Log In Register

Schwifty grows under ViparSpectra KS3000 with Multiple Strains from Tenguseed Co

Ventilation/Exhaust: ACI 4” with controller 69 2 ACI Oscilation fans 2 floor fans You have 4 fans in a 3x3 room? Is that helping take your temp down any? I only have one aci 6in in mine. I just thought they helped circulate the air. I do have a clip-on...
Home Forums Medical Cannabis Cultivation Grow Diaries Schwifty grows under ViparSpectra KS3000 with Multiple Strains from Tenguseed Co
Grow diary eligible · Medical Cannabis Cultivation

Schwifty grows under ViparSpectra KS3000 with Multiple Strains from Tenguseed Co

by SchwiftyGrower · Started
1d
Running
0
Updates
360
Replies
0
Images
Discussion below · 360 replies
Page 3 of 19 · Replies 41–60 of 361
Ventilation/Exhaust:
ACI 4” with controller 69
2 ACI Oscilation fans
2 floor fans

You have 4 fans in a 3x3 room? Is that helping take your temp down any? I only have one aci 6in in mine. I just thought they helped circulate the air. I do have a clip-on fan in my house I could stick in there. Also, why the floor fans? Do you mean two big fans that have to sit on the floor. Just how much fanning should I be doing. 🫤
 
Ventilation/Exhaust:
ACI 4” with controller 69
2 ACI Oscilation fans
2 floor fans

You have 4 fans in a 3x3 room? Is that helping take your temp down any? I only have one aci 6in in mine. I just thought they helped circulate the air. I do have a clip-on fan in my house I could stick in there. Also, why the floor fans? Do you mean two big fans that have to sit on the floor. Just how much fanning should I be doing. 🫤
Floor fans will be in place when they get in their 3 gallon pots. The floor fans will only be in place during Veg and that’s to help move the incoming air from my humidifier once in their final pots.

I don’t really have to fight temps, the hottest it gets here is 98 and with my door closed the room itself doesn’t get any hotter than 88 and in the tent with lights on I don’t get over 82. I only use my floor fans during certain times and they’re on the lowest settings

My fan at the top is running at level 10 to keep air moving up top and I also have another Oscilating fan moving at half speed in the lower canopy.


Currently with my growth schedule I’m in, I only have my exhaust and 2 Oscilating fans running, floor fans are not installed yet. But they’re very small floor fans and the Oscilating are clip ons
 
Everyone’s looking healthy, some further along than others but no signs of issues.

Reveg is still doing her thing for another clone attempt
 

Attachments

  • F6A7C6C1-8C07-46DB-9C62-EF49A9203EEC.jpeg
    F6A7C6C1-8C07-46DB-9C62-EF49A9203EEC.jpeg
    295.9 KB · Views: 14
G33xTGC and PCxMAD are getting close to the height I prefer to top at. Think we are getting close to possibly revealing their sex
 

Attachments

  • 6EBB5F2E-4A73-4520-994E-66813AEE778D.jpeg
    6EBB5F2E-4A73-4520-994E-66813AEE778D.jpeg
    133.2 KB · Views: 15
  • 6BCFCB9F-B61D-48C3-9568-B6B88F99D6A5.jpeg
    6BCFCB9F-B61D-48C3-9568-B6B88F99D6A5.jpeg
    186.8 KB · Views: 13
Very close! You planning to use a net again or let them go?

That’s a damn nice light I’d love to try one of those out in my 4x4
100% net again!! Gonna take my sweet time filling in the net until there isn’t an inch left and flip :)

I had to cut my nets last time so I could full plant hang so I’ve got some new 3 gallon pots and 2 new 3x3 nets.

Still contemplating if I’m going to do another big defoliation when I top, like I did last time.
 

