yes true.....My bulbs are a little purpleWould it be better to use bloom t5 bulbs for cloning. Didn't you say that bloom light spectrum promoted rooting?
Ya I thought u said that... I want to use a cloner that I can run first 2 weeks of veg in. At least topped once before I take it out. And a light that is 10 watts to a 150 watts dimmable for that 3 weeks they are in the cloner.yes true.....My bulbs are a little purple
I have old school phillips plant grow bulbs
they are almost violet
they work really well
I use a super old T-12 fixture just cuz I have had it for years
Good advice! But I also have another tent running Coco, ProMix Blend, Coast of Maine. I'm using NFTG and I wonder since it's so calcium based if I need to add cal mag. Could that burn from before be cal burn?No and dont try to do anything he is doing. What's good for him isn't good for you. Two different medians. You doing fine.... Your next run will be even better.
I used to have great success with taking the cut then chewing the stem a little bit, dip in local honey and then putting it right into a solo cup with lightly amended soil. Right in the kitchen beside the glass door along with siran wrap humidity some propped up with a straw. Just ambient light. Far better success than with the EZ Cloner. That's for sure :mushtache:yeah the clones only need little light....ambient even
clones cant transpire....(release moisture) and they cant feed....all they are doing is sending all energy into regenerating itself by supplying roots
not until roots pop do they need light or feed
I really can't answer this question. What's nftg? Film technique?Good advice! But I also have another tent running Coco, ProMix Blend, Coast of Maine. I'm using NFTG and I wonder since it's so calcium based if I need to add cal mag. Could that burn from before be cal burn?
I really can't answer this question. What's nftg? Film technique?
Why? The cloner should rock ass!I used to have great success with taking the cut then chewing the stem a little bit, dip in local honey and then putting it right into a solo cup with lightly amended soil. Right in the kitchen beside the glass door along with siran wrap humidity some propped up with a straw. Just ambient light. Far better success than with the EZ Cloner. That's for sure :mushtache:
You fucker! I thought you were doing NFT = FILM TECHNIQUESorry, it's a Calcium based microbial based nutrient line. Nectar For The Gods.
Just a Lil bit. I should been asleep 2 hrs sho. My mess are kicking in so if u don't hear from me.. well u know what happened@EventHorizan I'm building out another two site and have a question you down for some design talk?
I mean. I agree. My best guess is temperature being too low and lack of patience. But to me it seems like the spray is so uneven. On some of the spots the spray is blasting the clone. On other spots it's barely getting anything. It was my understanding the angle of the sprayer matters and it's supposed to bounce off the sides of the container and the resulting spray hits the plant.Why? The cloner should rock ass!
You fucker! I thought you were doing NFTG = FILM TECHNIQUE
Does the water level impact the pressure of the sprayer? . Add more sprayers and a bigger pump. Feed more often.I mean. I agree. My best guess is temperature being too low and lack of patience. But to me it seems like the spray is so uneven. On some of the spots the spray is blasting the clone. On other spots it's barely getting anything. It was my understanding the angle of the sprayer matters and it's supposed to bounce off the sides of the container and the resulting spray hits the plant.
Maybe I'm not checking it enough. I never check it lol. Should I be checking water level daily etc?
I'd think not as long as water is covering he pump. The pull of the pump i don't think would be affected much by half a gallon difference. And the whole point of EZ Cloner is so I don't have to do that.Does the water level impact the pressure of the sprayer? . Add more sprayers and a bigger pump. Feed more often.
Cool cool.... I will hit u up when I'm off work.. I do have quite a bit of work left... I got a good start on it...Ok let's talk tomorrow. I need to get some pics to explain properly.
Well what happens? Just no roots?I'd think not as long as water is covering he pump. The pull of the pump i don't think would be affected much by half a gallon difference. And the whole point of EZ Cloner is so I don't have to do that.
I bought the EZCloner because the DIY EZ Cloner also didn't work for me. Lol. So I must be doing something wrong.
Get a aquarium digital heater and set that to 78 degrees.... clones like warmer water. I would put hydtogaurd in it myself..... see if that helps.Well what happens? Just no roots?
I guess I could run tea in it. I've been running sterile just silica, cal mag, hypochloric acid. I ran Tea in the DIY I made.Get a aquarium digital heater and set that to 78 degrees.... clones like warmer water. I would put hydtogaurd in it myself..... see if that helps.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?