Not sure about my CO2 set up need your imput

[gloriousgreen]

Ok i did not put my C.A.P gen2 8 burner up in the air its on concrete bricks about 8 inch of the floor with 3 fan shooting from the back toward my 6 1k lamp


Kinda like that

-----Fan -------------1k lamp 1k lamp 1k lamp

Fan-------Gen2 burner

-----Fan--------------1k lamp 1k lamp 1k lamp


is it ok or should i hang it ?

and another question is i am venting in and out 15 min every 2 hours is ok for a sealed room or should i not get air inside ?


Thx

 

[gloriousgreen]

Or should i just remove the in and out al together and make it a sealed room?

And what should be my temp with the co2 with lights on?

thx

 

[SomeoneYouKnow]

Unless you NEED the fresh air to keep your temp or RH in order, I would cut it out completely.

I vent my "sealed rooms" for 15 minutes every night just to move air around and that is all.

Having the CO2 burner hanging will get you better distribution of the Gas in your room however if you have good air circulation in your room, you should be fine putting your burner wherever you can fit it.

Good Luck - Hope it Helps

SYK

 

[gloriousgreen]

Thx Bud.I removed the air comming in and out.SO its pure co2 sealed room atm i will see with 3 weeks to go.