Attachments

  • 375FF661-2FF1-4EFD-9D0B-2E87D798BB03.jpeg
    375FF661-2FF1-4EFD-9D0B-2E87D798BB03.jpeg
    279.3 KB · Views: 15
  • 28337B11-60FA-46FB-8226-9F7892B68819.jpeg
    28337B11-60FA-46FB-8226-9F7892B68819.jpeg
    170.6 KB · Views: 16
  • 4B70349F-B97E-4AD4-8DA8-D4B5E5F1C9B7.jpeg
    4B70349F-B97E-4AD4-8DA8-D4B5E5F1C9B7.jpeg
    294.1 KB · Views: 16
  • A1BA2309-AC93-43BA-9446-6E87241DF6AE.jpeg
    A1BA2309-AC93-43BA-9446-6E87241DF6AE.jpeg
    289 KB · Views: 14
There are many other options to try as well, since you’re limited I’d try as many as possible to gauge success rate on each method
 

Attachments

  • E7569EEC-E806-4341-ABEA-58523172B6CD.jpeg
    E7569EEC-E806-4341-ABEA-58523172B6CD.jpeg
    76.6 KB · Views: 18
Seal the pack very very well after you use it hopefully you can get a few rounds off each pack, it goes a long way, especially if you’re only taking 4-6 clones at a time
 
Hair cut for the 4, working on bushing them out. Something I didn’t do as well last time. Got a shorty bush on the far right hehe
 

Attachments

  • BB8D93F4-E4F4-4612-8FCE-E6F5E68B3A80.jpeg
    BB8D93F4-E4F4-4612-8FCE-E6F5E68B3A80.jpeg
    312.7 KB · Views: 15
  • 3020C5DB-14CE-427E-ABC7-A4017EDE3119.jpeg
    3020C5DB-14CE-427E-ABC7-A4017EDE3119.jpeg
    328.2 KB · Views: 15
Watering day - got them finally on the same watering schedule. Still no nutrients as of yet since these are in 100% OF. I am going to need to start feeding nutrients soon or transplant to larger pots for the PCxMad and G33xTGC.

Only 2 are closing to showing sex so I’m not wanting to go up just yet so I will probably start a slight nutrient feeding next watering.

Plants are absolutely loving @ViparSpectra KS3000. Right now they’re still thriving at 50% intensity at 20 inches away from tallest plant.

Keeping temps steady at 81 and humidity between 68-72%.

Happy growing everyone, check back in soon!
 

Attachments

  • A3499509-DDE4-4900-9CCB-2A3E5776757E.jpeg
    A3499509-DDE4-4900-9CCB-2A3E5776757E.jpeg
    323 KB · Views: 17
  • 02B5AA33-E6F7-470A-AED1-AA9CF233F78D.jpeg
    02B5AA33-E6F7-470A-AED1-AA9CF233F78D.jpeg
    202.9 KB · Views: 17
  • BDE78D99-7979-4416-9D47-346ED5A52D0C.jpeg
    BDE78D99-7979-4416-9D47-346ED5A52D0C.jpeg
    230.3 KB · Views: 16
  • 814C57E8-E470-4B6D-AAF7-C53E7B4BBD83.jpeg
    814C57E8-E470-4B6D-AAF7-C53E7B4BBD83.jpeg
    229.9 KB · Views: 14
  • 4D3A1DBA-951E-4377-B089-1026EDAE5759.jpeg
    4D3A1DBA-951E-4377-B089-1026EDAE5759.jpeg
    343 KB · Views: 15
Watering day - got them finally on the same watering schedule. Still no nutrients as of yet since these are in 100% OF. I am going to need to start feeding nutrients soon or transplant to larger pots for the PCxMad and G33xTGC.

Only 2 are closing to showing sex so I’m not wanting to go up just yet so I will probably start a slight nutrient feeding next watering.

Plants are absolutely loving @ViparSpectra KS3000. Right now they’re still thriving at 50% intensity at 20 inches away from tallest plant.

Keeping temps steady at 81 and humidity between 68-72%.

Happy growing everyone, check back in soon!
Looking good! 😁
 
Page 3 of 19 · Replies 41–60 of 361
Back
Top Bottom