NFT Jan 2023 gsc,pk,cck,er

Frostie069 · Dec 31, 2022

Hi,

tomorrow will be week 2 veg in NFT
(day 24 from seed)
1X GSC
2X cotton candy kush
2X purple kush
1X eleven roses

Frostie069 · Jan 18, 2023

few update photos.

snapped a branch yesterday on a GSC, start of the manifold bends didn't go well. I don't know if it's the LEDs or NFT but never snapped one before, they seem 'crisper' than other methods.

A couple have been added late hence the size difference.

Being my 3rd grow im still learning. Biggest one is dialling into nutrients and plants. Im getting better at it. Nutrients can be my best friend or my worst nightmare, but I'm cracking the code slowly through trial and error.

the line up is now:
2x Girl Scout cookies
2x cotton candy kush
1x do-si-dos
2x purple kush

GreenGalaxyFarm · Feb 8, 2023

interesting setup brother! time for an update as well!
getting into nft myself, will start building this coming weekend. im finding it hard to get good info regarding nft systems growing cannabis, and my only option were 2x4 channels specifically for nft(not budget friendly)and 110mm pvc pipe used in plumbing(much more budget friendly). i guess ill be learning as i build and grow using the setup. my thread if you keen to follow along https://www.thcfarmer.com/threads/hydro-res-air-and-circulation-pumps-chillers-and-ozone.146562/

Frostie069 · Feb 12, 2023

Hi,

Week 8 Veg. I know, 8 weeks veg is a long time.

I have been pretty lazy and late to the party with this grow. Too slow raising EC levels, too slow raising lighting levels, too late on first topping cuts etc which has prolonged the veg process.

There has also been some troubles with "age" difference between plants as I germ'd a couple of beans a couple of weeks after the rest. I thought I'd get them to catch up and EC wouldn't be an issue however I was quite wrong.

I've spent the last week working hard to get things humming along again.

Did a 100% reservoir water change out and upped the EC. Upped the lighting levels twice so now they're getting approx 25k LUX. Tied them down and made some more cuts and upped the EC level a bit more. They're back to humming along.

I'm at work for a week but plan on flicking them over to 12/12 when I return home.

Frostie069 · Feb 16, 2023

5 day growth comparison photos from the last posted
turned the lights out today, I'll give them a day and a half in darkness before going 12/12.
I threw a tarp over the tent just to help avoid any light getting in.
I also bought a 135L tub today so I'll be doubling my res capacity, I may get two and connect them, 270L.

GreenGalaxyFarm · Feb 16, 2023

looking really good

Frostie069 · Feb 16, 2023

GreenGalaxyFarm said:
looking really good

thanks mate, they're eating like crazy at the moment, I think I'm going to go and buy another 135L tub today and connect the two so go from 65L capacity to 270L capacity.

Frostie069 · Feb 20, 2023

still going with the maintenance everyday.
12/12 lighting now so my time daily is limited.
I made a DIY net over the weekend, yesterday it went in the tent, big last chop, got rid of anything that won't produce anything significant etc.
today is more removal of things I missed from the plants yesterday, adjusting the plants for the 2nd time through the netting, roots check and adjust, raise fans and camera and a going to flower clean up!!
New reservoir is drying, the through plastic fittings are siliconed in, this is to join the two tubs. I need this running before I go to work for a period of time next week.

roots!

Frostie069 · Feb 21, 2023

order arrived

steamroller · Feb 21, 2023

Nice set up and grow!

Frostie069 · Feb 21, 2023

steamroller said:
Nice set up and grow!

thanks!!

Frostie069 · Feb 21, 2023

tents clean, nettings in and dehumidifier is clean, in and on. side lighting is in the tent but not operational or setup properly yet.
I've almost caught up on maintenance.
New res should be finished and drying today. Hopefully operational in 48hrs. The res would actually be finished if I wasn't so high all the time and kept coming home with the wrong size fittings. One was completely different fitting altogether. fml

Happy Gorwing

steamroller · Feb 21, 2023

Frostie069 said:
New res should be finished and drying today. Hopefully operational in 48hrs. The res would actually be finished if I wasn't so high all the time and kept coming home with the wrong size fittings. One was completely different fitting altogether. fml

Happy Gorwing

Sorry, but been there still do that!

