amneziaHaze said:

could be.i know you can get a pattern when you 3d print if you use a bumpi floor you get rainbowcolors soo maybe similar happened here

at least now when i break a peace it explodes but stays in the glass this one is a lot deeper. hope one day to have a full glass

Click to expand...

What temps do you press at?

i dont know had to google last time but i think it was 97C or 101 the press remembers

amneziaHaze said:

i dont know had to google last time but i think it was 97C or 101 the press remembers

Click to expand...

I think your temps are why you're getting the glass instead of butter. 81-87c and a slow press over 3-5 minutes should get that consistency you were asking about a while back.

GasPlease said:

I think your temps are why you're getting the glass instead of butter. 81-87c and a slow press over 3-5 minutes should get that consistency you were asking about a while back.

Click to expand...

i warm it up for 1min then just press it. does it really make a difference if you press for 5min?

amneziaHaze said:

i warm it up for 1min then just press it. does it really make a difference if you press for 5min?

Click to expand...

It's not really about an amount of time. You want to be gradually increasing pressure over time. Usually lasting 3-5 minutes. If you just smash it then you are also forcing lipids,fats,waxes, and chlorophyll out of the material and into your rosin.

GasPlease said:

It's not really about an amount of time. You want to be gradually increasing pressure over time. Usually lasting 3-5 minutes. If you just smash it then you are also forcing lipids,fats,waxes, and chlorophyll out of the material and into your rosin.

Click to expand...

i dont see the logic there.if anything longer time would make hot all of that and give more of that in the final rosin.maybe thats why its butter.both cases plant matter is under 7tonnes. and its not like i am pressing a button and bam, i am still pulling the lever it takes me maybe 30sec to reach the max from the pump

amneziaHaze said:

i dont see the logic there.if anything longer time would make hot all of that and give more of that in the final rosin.maybe thats why its butter.both cases plant matter is under 7tonnes. and its not like i am pressing a button and bam, i am still pulling the lever it takes me maybe 30sec to reach the max from the pump

Click to expand...

It's not my logic. It's what I was told by others that produce extracts as a profession. I guess keep doing it the same way and hoping the results change.

GasPlease said:

It's not my logic. It's what I was told by others that produce extracts as a profession. I guess keep doing it the same way and hoping the results change.

Click to expand...

been watching now some youtubers and reading some articles they are doing it my way or i am doing it their way nobody is doing a 5min press
only thing i still havent tried is those bags.
but since last time when i raised the humidity i got a huge boost. i need to messure next time how much i get soo i know where i stand.

and they all say 600 -1000 psi mine goes to 6000 and i have been doing it to the max every time maybe that is making problems....
there was a formula how much real pressure your doing depending on the plate size but i cant find it now

amneziaHaze said:

been watching now some youtubers and reading some articles they are doing it my way or i am doing it their way nobody is doing a 5min press
only thing i still havent tried is those bags.
but since last time when i raised the humidity i got a huge boost. i need to messure next time how much i get soo i know where i stand.

and they all say 600 -1000 psi mine goes to 6000 and i have been doing it to the max every time maybe that is making problems....
there was a formula how much real pressure your doing depending on the plate size but i cant find it now
View attachment 2583595

Click to expand...

Why do you keep going back to the extreme? 5 minutes would be for a larger amount of material or a "low and slow" with lower temps.

Ive been told buds at 62ish rh% perform better. I think you're right about the pressure. This is where the time comes from. For example increasing pressure to 500 and letting it work for 30-60 seconds. Then increase to 750 for 30-60 and then finish at 1000 for 30-60 seconds. Isn't the formula for the surface area of the material not the plates?

Cman top looks done bottom the light did make a difference but not really maybe better placement and longer hours next time.
The insects are starting to take everything down there is soo much dead leafs i dont think they will survive another week.

Top blue is cman botton clean is white goerila haze
21.9: put in wet paper
3.10: right 10L with 4g silica +10L+10L+ little bit of tnc myco hydro +10L+10L+10
Bucket full
Left: 10L+4g silica + 10L +10L+tnc hydro+10L+10L+10L full
Current ppm left 16 right 20


( i didnt count 10L ,bucket should be around 10L)

6.10
Cman 285 6.1
White 324 6.0
23k
Added some ph- but it will take grams and 6 doesnt bother me now
Cman looks little bit weird but the root did show finally

8.10
Cman289 6.4
White327 6.4
Added 2.5g of ph- annnnd i fprgot it was ro water ph is 4.9 soo added some calcium carbonat 0.14g lets wait 30 min...
F it 20~ L out for cman and 10 for white
Still 5.0 okej some baking soda.... letting it go until tommorow
9.10
Left 6.2 right 6.4 sooo back to square one
Cman 273 6-6.1
White 307 6.1
Recalibrated pen those are the new numbers.
I did notice there was an explosion of growth whites leaf grew almost a cm overnight.
11.10
10.q0
Cman 268
White 304
Gave cman 0.6gmix

