm)
CONVERSION 0.5 0.68
FACTOR
CALIBRATION Manual, at 1 point
TEMPERATURE COMPENSATION
Automatic from 0 to 50ºC
PROBE MA850DIN combination pH/EC/TDS probe
ENVIRONMENT 0 to 50ºC, 95%RH max
BATTERY LIFE /TYPE 1x9V alkaline
approx. 150 hours of use
DIMENSIONS 143 x 80 x 32 mm
WEIGHT 220 g (with battery

 

[Venom818]

It dont paste well from pdf but were you not looking for the conversion factor?



SPECIFICATIONS:
MW801 MW802
RANGE 0.0 to 14.0 pH 0.00 to 14.00 pH
0 to 1990 ppm 0 to 4000 ppm
0 to 1990 μS/cm 0.00 to 6.00 mS/cm
RESOLUTION 0.1 pH 0.10 pH
10 ppm 10 ppm
10 μS/cm 0.01 mS/cm
ACCURACY ± 0.2 pH ±0.20 pH
(@ 20ºC) ±2% Full scale ±2% Full scale
CALIBRATION M10007B (pH 7.01)
SOLUTIONS M10031B (1.413 mS/cm)
M10032B (1382ppm) M10442B (1500ppm)
CONVERSION 0.5 0.68
FACTOR
CALIBRATION Manual, at 1 point
TEMPERATURE COMPENSATION
Automatic from 0 to 50ºC
PROBE MA850DIN combination pH/EC/TDS probe
ENVIRONMENT 0 to 50ºC, 95%RH max
BATTERY LIFE /TYPE 1x9V alkaline
approx. 150 hours of use
DIMENSIONS 143 x 80 x 32 mm
WEIGHT 220 g (with battery

yes thank you for all your help bro

its the Hanna one Venom, .5 conv. your ppm's are exactly 1/2 of the E.C. ie, EC 1.0 is 500 ppm's.

thank you bro

 

[H3AD_CAS3]

its the Hanna one Venom, .5 conv. your ppm's are exactly 1/2 of the E.C. ie, EC 1.0 is 500 ppm's.

this is not correct. The conversion factor for the 801 is .5, while the conversion factor for the 802 is .68. Multiply your EC by 680 to find your PPM's.