What is a easy & cheap method of mounting light block sheeting on the walls & ceiling?

[forknowledge]

Im in the middle of a new grow room & the time has come to line white sheeting all over the walls & ceiling. Im considering using white duct tape stick the sheeting on however I cant help but worry that the negative pressure way cause the sheeting to collapse.
Any ideas...?

 

[Dulce]

staple gun

 

[Cort]

+1 staple gun.

Small squares of construction paper or some other thick material between staple and panda will help guard against tears.

 

[Smokey503ski]

I would go with the plastic washer screw combination they sell at hardware stores.

 

[smokie]

use a screw and washer, the washer that has rubber on 1 side @ lowes by all the screws for a few bucks for 100 washers

 

[forknowledge]

Ive purchased tiny felt pads, theyll be nailed in on top of the sheeting to keep it in place & prevent tearing.
I just hope they sheets hold in place.

Thanks guys, any more ideas keep them coming.

 

[woodsmaneh]

I used a staple gun for round wire with masking tape or cardboard as a backer. The round staples make it easy to pull them out and paint will seal the small holes.

 

[monkeymun]

Staple gun.

By far the quickest and easiest way of mounting sheeting. Don't get the smallest size staples as they might pop out.

 

[Badmf]

Had cardboard strips along seams to staple into.