Log In Register

WaKe'N'bAkE

  • Thread starter Thread starter 420alldaze
  • Start date Start date
  • Tagged users Tagged users None

WaKe'N'bAkE

420alldaze 2,159 Replies 222,434 Views
Page 58 of 108 · Replies 1,141–1,160 of 2,160
2c983e1bc34a  1347206704000
E12c91440a32  1347222155000
2f46f1dcc777  1347205335000
smokin some erl from some cured hindu kush
 
sunday!!!!

good mornin to all early risers.and late ones too..:sleepylol... today im smokin on some very dense nugs of brick weed. i know i know, its not hi test. but for middies its not bad.smokes real slow and has a sensi bud kinda taste.. enjoy the day!!
p232.jpg
p147.jpg
peacentreez

you know i dont really toke these kind of buds but i have a real respect for that pukka looking dank :)
 
im finally gonna buy an erl rig, but a lil unsure as to which type cuz i have $150+/- to spend , slide, ti curve skillet, glass nail, titanium nail, lots to consider here,,plus i need a butane torch still ,been usin my gas stove and my vaporizer whip with decent results, but wasteful,,anyhow, is any type more user friendly than others......I was wanting a handheld bubbler with the ti curve skillet,, but its pricey to buy at one time.....so im thinkin on this SYN GLASS 45 x 5mm straight
FEATURES: straight bottom
three ice pinchers included
slide joint 14 mm female
slide: 14 mm clear Male push slide
Downstem: 14/18 mm Low profile diffused downstem included
Downstem length from top to ground joint to end 3.50" inches
Height :13.00 inches
base diameter 4.75 inches
glass thickness 5 mm
tube diameter 45 mm
Label: SYN large vetical black & white label included
made in n carolina

$120 im thnkin if i get this one,, i can get a ti nail later on ,, but I am open to erl rig ideas from anyone here,,,thx in advance ..again...;)

any guidance from ya erl people is much appeciated,,,especialll since ya got me hooked on it!1 hehe nah, im good,,, amazing product bho! cant wait to run some fresh nugg again when outdoor is ready,,,
 
im finally gonna buy an erl rig, but a lil unsure as to which type cuz i have $150+/- to spend , slide, ti curve skillet, glass nail, titanium nail, lots to consider here,,plus i need a butane torch still ,been usin my gas stove and my vaporizer whip with decent results, but wasteful,,anyhow, is any type more user friendly than others......I was wanting a handheld bubbler with the ti curve skillet,, but its pricey to buy at one time.....so im thinkin on this SYN GLASS 45 x 5mm straight
FEATURES: straight bottom
three ice pinchers included
slide joint 14 mm female
slide: 14 mm clear Male push slide
Downstem: 14/18 mm Low profile diffused downstem included
Downstem length from top to ground joint to end 3.50" inches
Height :13.00 inches
base diameter 4.75 inches
glass thickness 5 mm
tube diameter 45 mm
Label: SYN large vetical black & white label included
made in n carolina

$120 im thnkin if i get this one,, i can get a ti nail later on ,, but I am open to erl rig ideas from anyone here,,,thx in advance ..again...;)

any guidance from ya erl people is much appeciated,,,especialll since ya got me hooked on it!1 hehe nah, im good,,, amazing product bho! cant wait to run some fresh nugg again when outdoor is ready,,,
my bubbler is kind of a pain to use,,wish i would have got a stand up piece..that all i can put out for you bro..kinda a rookie here too :)
 
SYN is quality glass for the price, as is zob. I used to have a stand up sherbler from SYN. My biggest peeve with any type of water pipe is splash bong water on or in your mouth is awful design, and it's quite common.

outwest
 
SYN is quality glass for the price, as is zob. I used to have a stand up sherbler from SYN. My biggest peeve with any type of water pipe is splash bong water on or in your mouth is awful design, and it's quite common.

outwest
thats the best part of my piece....it has rings that stop splash...you would have to turn it upside down to get water in your mouth ;) lol like a beer bottle
 
morning all..:D...sipn on some mystery nugz,,and its so dry around my parts..i dont even care what the name is as long as its good ;)...new edition to the family,, a buddy got in a bind a needed some one to take one of his females
DSC02500
DSC02501
 
morning all..:D...sipn on some mystery nugz,,and its so dry around my parts..i dont even care what the name is as long as its good ;)...new edition to the family,, a buddy got in a bind a needed some one to take one of his femalesView attachment 250780View attachment 250781
bud looks good and so does the pup. thats real cool of you to take her on.
 
im finally gonna buy an erl rig, but a lil unsure as to which type cuz i have $150+/- to spend , slide, ti curve skillet, glass nail, titanium nail, lots to consider here,,plus i need a butane torch still ,been usin my gas stove and my vaporizer whip with decent results, but wasteful,,anyhow, is any type more user friendly than others......I was wanting a handheld bubbler with the ti curve skillet,, but its pricey to buy at one time.....so im thinkin on this SYN GLASS 45 x 5mm straight
FEATURES: straight bottom
three ice pinchers included
slide joint 14 mm female
slide: 14 mm clear Male push slide
Downstem: 14/18 mm Low profile diffused downstem included
Downstem length from top to ground joint to end 3.50" inches
Height :13.00 inches
base diameter 4.75 inches
glass thickness 5 mm
tube diameter 45 mm
Label: SYN large vetical black & white label included
made in n carolina

$120 im thnkin if i get this one,, i can get a ti nail later on ,, but I am open to erl rig ideas from anyone here,,,thx in advance ..again...;)

any guidance from ya erl people is much appeciated,,,especialll since ya got me hooked on it!1 hehe nah, im good,,, amazing product bho! cant wait to run some fresh nugg again when outdoor is ready,,,

I have got a straight syn, with several adapters, kinda typsy, base small, not alot of room for water, works well though, especialy with my VIP vapor catcher.
DSCN3306
DSCN3307
DSCN3308
DSCN3309
DSCN3310

I have also seen this silika rig for around $120. Check out brothers with glass, for concentrate bubbs.
BWG-SGPB14-2T.jpg


In other news, workin on my smart pot/tomato cage scrome for next round, may have to put in an order for some custom hairnets, 420.:D
DSCN3303
DSCN3304
DSCN3305

Wakin and bakin.
 
In other news, workin on my smart pot/tomato cage scrome for next round, may have to put in an order for some custom hairnets, 420.:D

too funny MST! thx for postin rig pics,, prolly gona get the SYN for 120,, or may step up to 160 for anicer SYN w/a perc

ill b postin some pics once i get it fo sho

in the mean time i have been rockin some friends heads with erl hits, kinda sad it took me 40 yrs to make some erl, but im good now...:D
 
Page 58 of 108 · Replies 1,141–1,160 of 2,160
Back
Top Bottom