Home made cloner would work great for 6 plants I do 20 in a Turbo cloner 94 site. Tangeled roots galore growing into the pump..LOL ..A cycle timer is key no chiller needed...:)Very nice arrangement Jack! What would be your suggestion for the most economical system to veg 6 plants under T5's, that would ultimately be large enough to transfer straight into my UC System 6 with 5" net pots? :wondering
I ask because my flower room is perpetual and I cannot veg in the UC6 for future rounds... I also cannot afford to setup a separate UC in my veg station. I was thinking of 6 small DWC buckets or maybe some sort of large cloner that could keep the roots from tangling between the 6 plants... :thinking
Hello Jack,
I noticed you are using a large mag pump, do you find the larger pumps work better in the under current system? I hear alot of people concerned about roots working there way down the pipes if the flow is too much. What is your thoughts?
Thanks Tony
Home made cloner would work great for 6 plants I do 20 in a Turbo cloner 94 site. Tangeled roots galore growing into the pump..LOL ..A cycle timer is key no chiller needed...:)
Better not really.. Its what I had laying around its a 1200 mag drive pump If your plants are healthy the roots will grow down the pipes regardless of pump size..JACK
Parts list.. LOL.. A trip to home Depot and a Call to Daniel at UC..First off I would like to say your work is amazing! Second I was wondering if you had a parts list for your method of building your Uc system. Anything would be great. I plan to do a 12 plant system. Thanks again.
One end has the epicenter the oppisite has a 3"90 degree bend coming off the last bucket with a 2' long pipe facing straight up and then capped. I will snap a pic JACKCurious about how you did the manifold ends? 3" PVC to reducer?
Still using an epicenter?
Still using an epicenter?
Can to snap a pic if you get a chance?
Sprayers are cheap if they clog replace them its like $10 for 100. Moms are at 500PPM,:)Thanks for the timer tip on the cloner. @24/7 the temps get over 80 deg in mine. When ever i have roots in the cloner like that I end up with a mess and my sprayer get roots in them. How do you prevent clogged strayers? How strong is your nutes in the UC system? Thanks
T 5 Bad Boy :)looks good jack, what are you lighting it with? Looks like flo's to me..
Curious about how you did the manifold ends? 3" PVC to reducer?
Still using an epicenter?
Can to snap a pic if you get a chance?
"I treat all my moms the same they are given Advance Sensi A+B with Magical and Roots Excel. I do nute ,nute,flush,flush,etc. All of the roots where taken from the same mom at the same time.JACK"
ok i found this. I'm planning on doing a DIY single bucket system solely for to grow clones. was thinking if i should put 1 or 2 plants in there should i change my rez every week? thanks
also moms at 500ppms
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?