12.10
Cman 278 6.5
White 291 6.4
Cman and white got 0.2g of ph-

13.10
C-man
Ppm 388 i guess it was miss calvulated
Ph 6,4

White Gorilla
Ppm 312
Ph 6,3
1g ph- each


C-man
Ppm 285
Ph 5,1

White Gorilla
Ppm 310
Ph 5,3

Crazy how 0.2 didnt do shit but 1 made it crash out....
14.10
C man
Ppm 288
Ph 6,1

White Gorilla
Ppm 313
Ph 5,9
We just needed time and not panic (shame)


C man
Ppm 284
Ph 5,7

White Gorilla
Ppm 314
Ph 5,7
Okej same day but at night and maybe we have a problem with the pen....
15.10
C man
Ppm 285
Ph 5,8

White Gorilla
Ppm 300
Ph 5,7
Looks like we have some mg def
Added to both 1.06g mix with double mg


C man
Ppm 331
Ph 5,7

White Gorilla
Ppm 353
Ph 5,6
16.10
C man
Ppm 334
Ph 5,8

White Gorilla
Ppm 349
Ph 5,5
20.10
C man
Ppm 308
Ph 6,1

White Gorilla
Ppm 325
2g 1.5g 2g.
ph 5,6
21.10

Cman 430 5.9
White 483 5.7

22.10
C man
Ppm 393
Ph 5,9

White Gorilla
Ppm 399
Ph 5,6

23.10
C man
383, 5,8
White Gorilla
388, 5,4

24.10
Cman 368 5.7
White 351 5.4
2.5 1.5 2.5 added
25.10
Cman. 512 5.8
White 558 5.1
White 0.3g kalcium carbonat
26.10
Cman 464 5.8
White 422 5.7
27.10
Cman 443 5.8
White 358 5.8

Cman 2.5 1.5 2.5
White 5 3 5 1LRo
28.10
Cman 540 5,8
White 588 5,7
29.10
Cman
528, 5,7
White
560, 5,6
30.10
Cman 487 5.8
White 518 5.7
Both 10L ro 5.3 2.65 5.3 teaspoon bactorr

31.10
Cman 593 5.5
White 634 5.5
Added 10L ro with 10-15g silica feom ta aquatic split with both used some ph- to get it to 6.3
1.11
Cman 510 6.0
White 558 6.2
2.5 1.5 2.5

2.11
Cman 617 5.85
White 708 6.1
63k -> 61k
3.11
C man
569, 6,0
White
624, 6,2
4 2 4 both
68k
Cman 815 5.6
White 963 5.8
59k
4.11
C man
712, 6,0
White
784, 6,1
4 2.5 4
5.11
Cman
828, 5,9
White
925, 5,9

6.11
C man
752, 5,9
White
862, 5,9
Light
before 71
after 60
7 4 7

7.11
Cman
1130
5,8

White
1000
5,8

Light
66
60
8.11
Cman 955 5.8
White 1100 5.8

9.11
Cman 5.9 974
White 1100 5.9
10.11
Cman 936 6.0
White 1120 5.9
Added 5L ro to white 0.5g mgso4
11.11
Cman 882 6.0
White 932 6.0

12.11
Cman 861 6.1
White 924 6.0
3 3 3

13.11
Cman955 6.0

White 1030 5.0
Low on water o.o
10L Ro 8 8 8 white
10L ro 8.5 8.5 8.5 cman
10L Ro both
14.11
Cman 5.9 947
White 1020 5.8
15.11
Cman 5.9 945
White 1010 5.7

16.11
Cman 963 6.0
White 1010 5.9
90k
17.11
C man
957, 6,1
White
1020, 5,9
Light
88
18.11
Cman
915, 6,1
White
1010, 6,0
Light
91
2g cman 1g white
19.11
Cman
969, 6,2
White
1050, 6,0
Light
103300
20.11
Cman
975 ppm,
6,2 ph

White
1070 ppm
6,0 ph
21.11
Cman 985 6.2
White 1090 6.0
1L tap water white

22.11
Cman 6.3 977
White 1050 6.0
5L ro +1L tap split between cman and white
1 2 1g added to the mix(400ppm)
0.3g ph-
23.11
Cman 6.3 922
White 1040 6.1
7 7 7 both
20L ro both
24.11
Cman 810 6.2
White 948 5.9
Cman 0.4g ph-
White 0.3g ph-

