Rosin is hard after decarb

  • Thread starter Waki
  • Start date
  • Tagged users None
W

Waki

10
3
Hi,hello, after your precious advice I bought a press and tried to make my first pen refills. During the decarb my rosin becomes liquid but as soon as it cools it solidifies. What could be the problem? Little time to decarb? Or some other error? I also tried adding a drop of terpenes later but the result didn't change. I think one drop in my gram is too little to change viscosity.
 
S

Stonemason7767

461
143
Get some 1 mill syringes. They are small.use .10 of a mill for one gram walk it up from there a.05 if you need too. the oil should barely move when in catridge not at all if its cold. It's very stain specific. Some take .10 some take .15 some more. the less terps the better.just heat oil decarb add terps while still hot stir stir stir and inject into carts. Hold on to the tip of syringes while injecting to keep them from poping off. they can do that when the oil is thick its a bummer .
 
S

Stonemason7767

461
143
You will need to winterize the rosin too probly.it ls usually to waxy and fatty to flow through carts.
 
Top Bottom