I started running cutting edge solutions 3 part some time back and what i found was that everything that is in
Calmag is already in the micro portion of the 3 part. I don't think you should use
calmag unless you are running a 2 part base. I was doing just that in the beginning, and when I stopped, so did my problems. I also use carbo load(AN), budswel, green planet's massive and finisher, silica, and
hygrozyme. Anyway if your using flora micro, do a side by side label check and you might find you're double dosing.
MICRO INGREDIENTS:
Basic
Applications
Table
otal Nitrogen (N) 5.0 %
0.3% Ammoniacal Nitrogen
4.7% Nitrate Nitrogen
Soluble Potash (K2O) 1.0 %
Calcium (Ca) 5.0 %
Cobalt (Co) 0.0005 %
Soluble Iron (Fe) 0.1 %
0.1% Chelated Iron (Fe)
Manganese (Mn) 0.05 %
0.05% Chelated Manganese (Mn)
Molybdenum (Mo) 0.0008 %
Derived from: Ammonium Molybdate, Calcium Nitrate, Cobalt Nitrate,
Copper Nitrate, Potassium Nitrate, Zinc Nitrate, Potassium Borate,
Potassium Sulfate, Calcium Carbonate, Manganese EDTA, Iron EDDHA
and Iron DPTA.
Information regarding the contents and levels of metals in this product is
available on the internet at
http://www.aapfco.org/metals.htm F-1109
elements plus special pH buffers.
•
FloraMicro is the foundation of the "Advanced Nutrient
System."
FloraGro and
FloraBloom form the structure.
Combine
FloraMicro,
FloraGro and/or
FloraBloom in
different ratios to create specialized nutrient mixes. We
call this the "building-block" method. This unique system
gives growers greater control over the nutrient mix than
a single-part nutrient.
• An aggressive nutrient can be mixed for fast growing
plants with a high metabolic rate, or a mild nutrient can
be mixed for delicate or slow growing plants.
• Adjust the nutrient mix to meet specialized needs for
each phase in the plant's life cycle: seedling, vegetative,
transitional, flowering and fruiting.
• Refer to the Basic Applications Table for mixing
recommendations. Please measure accurately. Reduce
nutrient strength if plants show signs of stress, or if
growing in very bright, hot or dry environments.
Shake well before mixing. Always add
FloraMicro to
fresh water first and stir well, then add
FloraGro and/or
FloraBloom. Never combine
FloraMicro with
FloraGro or
FloraBloom in undiluted form; doing so may cause
nutrient lockout making some minerals unavailable.
This product is concentrated to the limit of solubility. Protect from freezing and
direct sunlight. If crystallization occurs, mix entire contents with an equal
amount of hot water and double the amount used.
Keep out of reach of children.
CALMAG: