Try number four. Let's go

[amneziaHaze]

When I upped to full dose still mostly green. Some yellow leaves starting from bottom. One plant darkWasy

Rafiki the monkey is pretty dope. I bet that fool could grow green plants.
I tried cloning. Windowsill method. They grew some little nubs but died before they grew any. Water got slimy. Leaves started dieing. I'm going to attempt to make a bucket cloner. I have the nozzles bucket. I need 1/2 inch hose t stem adapter and water pump. Less than 20 worth of supplies and I can attempt to make one.

and before full dose how much did you use and how often?

 

[Dadman86]

I’ve three different things I would be looking at. It’s only speculation though. If it were my plant I’d water with cal-mag

Another thought ( if it’s locked out you do t really want to be throwing a bunch of stuff at it) but I’d be looking at upping the plants bloom. And bumping the N a bit. Again this is just what I would do and Im not suggesting you do this. Just some food for thought, get the wheels turning on something you know? : ) I defer to the elders here though : )

Bear bro I'm on the calmag. Been giving full dose since I started feeding. The plan was to keep em nuted up so they didn't turn ugly. I'm hoping it's not lock out. I dont my

and before full dose how much did you use and how often?

Threw early veg 1/2 dose every other feeding.
I can't say for sure when I started 3/4 dose. I need to write down what and when I did shit.
But I went by plant size as they got bigger upped nutes.

 

[Dadman86]

Bear bro I'm on the calmag. Been giving full dose since I started feeding. The plan was to keep em nuted up so they didn't turn ugly. I'm hoping it's not lock out. I dont my

Threw early veg 1/2 dose every other feeding.
I can't say for sure when I started 3/4 dose. I need to write down what and when I did shit.
But I went by plant size as they got bigger upped nutes.

And I don't pH I use city water. Peat perlite mix for medium.

 

[amneziaHaze]

i guess if the ph was a problem you would have it from day one since your using all the same stuff now....

are you using organic nutes or synthetic.if its organic it will take a few days to kick in if its synthetic should have stopped growing in the few days you started it.double dose is a huge jump.
you tried to do some foilar sprays?

 

[Dadman86]

i guess if the ph was a problem you would have it from day one since your using all the same stuff now....

are you using organic nutes or synthetic.if its organic it will take a few days to kick in if its synthetic should have stopped growing in the few days you started it.double dose is a huge jump.
you tried to do some foilar sprays?

I just started city water. last run was bottle RO water only plants still turned yellow. I use advanced nutrients micro grow bloom. General hydroponics calmag. I bought this brand because they claimed to be pH perfect. No need to adjust. 2 grows and either this shit is garbage or my inexperienced feeding game
Is lacking. I'm thinking of trying something new. I'm using it on my current veg plants. If I can't keep them green into later in flower I'm going to try new nutrients.

 

[Greenadian]

Hey whats up @Dadman86 I use the same line up and have for years. I did try R.O and adding Cal-Mag and could never get the plants looking healthy. My tap water is at 8.2 ph and by adding the Advanced Nutrients first, then take the PH down little more ....... Reaching the 6.2 ph level. I don't usually use a full dose....ever, kind of read the plants but Im thinking close to half nutes

 

[BearWater]

Hey whats up @Dadman86 I use the same line up and have for years. I did try R.O and adding Cal-Mag and could never get the plants looking healthy. My tap water is at 8.2 ph and by adding the Advanced Nutrients first, then take the PH down little more ....... Reaching the 6.2 ph level. I don't usually use a full dose....ever, kind of read the plants but Im thinking close to half nutes

How accurate is their feeding chart for this lineup? Full dose on the chart too much?

 

[Greenadian]

Well I find it to be too much, and usually end up with nute burn or a lockout....then back to half doses to get the plants healthy again.

 

[Greenadian]

When in the seedling stages I don't use any nutrients other than Piranha. After a few weeks and plants are onto 4th nodes or more is when I use 10ml Grow and 10ml Micro in a 10 litre bucket, ph'd to 6.2. I don't start adding the Bloom until 1st week of flowering.
By the 3rd/4th week of flowering I cut out the Grow

 

[Dadman86]

When in the seedling stages I don't use any nutrients other than Piranha. After a few weeks and plants are onto 4th nodes or more is when I use 10ml Grow and 10ml Micro in a 10 litre bucket, ph'd to 6.2. I don't start adding the Bloom until 1st week of flowering.
By the 3rd/4th week of flowering I cut out the Grow

I been following what it said on bottle. All three every other feeding. There whole lives.
Week 4 is when I started feeding. I been over feeding than probably under. And the micro all the way to end. Fucking up big time and for like 3 whole runs. Thanks @Greenadian bro!
I should have known I could just use what is needed. For the stage of life.

 

[Dadman86]

Hey whats up @Dadman86 I use the same line up and have for years. I did try R.O and adding Cal-Mag and could never get the plants looking healthy. My tap water is at 8.2 ph and by adding the Advanced Nutrients first, then take the PH down little more ....... Reaching the 6.2 ph level. I don't usually use a full dose....ever, kind of read the plants but Im thinking close to half nutes

Ph pen is my next buy. I can't accurately say what pH my water is. Blue lab is good right?
Vivosun pH pen was junk. I calibrated with the solutions than cleaned off and stuck it back in solutions. Wasn't accurate on all 3. Like 2 points off wasn't even close to any.

 

[Greenadian]

Dude, I had the same Vivosun ph pen and it was a pain in the ass. Would test 3 times and was different each time
Been using an Aqua Master and it came with calibration liquid. Use it once a week, have the levels down pat now!! It was not expensive

 

[Dadman86]

Blue labs a hunnid. I'll look for that kind.
Yeah 15 bucks is pretty cheap for a tool like that.

 

[Dadman86]

Just found a 50 cfm bathroom exhaust fan.
Has four inch exhaust. The veg area has 4 inch air vents. Brand new and free. Landlord left a bunch of random shit in our pull barn.

 

[BearWater]

Just found a 50 cfm bathroom exhaust fan.
Has four inch exhaust. The veg area has 4 inch air vents. Brand new and free. Landlord left a bunch of random shit in our pull barn.

that’ll be nice! Are you going to exhaust the air out? : )

 

[Dadman86]

that’ll be nice! Are you going to exhaust the air out? : )

Yeah bro. The Vipar Spectra raises the temp in there at 50%
Not dangerous high but it gets humid and muggy with humidifier running.

 

[BearWater]

Yeah bro. The Vipar Spectra raises the temp in there at 50%
Not dangerous high but it gets humid and muggy with humidifier running.

Right on! That’s a great score for your project! : )

 

[amneziaHaze]

I got the bluelab pen for a year now.its still working bit you have to calibrate it every month.

had the Apera ec pen as soon as the garantie ended same day the pen died....

 

[Dadman86]

@figolus bro 7 days old. 15 days cut them someplace right. You called it something I don't know what it is. But I'm gonna cut that mother.

 

[Dadman86]