So far, I'm leaning toward the T6 and getting the WiFi controller. I still want to read through the product information.
We're about to have the hottest weather so far this summer. So I made some changes based on what I've learned in this thread. Until I get a better fan, here's what I've done.
I made two exhaust fan assemblies with 200 CFM fans to fit into the tent's ports:
View attachment 1265245
Here's what the fans look like when they're installed in the top of the tent:
View attachment 1265246
I opened the flaps at the bottom of the tent that have fabric mesh to keep crud out of the tent:
View attachment 1265244
So far, these fans seem to be working well. The power supplies are running hot because the fans are drawing too much power. The fans are 1.5 Amp and the power supplies are rated at 0.5 Amp. I'm surprised neither of them has died. I ordered a 5.0 Amp power supply that will have more than enough power for both fans. It's due to arrive tomorrow. I plan to repurpose the smaller power supplies to add fans to the heat sinks on the light panels.
Meanwhile, the outside temperature is supposed to reach the high 80s today. I'm blowing cool outside air through the room. The room temperature was about 75* at noon but it will get hotter. Inside the tent, it's 83* with a RH of 54%.
So far, the plants seem fine, even though they've been through hell because of the newbie grower.
View attachment 1265250