bigmikeyg
- 248
- 63
room was 79-80 gave it silica ever other weekslike the nutes i fed it were too hot or the room to hot ?
room was 79-80 gave it silica ever other weekslike the nutes i fed it were too hot or the room to hot ?
Bingo... The room was too hot and you didnt have proper co2 levels to hammer nutes that hard..cut it in half.like the nutes i fed it were too hot or the room to hot ?
i thought i was good at 80 to stay under the 85.. what’s optimal to not cause this death to the plantBingo... The room was too hot and you didnt have proper co2 levels to hammer nutes that hard..cut it in half.
The plant can live at 90... Air exchange and less nutes will help ya i beti thought i was good at 80 to stay under the 85.. what’s optimal to not cause this death to the plant
i’m always in for something new what are those lights ?https://www.thcfarmer.com/community/threads/samsung-f564b-build-for-5-x-10-grow-room.93109/
Each fixture is stronger than a 500 watt HPS and that's in lumens not in comparison. It's also the same price as building an HPS which means you're going to be spending about half the power. If you're interested and want to know more about it just let me know I'll help you out. Let you know where I got everything the price is all of that.
which ones would be good for. a 4x4x6 tent that would be close to what. 1000 hps puts outSamsung f564b strip led lights and they come in different ranges. 3500, 4000, 5000, 3000.
https://www.digikey.com/catalog/en/partgroup/f-series-gen3/67179
ec?Screw that use the LED fixture I built and you'll be happier than anybody.
People don't talk about this a lot but the strength of your fixture also has a lot to do with how much nude you can run not only CO2.
People would never think of running the EC that I'm running without CO2 but with my light fixtures they grow like hotcakes. I'm running an EC anywhere between 2.4 and 2.0 after water loss. Most people would tell me I'm going to burn the shit out of my plants with an EC that high but nope if I go any lower I start to get deficiencies.
EC is the true representation of nutrient level or PPM. PPM is either a .5 or .7 scale of EC.
Another unit of measure like ppm.
do the 315 put out less heat than one hps ? yeah i ordered the one ended hps with the vented reflector from amazon for 300 canadian... i have tent in basement and i want to keep it cool with the one inline 6 inch fan and carbon filter pulling through the fixture as even with the two chinese 1000 watt led it got to 80... i’ve sincere jacked up the fan and go it to 77... just not sure if those 315’s say cold enough just venting the tentAnother unit of measure like ppm.
Brother, a cheap ppm meter from amazon will save you a bunch of headaches. Give enough water to your plants to have 10-30% runoff so you can measure solution going in and then going out that way it tells you how hot your soil is. For exemple if you give 400ppm to your plants and runoff comes out at 600ppm, you know the water held by your medium is around 800. Some people feed every other watering but I feed less every watering since I know how hot my coco is. With pre amended mix (I’m using cocoloco) I put almost no nutes (400ppm) to my flowering plants and the runoff will come out at 1200ppm. Hope this helps.
Also if you’re not trying to spend big cash or do a diy you could switch to 2 LEC fixtures at 315w each they’ll give you more coverage than a 1000w hps, you’ll have true colors of your plants (better to spot deficiencies), the spectrum is much better than hps and youre only pulling 630w instead of 1000w. If you got cash I’d go with some fancy led quantum boards or cobs. I bought a single ended Chinese hps and it gets the job done but def wish I would’ve bought lec.
Peace
I don’t think there is anything wrong with 80 degres and I don’t think you’re burning your plants imo your problem comes from nutrients. The ppm meter will tell you.do the 315 put out less heat than one hps ? yeah i ordered the one ended hps with the vented reflector from amazon for 300 canadian... i have tent in basement and i want to keep it cool with the one inline 6 inch fan and carbon filter pulling through the fixture as even with the two chinese 1000 watt led it got to 80... i’ve sincere jacked up the fan and go it to 77... just not sure if those 315’s say cold enough just venting the tent