crispyow
- 7
- 3
that branch was getting light 50% of the time (when i would rotate them). there were two other lower branches on the clone that died just like this one. the one with the shriveled branch is the clone btw and it’s directly under the light (250w about 3 - 3½ ft away) bc it’s the smallest. the clone definitely got a little light burn but that was weeks ago and i moved the light higher up after i noticed. it’s gotten worse since i gave it flower nutes and the newest leaves on the clone turned glossy. the clone is definitely in the worst shape but the smaller female i have is in bad shape too and i would rly hate to lose her ):Are those shriveled branches on the bottom getting light? the other leaves with tip burns looks like light burn how close is your light and how many watts?
When you changed to flower did you reduce the nutes? Or did you increase the light power (intensity)?that branch was getting light 50% of the time (when i would rotate them). there were two other lower branches on the clone that died just like this one. the one with the shriveled branch is the clone btw and it’s directly under the light (250w about 3 - 3½ ft away) bc it’s the smallest. the clone definitely got a little light burn but that was weeks ago and i moved the light higher up after i noticed. it’s gotten worse since i gave it flower nutes and the newest leaves on the clone turned glossy. the clone is definitely in the worst shape but the smaller female i have is in bad shape too and i would rly hate to lose her ):
i changed the nutes entirely and switched to 12/12 instead of 18/6 light cycle is that not right? changed from a nitrogen-heavy nute mix to a phosphorus-heavy mix. i can give you the npks if you wantWhen you changed to flower did you reduce the nutes? Or did you increase the light power (intensity)?
nah i’ve had it the same the whole grow. the only difference was when they were just sprouting i had them under a very low watt bulbDid you increase the light power also?
Turn the lights up. When you change to flower, your DLI changed and that changes what and how much you feed. The lower your DLI, the less food the plant needs. You overfeed and it causes a lockout.nah i’ve had it the same the whole grow. the only difference was when they were just sprouting i had them under a very low watt bulb
thank you i didn’t even know about this. what would you recommend if i can’t change the light intensity?Turn the lights up. When you change to flower, your DLI changed and that changes what and how much you feed. The lower your DLI, the less food the plant needs. You overfeed and it causes a lockout.
thank you will doRead this:
What PAR are you cooking under ??
Running the led 1750 gavitas what Par are people running in flower ? Have it set 950-1050 par mid flower (top of canopy) at 90% watt usage. Ran the area at max with different strains previously. running co2 at 1500-1600 ppm what par are people running ? Gelatto 33 day 32www.thcfarmer.com
Lower it a bit. Not too much. And cut your feed amounts by 20%thank you i didn’t even know about this. what would you recommend if i can’t change the light intensity?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?