If you add the 1/4” connector to the ends of the tubing you will get a harder stream making more surface agitation.
adding a venturi is something id suggest.
There is one part i have on my system that you may want to purchase once i have production models to make that design really haul but a simple venturi will be better than nothing here.
If you add the 1/4” connector to the ends of the tubing you will get a harder stream making more surface agitation.
adding a venturi is something id suggest.
There is one part i have on my system that you may want to purchase once i have production models to make that design really haul but a simple venturi will be better than nothing here.
I have just altered it a bit , adding 4 in line connectors to each plant tote.
I found the mixing rate was a bit slow with it dumping an equal amount back to each so by just doing the 4 I get a much stronger stream for my returns in my reservoir now which will help with that and the streams in my totes , well that really streams now.
Most everything is fine, I had one plant that I was testing the stress on. It was laying on the rocks Thursday morning from a miscommunication between the two of us.
Bit of panic then a swap and everything is ok. I believe she will survive but will need a bit of tlc.
Few drips here are there to deal with but those are now nipped in the butt.
I noticed what looks like a damping off , the back left is what I believe to be too much calmag from not having enough grow.