what ph level to keep a ez cloner at ?

[dirtyglovedank]

just got a ezcloner from a friend unused and dont see much on them.
what ph are you using and what nute solution is everyone adding? how often to clean...any info, tips or tricks wpould be great .thanks
keep it greeen
DGD

 

[dirtyglovedank]

i just put water r.o and clonex liquid balanced it at 6.5 ph now its 6 hrs later and its back up to 7.5 whats going on anyone have any experience with getting good results with these cloners ?
keep it green DGD

oh heres some bud porn for (food for thought)

 

[ibTheMan]

6.0, Dont use RO, no good, Use tap water at 6.0

 

[dirtyglovedank]

6.0, Dont use RO, no good, Use tap water at 6.0

thanks ib for stoppin by

i put ph to 6.4 and it went back up to 7.5 6hrs later ?
do i treat this like a aero system ?
DGD

 

[norm]

thanks ib for stoppin by

i put ph to 6.4 and it went back up to 7.5 6hrs later ?
do i treat this like a aero system ?
DGD

go on the ez clone website and follow those directions. should work great for you

 

[audius]

6.0, Dont use RO, no good, Use tap water at 6.0

good info. i use a diy cloner to & i love it. 100% sucess rate so far & ive been using it for close to a yr & 1/2 . i just use tap water not phed for the first week or untill i see the lil white bumps. then i use ro water with about 250 to 300 ppms. phed to 6.0. :pimp:

 

[sedate]

6.0, Dont use RO, no good, Use tap water at 6.0

What!?

Tap water in a cloner?!

Why the hell would you do that?

 

[dirtyglovedank]

i just found out from ez clone and other sites
they say no organic ph up or down it DRIFTS ph too much (which i use).
and you need to set it lower 5.2 cause it will go higher in the first 24-48 hrs to 5.8-6.3 aprox and use ro water or tap ..no distilled it dosent have good results.and rez temps around 70-72.
and keep checking the ph .
anyone got insite to any of this?
DGD

 

[true grit]

What!?

Tap water in a cloner?!

Why the hell would you do that?

It is actually what the EZ Clone designers suggest. R&D cats told me just use tap water and a rooting gel and screw temps. Its no longer about low temps, they said that was the old school of thought with them... they did suggest a root gel thats water based like Root tech tho.

 

[dirtyglovedank]

It is actually what the EZ Clone designers suggest. R&D cats told me just use tap water and a rooting gel and screw temps. Its no longer about low temps, they said that was the old school of thought with them... they did suggest a root gel thats water based like Root tech tho.

thanks for stoppin by trie grit :hi
did you talk to them about what to use for ph up and down?.
thanks
DGD

 

[dirtyglovedank]

good info. i use a diy cloner to & i love it. 100% sucess rate so far & ive been using it for close to a yr & 1/2 . i just use tap water not phed for the first week or untill i see the lil white bumps. then i use ro water with about 250 to 300 ppms. phed to 6.0. :pimp:

hello audiius
yeah its my first hydro/aero anything
illl try the plain water first .sounds the safest route.
and thanks for the info :hi
DGD

 

[audius]

you can use gh ph up & down. works just fine.

 

[freegrow]

It is actually what the EZ Clone designers suggest. R&D cats told me just use tap water and a rooting gel and screw temps. Its no longer about low temps, they said that was the old school of thought with them... they did suggest a root gel thats water based like Root tech tho.

this is the ticket here . I use a diy cloner r/o water dip clones in clonex gel place in neo. insert and in six days roots 100% root formation ( its when I take them out that I might kill the .LOL ) also it seems to me that warmer temps work better like softens the cut in prep for roots JMO

you can use gh ph up & down. works just fine.

this is what I use and its water only so I set it at 5.8 hydro works every time even with plants 2 weeks in to 12/12 :hi

but its cool just fool with it see what you like they are bad ass for fast clones

 

[bloads]

What!?

Tap water in a cloner?!

Why the hell would you do that?

Tap water has PH buffers, RO water doesn't. It'll hold PH longer. Also, it has a small amount of nutrients that RO doesn't. When your plants finally do get roots, they don't want to starve, the small amount of 'food' in tap water is preferable to starving.

It is actually what the EZ Clone designers suggest. R&D cats told me just use tap water and a rooting gel and screw temps. Its no longer about low temps, they said that was the old school of thought with them... they did suggest a root gel thats water based like Root tech tho.

Aren't low temps because a certain root mold/fungus thrives @ 73+ or something? My last run of ezcloner only produced 5/19 spots, the rest developed some brown/black mold/sludge that killed them. That run did occur during a heatwave though, I'm attributing it to that.
Switched to grodan cubes because they're supposed to be easy too, but somehow I'm fucking that up... going to go back to ezcloner I think.

 

[dirtyglovedank]

you can use gh ph up & down. works just fine.

i got "pro" (synthetic)ph down and its keeping the ph at 6.1 no drift
so yes the organic down and up do drift alot in these cloners
DGD

 

[dirtyglovedank]

Tap water has PH buffers, RO water doesn't. It'll hold PH longer. Also, it has a small amount of nutrients that RO doesn't. When your plants finally do get roots, they don't want to starve, the small amount of 'food' in tap water is preferable to starving.




Aren't low temps because a certain root mold/fungus thrives @ 73+ or something? My last run of ezcloner only produced 5/19 spots, the rest developed some brown/black mold/sludge that killed them. That run did occur during a heatwave though, I'm attributing it to that.
Switched to grodan cubes because they're supposed to be easy too, but somehow I'm fucking that up... going to go back to ezcloner I think.

try the ez clone rez clear and alittle bit of hydrogen peroxide
i had to clean and scrub already cause brown mold appeared 24 hrs after first fire up
now clean smelling and bumps are starting too pop out already (very small)
im also using some dynagro K L N
its what ezclone reccomends
gonna try hormex soon to see if helps
ill let you guys know how the roots are day to day

oh yeah the strains are whitefire, fire bubba,chem xxx, Chemdog's Sister
keep it green
DGD

 

[The Humanure]

ZOMFG THREAD 2011~~~

OLD MAN FIGHT!!!

 

[413Grower]

I run my psycloner at 5.8 PH and have 100% success...water usually about 75F

 

[Springerguy]

i just put water r.o and clonex liquid balanced it at 6.5 ph now its 6 hrs later and its back up to 7.5 whats going on anyone have any experience with getting good results with these cloners ?
keep it green DGD

oh heres some bud porn for (food for thought)

is that strain pink panties? Looks like it- Ive been trying everywhere to find seed with no luck- sunset sorbet is the closet thing

 

[XxTheWolfxX]

is that strain pink panties? Looks like it- Ive been trying everywhere to find seed with no luck- sunset sorbet is the closet thing

You can’t get the original pink panties genetic unless your in sherbinskis inner circle. But he did team up with humboldt seeds and create a strain called lingerie which is pink panties x 3 kings blueberry headband. It’s a nice strain.