L
Leonking
- 32
- 18
Sounds legit as hell bro. Welcome to the farm.So I'm new to Indoor grow. Have done very well with outdoor grows til this last year.
Bug infestation was a major problem.
Decided to grow Indoor in a 9x9 grow tent.
Products:
9x9 Gorilla tent w/ extension. 8' total height.
2- 4x8 grow trays.
4- Gavita 1700e LEDs
1- 10" A/C infinity fan with carbon filter inside tent
1- A/C infinity fan w/ filter and silencer outside tent for cool air intake from Mini split a/c.
4- 6" fans inside tent to help with air flow circulation
Ideal-Air commercial Grade humidifier
Frigidaire dehumidifier
Trolmaster hydro X system controlling everything.
Co2 system
Leader Ecotronic pump
Water chiller set at 70' F
Trolmaster Aqua X for irrigation control
Trolmaster moisture meter
Growing 60 clones on Super Lemon Haze on 4" Grodan cubes on top of Growdan slabs. 2 floraflex .5 Emmiters per cube.
I have a cpl of questions.
1. How long to run pump for feed.
Currently- first feed starts 2 hrs after lights on and every hour after.
Last feed is 3 hrs before lights off .
Light schedule is currently at 18/6
Lights on at 10pm thru 1400pm .
2. What percentage should moisture meter show at lights off? Currently, there is little to no run off and displays 25% at lights off... meter located at bottom of 4" Cube just above slab
Ec- .4
PH-5.9
Tent temp 81-82' constant
Lights at 85%
Measure the volume that 7sec gives you and measure the runoff volume, ph and ppm. That info will help others help youForgot to mention that currently, the pump is set at 7 sec per feeding.
So ran the test twice at 2 different stations.Measure the volume that 7sec gives you and measure the runoff volume, ph and ppm. That info will help others help you
Thanks for the advice... this helps a lot.Here is a feeding chart that @tobh hooked us up with. I go with this and then minor adjustment to what i want it to be since our pumps and setup is slightly different. I've found that depending on vegative or generative feeding i want different amount of waste. I do 10% waste for veggative and 5% waste for generative. It's good to have the timer at 1 min so you can figure exactly how much fluid you get in that min. With a valve or a ballvalve you can adjust the pressure of the feed for micro adjustment.
Welcome to the farm!
View attachment 1278644
So I made the adjustments to my feeding system. Thanks again gor the chart.Here is a feeding chart that @tobh hooked us up with. I go with this and then minor adjustment to what i want it to be since our pumps and setup is slightly different. I've found that depending on vegative or generative feeding i want different amount of waste. I do 10% waste for veggative and 5% waste for generative. It's good to have the timer at 1 min so you can figure exactly how much fluid you get in that min. With a valve or a ballvalve you can adjust the pressure of the feed for micro adjustment.
Welcome to the farm!
View attachment 1278644
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?