25.11
Cman 855 6.2
White 1000 5.8
Cman 0.5g ph-
26.11
Cman 863 6.1
White 995 5.8
3L ro and 0.5g ph- cman
27.11

Cman 6.1 806
White 1000 5.8
0.733g ph- 1L Ro cman
28.11
C man
820, 5,9
White
1020, 5,8

29.11
Cman 5.7 818
White 1030 5.8
10L ro 1 2 1 for white(5.8 324)
30.11
Cman 840 5.3
White 946 5.8
1.12
Cman 4.7 833
White 962 5.8
Cman 10L ro 5.3 5.3 5.3 0.25 k2co3
10L ro + 10Lro 3.2 3.2 3.2 0.12g k2co3
2.12
Cman 726 5.6
White 969 5.9
1.5 1.5 1.5g to cman 0.15g k2co3
3.12
Cman 766 5.8
White 973 5.9
4.12
Cman764 5.8
White995 5.9
5l ro for white and 0.051g ph-
5.12
Cman 5.9 770
White 922 5.9

6.12
Cman 5.9 782
White 922 5.9
8.12
Cman 819 5.5
White 958 5.9
5L ro to each
9.12
Cman
744, 4,8
White
870, 5,7
Cman ph up 0.3g 2L ro

10.12
Cman 804 5.7
White 904 5.9
New bottom lighting 8h
New uv 2h
11.12
Cman 824 4.2
White 5.9 827
3.1 5.1 3.1 cman(830) 10L Ro
4 2 4 cman 10L Ro 0.5g ph+

12.12
Cman 5.6 777
White 926 5.9
0.2 ph + cman

13.12
Cman 5.8 783
White 957 5.9
14.12
Cman 803 5.9
White 976 5.9
Uv 4h
15.12
Cman 5.9 838
White 1000 5.9
3L ro each
16.12
Cman 793 5.9
White 959 5.9
17.12
Cman 852 5.2
White 969 5.7
2L ro 0.53g 0.265 0.53 (489 6.5) 0.2g ph+)
For both
18.12
Cman 850 5.4
White1000 5.6
2L ro 0.53g 0.265 0.53 (489 6.5) 0.2g ph+)
For both

20.12
Cman 926 4.4
White 1030 5.8
Cman out 10L in 25L 10.6g 5.3 10.6
10L 5.3 2.65 5.3
21.12
Cman 850 5.7
White 1080 5.7

22.12
Cman 850 5.6
White 5.5 1170

10L out 30L ro 15.9 1/2 15.9 0.6ph+ white
Small teaspoon of tnc hydro for white
White 984 5.8
Teaspoon of tnc hydro to cman
10L ro for white

23.12
Cman 830 5.7
White 827 5.8
24.12
Cman 882 5.7
White 858 5.7
10L ro each
25.12
Cman 737 5.8
White 732 5 7
26.12
Cman 5.8 755
white 732 5.8
27.12
Cman 780 5.9
White 730 5.9
28.12
Cman 772 5.9
White 737 5.9
29.12
Cman 783 5.9
White 735 5.9
30.12
Cman 6.0 787
White 728 5.9
31.12
Cman 813 5.9
White 742 5.9
1.1.2026
Cman 5.9 830
White 748 5.9

Put the top buds in the fridge and lowers in the tent.there is probably over 200g of it in the fridge and hopefully 200 more in the tent.
Not the best yield in my opinion(still didnt weigh it)
We did get mold on cman but only 2 buds that i could find and they where both from the middle part where it was full
Second white was total shit it had one top bud and rest of the plant was just few leaves with the idea of pistils soo she was a fail.

I love this net more and more easy to remove from it easy to use it for drying great support for the plant most branches couldnt hold themselfe

Oct 27 start of flower.
Wanted to add white looked like it could flower longer and bottoms where really young compared to the tops

Volume change is crazy bottom 2 are cman top is white with a few branches from cman
We are at 72% soo a few more days and then real drying / curing starts

What are the dimensions of the inside of your weed dryer?

Greenadian said:

What are the dimensions of the inside of your weed dryer?

Click to expand...

around 32x46x36cm

amneziaHaze said:

Oct 27 start of flower.
Wanted to add white looked like it could flower longer and bottoms where really young compared to the tops

Click to expand...

My scissors like just like that

Small ones are dry and ready I still haven't checked the bigger ones. The fridge is progressing nice as well, currently at 72.2% when door is open drops to 64.

Cman104+white81
185 from everything belove the net

Lots of leafs I have no desire to trim that soo in to the freezer until I decide to press

Fridge at 15c and 70%

FRIDGE IS AT 64% we got a few more days of drying and finally done :D