THCFarmer.com
121,256 Members Log In Register
Log In Register

Simple ph down doser

  • Thread starter Thread starter Innov8tr
  • Start date Start date
  • Tagged users Tagged users None

Simple ph down doser

Innov8tr 37 Replies 12,753 Views
Page 2 of 2 · Replies 21–38 of 38
#21
I upgraded my dosing pump setup. I wanted to make sure the ph down was mixed as much as possible the farthest away from the plants. I added a "t" at the back manifold and a john guest fitting. This attaches the dosing pump tubing directly to the returning water to the epi.
 

Attachments

  • 165.JPG
    165.JPG
    133.3 KB · Views: 238
  • 166.JPG
    166.JPG
    117.7 KB · Views: 239
#22
I set these up for my clone machine and veg system. They draw from one ph down bottle and each has its own dosing pump. I had to dilute the ph down by 50% so that my clone machine didn't swing to much when it was added since it was such a small body of water.

I also found out that dosing pumps from bulkreefsupply.com dose even slower than the ones from aquamedic and I think make a better dosing pump to use for our applications.
 

Attachments

  • 195.jpg
    195.jpg
    217.7 KB · Views: 250
#23
I like the injector.


Note on BRS, they are almost ALWAYS backordered, so if you see pumps in stock, snag them. I waited nearly 2 months for one before I just cancelled the order.
 
#24
Man, that is a really nice setup. I'm really glad I came across this thread. You sure do know what your doing. Thanks for all the info and pictures. Really helps me out a ton. I'll be sure to post some pictures of my new setup. It will have one of these doser units.

I've still got one more question. The Milwuakee sm-122 controller. Will it let me run two pumps off it? I want to have a PH Up and Down pump. If I miss something, I'm sorry. Been a long day and didn't see it after going over.

I've looked for a good picture and I can't tell if there is two outlets or not.
Thanks again,
BG
 
#25
Billygoat said:
Man, that is a really nice setup. I'm really glad I came across this thread. You sure do know what your doing. Thanks for all the info and pictures. Really helps me out a ton. I'll be sure to post some pictures of my new setup. It will have one of these doser units.

I've still got one more question. The Milwuakee sm-122 controller. Will it let me run two pumps off it? I want to have a PH Up and Down pump. If I miss something, I'm sorry. Been a long day and didn't see it after going over.

I've looked for a good picture and I can't tell if there is two outlets or not.
Thanks again,
BG
Click to expand...

There is only one outlet, but no reason why you couldn't put a 'cube' on it to increase the outlets.
 
#26
Billygoat said:
Man, that is a really nice setup. I'm really glad I came across this thread. You sure do know what your doing. Thanks for all the info and pictures. Really helps me out a ton. I'll be sure to post some pictures of my new setup. It will have one of these doser units.

I've still got one more question. The Milwuakee sm-122 controller. Will it let me run two pumps off it? I want to have a PH Up and Down pump. If I miss something, I'm sorry. Been a long day and didn't see it after going over.

I've looked for a good picture and I can't tell if there is two outlets or not.
Thanks again,
BG
Click to expand...

Billgoat the sm-122 out of the box is not able to do that, it can only control ph down. IME 90% of the time you really only need ph down for the UC on a constant basis. I just hand dose ph up in the system when I need to, but that isn't very often. I considered trying to setup a sm-122 on a flip flop relay to make it control ph up but it just isn't worth it as little as I need it. IMO its actually good to notice a swing down in ph, typically that isn't a good sign unless you are at the end of the harvest. If you had a ph up doser you may not know there is a problem.
 
#27
Innov8tr said:
Billgoat the sm-122 out of the box is not able to do that, it can only control ph down. IME 90% of the time you really only need ph down for the UC on a constant basis. I just hand dose ph up in the system when I need to, but that isn't very often. I considered trying to setup a sm-122 on a flip flop relay to make it control ph up but it just isn't worth it as little as I need it. IMO its actually good to notice a swing down in ph, typically that isn't a good sign unless you are at the end of the harvest. If you had a ph up doser you may not know there is a problem.
Click to expand...

Thanks, and your totally right. I'll set it up like you did. I just wanted to add an up for when I leave for a bit, but your totally right. Man, this setup and going to save some money and make life easier for me.

I'll be sure to post some pictures of my new bucket system. Thanks again for posting this thread. Cool setup.
Thanks,
BG
 
#29
Hey brother... nice job. Had a question... what is that mini cooling coil that you are using?
 
#31
Awesome info here.. Does that Milwaukee unit connect directly to the doser pump?
 
#33
Innov8tr, just wanted to touch base with you. Going to be setting up two units and want to make sure they are done right. I'm going to be mounting the meter and pump to a small piece of plywood. Then I'll mount it to the wall.

My question is this. Do I need to have the bottle or container with the PH down, below the pump or above the pump? I don't want any type of syphon to happen.

I'll be using one of the units for a 55 gallon setup and about for a 18 gallon setup. I went with the BRS 2 Part Doser (1.1 mL Per Minute). I think these units should work nicely.

Let me know what you think. Don't need to over do the ph down with a syphon issue.
Thanks,
BG


EDIT: Never mind. For some reason I missed the info on the unit and that it "Will not back siphon" Thanks
 
#34
Innov8tr said:
I upgraded my dosing pump setup. I wanted to make sure the ph down was mixed as much as possible the farthest away from the plants. I added a "t" at the back manifold and a john guest fitting. This attaches the dosing pump tubing directly to the returning water to the epi.
Click to expand...


I like this method of actually tieing the doser into the suction line so it's all mixed well prior to hitting the sites. Quick question, what keeps the suction from continuing to pull in the ph down? Does the dosing pump pinch the line enough to stop suction from the curculation pump from draining the bottle into the suction line?
 
#35
Do any of you use a complet dosing system I have the grobot from purgrow not using it yet not to familiar with doseing
 
#36
Innov8tr said:
I upgraded my dosing pump setup. I wanted to make sure the ph down was mixed as much as possible the farthest away from the plants. I added a "t" at the back manifold and a john guest fitting. This attaches the dosing pump tubing directly to the returning water to the epi.
Click to expand...

Where you get 1/2 male NPT x 1/4 tube from? cant find it anywhere
 
#37
canaguy27 said:
you should switch to food grade phosphoric acid and you will never buy a bottle of ph down again. an ounce of that stuff took 5 gallons of 8ph down to 2.5ph.
Click to expand...

Phosphoric acid is probably a bit overkill for this purpose--some pretty dangerous stuff there. Very ouchy if spilled, and very very hard to get off (not nearly as easy as most other acids bases--this stuff is sticky).
 
Page 2 of 2 · Replies 21–38 of 38
Back
Top Bottom