Time to help the good folk

  • Thread starter Tasty Buds
  • Start date
  • Tagged users None
Tasty Buds

Tasty Buds

A organic one which is more of a booster and is gone by harvest as run only at first two weeks as it's a two part called budzilla 🦖 u can't get PGRS like the old first lot now and alot of growers use it at end for weight and rock had buds but they lose the resin as it grows then makes resin that's the difference you know if they have used it as makes buds go brown and no one will take it plus for medical it has to be all scan first and what's in it it's all change from back
Ghost,
Would you mind going through your feeding schedule from clone through veg?
Pa is one of those not too regulated states. I'm curious if they're going to hold cannabis to a higher standard than fruits, and veggies as I believe every other state does.
Do any states hold their medical cannabis to different standards than the recreational?
It's pretty rediculous, as alcohol IS poison.
Imids are used up until the day of harvest with graped.
Well, that may have changed, but I doubt it
That's a killer yield!
14 zips each would leave me at around 4 lbs a light the way I do it on a commercial scale.
I aim for 1/4 lb + a table.
10 plants a table/light (the weakest gets tossed). I train for 4 main colas per plant.
Ill get an oz + per cola, leaving me with 36 oz per table.
I'll accept 32. Anything less on a grow with no issues, and I'll dump the strain.
Your harvest pics was even more impressive than the grow pick.
Was that strain given to you as a clone, or was it on a pheno hunt?
Yes, I'm replying to myself, as I made an error. I aim for 1/4 lb of cola bud per plant, NOT per light.
9 plants, 4 colas per plant, and I'll accept 32 oz per table, but if everything is uniform, as it should be, 36 oz per light is good.
Some strains will do much better, but like I said, if I can't hit 2lbs, or 32 oz per light/table, the strain sleeps with the fish.
 
Ghosttrainx

Ghosttrainx

Dude, an easy trim is worth a 1/4 lb of bud per per light for me.
I absolutely love almost everything about growing.
Trimming SUCKS!
Cloning large #'s sucks.Clean up sucks, unless Rockwool was my medium. Then it's just work
The tops are good to trim it sucks but it is enjoyable looking at The end product it mainly the small stuff that's drives u crazy but I let dry the small stuff and as I sweat it out open and closing garbo bag I can crumb most of it off in bag and use my fingers removing it off or stick in trim bowl 😎🥳🤯👻🚂
 
Ghosttrainx

Ghosttrainx

Ghost,
Would you mind going through your feeding schedule from clone through veg?
Pa is one of those not too regulated states. I'm curious if they're going to hold cannabis to a higher standard than fruits, and veggies as I believe every other state does.
Do any states hold their medical cannabis to different standards than the recreational?
It's pretty rediculous, as alcohol IS poison.
Imids are used up until the day of harvest with graped.
Well, that may have changed, but I doubt it
Yes, I'm replying to myself, as I made an error. I aim for 1/4 lb of cola bud per plant, NOT per light.
9 plants, 4 colas per plant, and I'll accept 32 oz per table, but if everything is uniform, as it should be, 36 oz per light is good.
Some strains will do much better, but like I said, if I can't hit 2lbs, or 32 oz per light/table, the strain sleeps with the fish.
Do 8 colas bro 🤜🤛👻🚂
 
Ghosttrainx

Ghosttrainx

Ghost,
Would you mind going through your feeding schedule from clone through veg?
Pa is one of those not too regulated states. I'm curious if they're going to hold cannabis to a higher standard than fruits, and veggies as I believe every other state does.
Do any states hold their medical cannabis to different standards than the recreational?
It's pretty rediculous, as alcohol IS poison.
Imids are used up until the day of harvest with graped.
Well, that may have changed, but I doubt it
Yes, I'm replying to myself, as I made an error. I aim for 1/4 lb of cola bud per plant, NOT per light.
9 plants, 4 colas per plant, and I'll accept 32 oz per table, but if everything is uniform, as it should be, 36 oz per light is good.
Some strains will do much better, but like I said, if I can't hit 2lbs, or 32 oz per light/table, the strain sleeps with the fish.
Ok once clones are in pots I hand water them for first week to keep pad wet and medium I feed nutes which is about 1.2 ec at 5.3 ph so in 200 litre drum I add 200 mls of RHIZO 100mls fulvic 200 mls cal mag 200 mls of A And B and 150 mls of food grade sanitizer till they can take 400mls of A And B I run 3 weeks with the sanitizer to kill every thing in plant and medium and add a little trace elements as well as my water is filtered as I grow for 8 weeks the 3rd week I will cut clone size from centre and clean up inside week five I will tip the plant and clean again inside and do the same a week later and no more and maybe knuckle as well by kinking stems when I clean them if your going to touch them do it all at once and not here and there at week 5 they are established and grows back hard and fast and after 3 week rise ph 5.5 as well 👻🚂💯
 
