damien50
- Posts
- 420
- Reactions
- 1,049
- Joined
- Jun 26, 2018
- Points
- 143
Wondering if I could run a sealed room with orcafilm, PVC wrapped in insulation foam, and 2 inch Velcro for the seams and openings.
Size of around 8x4x8 with two 3x3 tables. I figured could mount a portable AC 4-5ft high with a dehumidifier next to it draining both into a spare tank outside. 4" fan to scrub the air and second fan connected to a damper to dump excess c02.
I was thinking 6 oscillating fans and PVC plumbing with solenoid drain valve for the flood tables. Not entirely sure how I can run c02, electrical, and plumbing while keeping everything sealed.
Trolx co2 system with #25 tanks and InkBird controllers.
Size of around 8x4x8 with two 3x3 tables. I figured could mount a portable AC 4-5ft high with a dehumidifier next to it draining both into a spare tank outside. 4" fan to scrub the air and second fan connected to a damper to dump excess c02.
I was thinking 6 oscillating fans and PVC plumbing with solenoid drain valve for the flood tables. Not entirely sure how I can run c02, electrical, and plumbing while keeping everything sealed.
Trolx co2 system with #25 tanks and InkBird controllers.