SweetLeafGrow · Feb 21, 2023

Looking awesome in there, can't wait to see you flower these!

You guys are lucky, I have no place local where I can get this kind of stuff so if I mess up it's a much longer screw up, lol. I can get basic pvc stuff but nothing beyond that. If I am lucky enough to find something I can use, they bend ya over....$6 a foot for some 3/4" tubing, I about fell over.

Frostie069 · Feb 21, 2023

SweetLeafGrow said:
Looking awesome in there, can't wait to see you flower these!

You guys are lucky, I have no place local where I can get this kind of stuff so if I mess up it's a much longer screw up, lol. I can get basic pvc stuff but nothing beyond that. If I am lucky enough to find something I can use, they bend ya over....$6 a foot for some 3/4" tubing, I about fell over.

thanks, me too!!!, I'm only onto my 3rd grow with NFT. Ive ran into issues the last two grows, I'm hoping I've ironed all the wrinkles out and I make it too my first success finished grow.......

this was posted by moe elsewhere, not sure if it helps you.....

CropKing Inc

Controlled environmental agriculture, hydroponic and greenhouse experts for over 40 years.

cropking.com

Frostie069 · Feb 23, 2023

so yesterday was a big day.

reservoir is now from 65L to 250L.

after the first test fill and rinse out, sprung a leak, and not at the through plastic siliconed area where I was expecting, nope, from the thread of the valve. delayed the process by 2.5 hours while I siliconed it and let it dry a bit before firing it back up. but FIXED....phew!!!

I have a couple of things added to my list to fix before next grow. I need another lot of pipe connecting the two tubs, water transfer rate between the two is too slow, I am actually using a bypass from my main pump to transfer water from one tub to another as my chiller pump transfers water faster than my current PVC piping can keep up with.

What the upgrade means for me now is I can go to work for my periods of time and not have to worry about running out of water after a few days. Should also be more stable in all aspects.

So the reservoirs now have:
1 main pump feeding NFT
1 chiller and chiller pump
2x filter pumps
1 air pump with 30cm & 40cm air stones
filter wool to filter outlet pipe from NFT also pumps in res sitting on it to lower any vibration

I graduated from using small medicine measuring cups to add nutrients to a big boys cup yesterday. I'd usually add 60ml A or B to last res, now at 200ml for this one.

In the soup: H&G
A&B
amino treatment
multizyme
magnesium
algen extract

First test fill

SweetLeafGrow · Feb 23, 2023

Work of art my bro!

steamroller · Feb 23, 2023

You could make a water bridge with 1 1/2 inch PVC if you wanted to drill holes in lid.
That would help the flow keep up, and you don't have to drain to do.
I run my 180g aquarium sump[ in my basment ] with a 1 1/2 inch water bridge between two sumps and have no problems.

Frostie069 · Feb 23, 2023

last update for a week till I get back from work. been allot of work the last couple of weeks, but I'm all caught up now I think.....

Frostie069 · Mar 4, 2023

Hi!!

yesterday was the start of week 3 FWR.

update shots after returning home from work.

H&G starts bud feeds at week 4, is this a common week to start flowering nutrients?

I received my 3X2 breeding tent this week. exciting!!

happy growing

NFT Jan 2023 gsc,pk,cck,er

NFT Jan 2023 gsc,pk,cck,er

Frostie069

Frostie069

GreenGalaxyFarm

Frostie069

Attachments

Frostie069

GreenGalaxyFarm

Frostie069

Frostie069

Frostie069

steamroller

Frostie069

Frostie069

steamroller

SweetLeafGrow

Frostie069

CropKing Inc

Frostie069

SweetLeafGrow

steamroller

Frostie069

Frostie069

Privacy & Transparency

Privacy & Transparency