Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
My plants will be in week 5 of flowering monday whats going on with the discolor and crisping of leaves?
Discussion below · 31 replies
Page 1 of 2
·
Replies 1–20 of 32
Nugg
- Posts
- 702
- Reactions
- 882
- Joined
- Apr 16, 2018
- Points
- 93
Maybe start by listing everything.. medium,ppm,pH,rh,lights,light distance,what you are feeding and how....
Or it's like..hey my trucks not running right..what's wrong with it..lol
Or it's like..hey my trucks not running right..what's wrong with it..lol
GNick55
Staff
Supporter
- Posts
- 15,379
- Reactions
- 49,215
- Joined
- Jan 11, 2020
- Points
- 438
is it all near the tops?
or throughout from top to bottom?
could be nutes are off, light/heat stress..
you kinda have to list your growing situation, plant strain.
don’t worry!
it will get figured out.
or throughout from top to bottom?
could be nutes are off, light/heat stress..
you kinda have to list your growing situation, plant strain.
don’t worry!
it will get figured out.
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Maybe start by listing everything.. medium,ppm,pH,rh,lights,light distance,what you are feeding and how....
Or it's like..hey my trucks not running right..what's wrong with it..lol
Im using fox farm ocean forest..Im feeding it fpj, l.a.b.s, cal-mag, roots organic bloom powder, tiger bloom, my ppms are betwewn 1100 ams 1400 and Im also using water ph at 6.0 6.5Maybe start by listing everything.. medium,ppm,pH,rh,lights,light distance,what you are feeding and how....
Or it's like..hey my trucks not running right..what's wrong with it..lol
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Mostly at the top Im using hydro farm phantom 1000 de....light is 25 inches away at 1000 watts.....this amis triangle kush x 92og xdead head ogis it all near the tops?
or throughout from top to bottom?
could be nutes are off, light/heat stress..
you kinda have to list your growing situation, plant strain.
don’t worry!
it will get figured out.
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
GNick55
Staff
Supporter
- Posts
- 15,379
- Reactions
- 49,215
- Joined
- Jan 11, 2020
- Points
- 438
thanks, people are here to helpIm using fox farm ocean forest..Im feeding it fpj, l.a.b.s, cal-mag, roots organic bloom powder, tiger bloom, my ppms are betwewn 1100 ams 1400 and Im also using water ph at 6.0 6.5
ok, everything seems proper, lights at 25 inches is prime, it could be burning them with light or heat, kinda why you see damage at top area if plant, maybe raise light about 4/5 inches higher?Mostly at the top Im using hydro farm phantom 1000 de....light is 25 inches away at 1000 watts.....this amis triangle kush x 92og xdead head og
kinda a trail and error thing, though just keep checking here for replies to your concern, should get some answers, than google them and decide.
Beachwalker
- Posts
- 7,055
- Reactions
- 14,445
- Joined
- Apr 10, 2019
- Points
- 313
Your ppm's are too high, next feeding flush it well with plain pH water at 6.5Im using fox farm ocean forest..Im feeding it fpj, l.a.b.s, cal-mag, roots organic bloom powder, tiger bloom, my ppms are betwewn 1100 ams 1400 and Im also using water ph at 6.0 6.5
Don't know what half of what you say you're feeding is but cut the total ppm about in half
And your pH needs to be set at 6.5 in that Medium, good luck
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Thanks for your time I appreciate itthanks, people are here to help
ok, everything seems proper, lights at 25 inches is prime, it could be burning them with light or heat, kinda why you see damage at top area if plant, maybe raise light about 4/5 inches higher?
kinda a trail and error thing, though just keep checking here for replies to your concern, should get some answers, than google them and decide.
GNick55
Staff
Supporter
- Posts
- 15,379
- Reactions
- 49,215
- Joined
- Jan 11, 2020
- Points
- 438
also you don’t really want fans blowing directing on the plants, if i’ve seen that correctly in the video, otherwise looks good!thanks, people are here to help
ok, everything seems proper, lights at 25 inches is prime, it could be burning them with light or heat, kinda why you see damage at top area if plant, maybe raise light about 4/5 inches higher?
kinda a trail and error thing, though just keep checking here for replies to your concern, should get some answers, than google them and decide.
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Thats the ppms for the co2 levels and Im practicing Korean natural farming look at these plants I only been feeding with fermented plant juice (fpj) and labsppm's are too high, next feeding flush it well with plain pH water at 6.5
Don't know what half of what you say you're feeding is but cut the total ppm about in half
And your pH needs to be set at 6.5 in that Medium, good luck
Attachments
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
I was thinking the same thing do u think that apart of the problem?also you don’t really want fans blowing directing on the plants, if i’ve seen that correctly in the video, otherwise looks good!
oldskol4evr
- Posts
- 12,306
- Reactions
- 36,504
- Joined
- Oct 18, 2015
- Points
- 438
are you feeding lab with every feeding,also why cal magIm using fox farm ocean forest..Im feeding it fpj, l.a.b.s, cal-mag, roots organic bloom powder, tiger bloom, my ppms are betwewn 1100 ams 1400 and Im also using water ph at 6.0 6.5
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Yesare you feeding lab with every feeding,also why cal mag
oldskol4evr
- Posts
- 12,306
- Reactions
- 36,504
- Joined
- Oct 18, 2015
- Points
- 438
agree all them small ones around 300 to 450 ppm,plus is that a sulfur burner hanging in room?Your ppm's are too high, next feeding flush it well with plain pH water at 6.5
Don't know what half of what you say you're feeding is but cut the total ppm about in half
And your pH needs to be set at 6.5 in that Medium, good luck
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Ppms re around 300 400 that was the co2 levelsagree all them small ones around 300 to 450 ppm,plus is that a sulfur burner hanging in room?
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
A propane burner autopilot 4 burnerPpms re around 300 400 that was the co2 levels
oldskol4evr
- Posts
- 12,306
- Reactions
- 36,504
- Joined
- Oct 18, 2015
- Points
- 438
ok look at your feed chart ,the smaller plants arent gonna take as much as the bigger plants,to much lab can become toxic,also cal mag isnt in the knf feed schedule,cal and phos are but not cal mag,each cal and phos are feed at difrent intrevals
oldskol4evr
- Posts
- 12,306
- Reactions
- 36,504
- Joined
- Oct 18, 2015
- Points
- 438
ok i cant see how you acheive this,with all in same room,small one be 3 to450 ,the bigger ones should roll around 750,feed schedules are completly difrent also if your using knf,way difrentPpms re around 300 400 that was the co2 levels
Varsityredz
- Posts
- 33
- Reactions
- 19
- Joined
- Dec 16, 2019
- Points
- 8
Im practicing not full on in with the knf I know how to make calcium and a couple more outputsok look at your feed chart ,the smaller plants arent gonna take as much as the bigger plants,to much lab can become toxic,also cal mag isnt in the knf feed schedule,cal and phos are but not cal mag,each cal and phos are feed at difrent intrevals
Page 1 of 2
·
Replies 1–20 of 32