Tasty Buds

Tasty Buds

Ok once clones are in pots I hand water them for first week to keep pad wet and medium I feed nutes which is about 1.2 ec at 5.3 ph so in 200 litre drum I add 200 mls of RHIZO 100mls fulvic 200 mls cal mag 200 mls of A And B and 150 mls of food grade sanitizer till they can take 400mls of A And B I run 3 weeks with the sanitizer to kill every thing in plant and medium and add a little trace elements as well as my water is filtered as I grow for 8 weeks the 3rd week I will cut clone size from centre and clean up inside week five I will tip the plant and clean again inside and do the same a week later and no more and maybe knuckle as well by kinking stems when I clean them if your going to touch them do it all at once and not here and there at week 5 they are established and grows back hard and fast and after 3 week rise ph 5.5 as well 👻🚂💯
Thanks!
I wanted to ask. Is your ph coming out rising? Sometimes dropping is an indicator of big problems, but other times it could be from feeding at a high ec. Ime anyway
 
Ghosttrainx

Ghosttrainx

Thanks!
I wanted to ask. Is your ph coming out rising? Sometimes dropping is an indicator of big problems, but other times it could be from feeding at a high ec. Ime anyway
Sure does comes out higher all ways does I don't check ph run off only if I am trying to work probs out 5.3 will come out 5.5
 
Dr.Green55

Dr.Green55

@Ghosttrainx , I took a quick look back through the thread but didn't see it, sorry if you mentioned it, but are you running drain to waste or recirculating, what medium and size container Thanks just curious.
 
Ghosttrainx

Ghosttrainx

PhOverhang ńwith 200 litre and 2 feeds a day at 30 seconds each time as it takes a couple days the ph will rise up so it will go through all ph valves
@Ghosttrainx , I took a quick look back through the thread but didn't see it, sorry if you mentioned it, but are you running drain to waste or recirculating, what medium and size container Thanks just curious.
Run to waste in coco 30 per perlite and clay balls at the bottom 3 inches and in 50 litre pots👻🚂🤜🤛
 
Ghosttrainx

Ghosttrainx

That's how you do your ph put in couple lower comes out higher and 7.0 is neutral so at first stage they want iron that's why they go and yellow as they set in and grow they want all the lower trace elements to start with then the the N and sorry I forgot I use Nitro boost as well on feed chart using 100mls then to 200mls when bigger ok as the trace elements are needed to process the N 👻🚂🤜🤛
 
Moshmen

Moshmen

Mosh, glad you've joined in..I know that name..Are you a breeder, or do you own dispensaries in Denver? That name is super familiar.
No matter welcome
Nope just an average dude down south growin my own meds - learning as much as I can here to transfer into my small garden - I shoot for variety and quality not quantity ! Lol but still lots to pick up on here
 
Dr.Green55

Dr.Green55

PhOverhang ńwith 200 litre and 2 feeds a day at 30 seconds each time as it takes a couple days the ph will rise up so it will go through all ph valves

Run to waste in coco 30 per perlite and clay balls at the bottom 3 inches and in 50 litre pots👻🚂🤜🤛
That nice setup but a lot of coco lol you must reuse it ? that would get very pricey up here. I'm in Sunshine and doing well with it but kinda bored with it and sick of lugging it around and the mess so I think I'm going to go back to coco or try the uni-slab. I have a auto feed system so either one would be easy to switch over to.
Your grows are very nice looking
 
Last edited:
Ghosttrainx

Ghosttrainx

That nice setup but a lot of coco lol you must reuse it ? that would get very pricey up here. I'm in Sunshine and doing well with it but kinda bored with it and sick of lugging it around and the mess so I think I'm going to go back to coco or try the uni-slab. I have a auto feed system so either one would be easy to switch over to.
Your grows are very nice looking
25 to 30 dollars a bag here aus coco blocks are not good I say that's in little bricks👻🚂
 
Rootbound

Rootbound

Supporter
Nope just an average dude down south growin my own meds - learning as much as I can here to transfer into my small garden - I shoot for variety and quality not quantity ! Lol but still lots to pick up on here
Very nice Mosh! Same here, just grow our own meds for me and the wife. Quality is number one priority, yield is the last thing people should focus on imo.
 
Moshmen

Moshmen

Very nice Mosh! Same here, just grow our own meds for me and the wife. Quality is number one priority, yield is the last thing people should focus on imo.
Thanx , Yield = cash for commercial growers I get it, everyone needs to make a living. I’m a small business owner myself - however even in our business we sell quality. Lol quality materials and quality craftsmanship. So yeah quality # 1 all the way someday I’ll get there! Lol
 
iX_Lazy_Xi

iX_Lazy_Xi

Thanx , Yield = cash for commercial growers I get it, everyone needs to make a living. I’m a small business owner myself - however even in our business we sell quality. Lol quality materials and quality craftsmanship. So yeah quality # 1 all the way someday I’ll get there! Lol
I'll take 3.5 of 🔥 over a lb. of 🗑 any day
 
Top Bottom