vonwolfen

Posts

338

Reactions

96

Joined

Jan 31, 2010

Points

43

Feb 23, 2010

#1

I have seen lot of people using the 50watts(min.) a Square foot as a rule of thumb. I have also seen a few people using a specific number of plants per watt as(ie 1000watts=6-8plants, 600watts=4-6 etc)..Are these different opinions or something completely different?
Also if I do the Watts per Sq FT do I calculate in fluorescents as well? I am using T5 fluorescents, 1 4' light magnetized to each side of the ballasts(color is 5000 to give a better overall spectrum with the HPS light running at 2500).....Thanks in advance

 

~xO Kakalak Ox~

Calyx Bros. Seed Co.

Posts

255

Reactions

144

Joined

Feb 23, 2010

Points

43

Feb 23, 2010

#2

I would use a 1000w for a 4x4 area or a 600w for a 3x3 area.

 

vonwolfen

Posts

338

Reactions

96

Joined

Jan 31, 2010

Points

43

Feb 28, 2010

#3

Ok thank you...

 

C

captain.koons

Posts

95

Reactions

1

Joined

Aug 17, 2008

Points

8

Mar 2, 2010

#4

the 50w per sq ft minimum was written in a marijuana botany book i think clarke's as an optimal amount of light. more can be utilized, Swerve uses 100w per sq ft and gets great results.

I've used anywhere from 60-90.

plant spacing is completely opinionated, I say regardless of your plant count make sure you have a full canopy. IE, looking down above your plants you should see nothing but leaves.

 

Z

zooted

Posts

69

Joined

Jul 23, 2009

Points

6

Mar 2, 2010

#5

since it is inside and in pots I would agree that it is light per square foot. the bigger area for a plant the larger it gets. That assuming your using a strain of high caliber with big yields that can take advantage of the light provided. Optimal try and match 10,000 lumens per square foot-or that equal to the sun on a summers day.

 

J

Johnnyblaze2010

Posts

27

Reactions

2

Joined

Feb 27, 2010

Apr 7, 2010

#6

True

~xO Kakalak Ox~ said:

I would use a 1000w for a 4x4 area or a 600w for a 3x3 area.

Click to expand...

I agree with Kakalak. That is the optimal condition; 1000w/ 4x4 area or 600w / 3x3 area.

 

Fred Flintstoned

Posts

33

Reactions

5

Joined

Nov 12, 2008

Points

8

May 1, 2010

#7

50w per foot is a baseline measurement. More is better, to a point. Beyond 90 or so I'd say you're wasting your money.
Plants to the square foot measurements are in direct relation to weeks of vegging. This changes with every strain, It's something you'll have to figure out over time. A good starting point for a 50/50 hybrid would be 1sq. ft. for a 2-3 week vegged plant The more Indica, the more veg time, the more Sativa,less time.
Fred

 

4

420king-spaded

Guest

Jul 5, 2010

#8

42x42 single 600 8'x42'' if running two 600s