M
Mr.Mow
- Posts
- 5
- Joined
- Mar 8, 2011
Hello Farmers,
I saw that some of you out there have been using Tamisium Extractors of your own while I was doing some honey research. I just recently got mine in the mail yesterday and I was hoping you all might be able to help me with some pointers or a breakdown of your extraction methods. I hope not to take up too much of time burdening you with questions but I would be most grateful if someone could help me with a few queries.
I got the super deluxe package and some of the things which gave me the most difficulty were figuring out how to load in the butane, how to load the secondary solvent and where (i used everclear, which MTGrower had recommended) and also the placement of the lids.
The owners manual shows the machine set up different ways, the lids on the recovery tank (the first tank where the solvent is loaded) and the column are shown one way in some pictures and another in some. The lid with the female SS quick release coupling is on the column and the male nipple is on the recovery tank in their videos and on the first diagrams on the manual but in later pictures they show the lids reversed it seems, the female coupling on the recovery tank and the male nipple on the column lid. This I think was what caused me the most confusion in the butane loading process.
I would appreciate any insight into the process a farmer could help me with; Thanks for taking the time to look over my message and I hope to contribute much in the days to come about the Tamisium and all of its capabilities
:bongsmi:
PS. Does anyone do any preparations to their buds prior to extraction? I had seen some posts that discussed the possibility of a better yield if one did a light heating or an alkaline wash; Although, I heard this claim countered with that this is only useful if one is going to do BHO cooking for carboxylation. I am not sure of the accuracy of this so does anyone have some insight?
Best Regards,
Mr. Mow
I saw that some of you out there have been using Tamisium Extractors of your own while I was doing some honey research. I just recently got mine in the mail yesterday and I was hoping you all might be able to help me with some pointers or a breakdown of your extraction methods. I hope not to take up too much of time burdening you with questions but I would be most grateful if someone could help me with a few queries.
I got the super deluxe package and some of the things which gave me the most difficulty were figuring out how to load in the butane, how to load the secondary solvent and where (i used everclear, which MTGrower had recommended) and also the placement of the lids.
The owners manual shows the machine set up different ways, the lids on the recovery tank (the first tank where the solvent is loaded) and the column are shown one way in some pictures and another in some. The lid with the female SS quick release coupling is on the column and the male nipple is on the recovery tank in their videos and on the first diagrams on the manual but in later pictures they show the lids reversed it seems, the female coupling on the recovery tank and the male nipple on the column lid. This I think was what caused me the most confusion in the butane loading process.
I would appreciate any insight into the process a farmer could help me with; Thanks for taking the time to look over my message and I hope to contribute much in the days to come about the Tamisium and all of its capabilities
:bongsmi:
PS. Does anyone do any preparations to their buds prior to extraction? I had seen some posts that discussed the possibility of a better yield if one did a light heating or an alkaline wash; Although, I heard this claim countered with that this is only useful if one is going to do BHO cooking for carboxylation. I am not sure of the accuracy of this so does anyone have some insight?
Best Regards,
Mr. Mow