Contact Us
Want to advertise here? Contact us today to begin

Gavita Pro 1650e Led Vs Spydr 2i/p

Discussion in 'L.E.D Grow Lights' started by Burned Haze, Nov 7, 2018.

  1. Gavita Pro 1650e LED

    Well has anyone tried this led or seen any journals online with this led yet ? I would love to see some input and opinion cause gavita is def trying to fight in the led game

    Sounds interesting to sound the least... ( I’m in no way affiliated or advertising this company , just wanted to bring their new led up to discussion/see if anyone has any views )

    The Gavita Pro 1650 LED ML is 1650 µmol s-1 fixture with an efficiency of 2.6 µmol s-1 per watt. ML stands for Multi-Layer, as the array of LEDs provides a uniform spread of light at short distance to the crop. The array configuration of 8 LED bars also allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This fixture is built with high quality 120-270 volt Philips advance drivers. Power cords sold separately.

    The Gavita Pro 1650e LED ML LED grow light can be used in commercial grows (horizontal and vertical), greenhouses, home grows (rooms and tents) or in climate rooms. The thin 2.1 inch profile is also ideal for low rooms or over benches.

    Boasting an incredible 2.6 umol/J and a light output of 1650 umol/s the Pro1650e LED ML provides high-intensity full spectrum light over its entire 4'x4' to 5'x5' flowering footprint. The wide 8-bar form factor helps to provide even coverage across your canopy.

    This fixture is passively cooled and is built with high-quality 120-277V Philips Advance LED Drivers for optimum performance.

    Features and Benefits
    • Full spectrum with enhanced red for full cycle grows
    • Wide 8-bar form factor for even canopy coverage
    • 646-watt power draw to replace a 1000W HPS
    • 1650 umol/s light output
    • 2.6 umol/J efficiency
    • 120-277V adaptable driver
    • Compatible with Gavita Master EL1 and EL2 Gen 2 Controller for full lighting control
    Product Notes
    • The 120V and 240V cords include a plug. The 277V contains an open end cable (open wire leads).
    • The E-Series adapter is only needed if you are connecting the LED fixture(s) to a controller. Otherwise, only a power cord is needed to operate the fixture.
    Product Specs
    • Wattage Draw: 646 watts (120V), 629 watts (208-240V), 629 watts (277V)
    • HPS equivalent: 1000 watts
    • Spectrum: Full-spectrum white with enhanced red for seed to flower growth
    • PPF (light output): 1650 umol/s
    • PAR Efficacy: 2.6 umol/J
    • Coverage area: Flowering footprint: 4'x4' to 5'x5' (16 to 25 sq ft), Vegetative footprint: 6'x6' to 7'x7' (36 to 49 sq ft)
    • Dimensions: 44.1 x 44.1 x 2.1 in (112 x 112 x 5.3 cm)
    • Product weight: 28.4 lbs (12.9 kg)
    • Temperature Ambient: 68 ~ 86° F / 20 ~ 30° C for optimal functioning
    • Operating/input voltage: 5.4 A (120V), 2.6 A (208-240V), 2.3 A (277V)
    • Additional details: ETL certified; Can be connected to a Master controller with optional Gavita E-Series Adaptor
    • Product includes: Light fixture [unless selected with options (i.e. cord, controller)]
    • Recommended for: Commercial grows, Greenhouses, Home grows (rooms and tents), Soil, hydroponic, aeroponic, or aquaponic systems, Indoor farming or gardening
    • Manufacturer's Warranty: 3 years (see product specs for details)
    The Gavita Pro 1650e LED is a 1650 µmol s-1 fixture with an impressive efficiency of 2.6 µmol s-1 per watt. The Pro 1650e LED delivers broad coverage with its' 8 passively cooled LED bars. It can be used in a top light or multi-layer application. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. This fixture is built with high quality 120-277 volt Philips brand drivers.

    The Gavita Pro 1650e LED is a project fixture by design. It installs right out of the box, reducing installation costs. Built around high-quality Philips-Advance drivers and top bin LEDs, the Gavita Pro 1650e LED breathes functionality and robustness. Its low height and external interface make it ideal for multi-layer cultivation. Various mounting systems (fixed brackets) are available. 4 adjustable Sun Grips light hangers are included with the fixture.

    With 1650 μmol s-1 total output, the Gavita Pro 1650e LED is a flowering fixture. It can achieve a high average ppfd of 1000 μmol s-1 m-2 on your crop. For mixed vegetative / flowering environments and to tune the amount of light to the cultivars you grow, the Gavita Pro 1650e LED can be dimmed to 50% without any loss of efficiency. The high fixture efficiency of 2.6 μmol s-1 per Watt enables you to finally leap ahead in reducing your HVAC capacity by about 30-40% compared to regular open HPS/MH solutions. The high efficiency and low powered LED configuration with 8 LED bars reduces the temperature of the LEDs – increasing the output and improving their light maintenance.

    Our combination of white and red LEDs result in a relatively high ratio of blue light. Blue light keeps your crop compact in the vegetative stage and adds to an optimal morphogenesis and light interception by the plant. It maintains the photosynthetic system of the plant to optimize its photosynthetic potential and can shorten your flowering period. Blue light also triggers stomatal opening during the light period. The spread of red LEDs in the array guarantees a uniformly mixed spectrum on your crop at short distance. A full spectrum increases the quality of your crop.

    The Gavita Pro 1650e LED is compatible with the Gavita Master controllers. It is equipped with an external e-series (Repeater Bus) adapter to which you connect power and control signal. The Gavita repeater bus control interface allows you to install 500 fixtures per controller port by simply daisy chaining the fixtures. The fixture is universal for 120-277 volt systems. Depending on the required voltage, we supply a cable with 120V plug, 240V plug, or open-end cable for industrial voltages and custom installations. The cables are connected to the e-series adapter and the fixture by means of an industrial-grade “
    CrimsonEcho, 1diesel1 and SoLowDolo like this.
  2. Very interested to see if anyone has used it. I just seen it for the first time a few days ago and am very interested in it. Too bad it is so expensive.
  3. Well I bought (4) spydrx plus less than 6 months ago and that was 1,500+Each , I would love to see the difference in their performance and what they can do for a 4x4 table range
    CrimsonEcho, SoLowDolo and 1diesel1 like this.
  4. Anther cool led that came out is by fluence and it looks very similar to the led above and it’s called SPYDR 2I

    The SPYDR 2i is a high-performance top-lighting solution for commercial cannabis growers who want to push the envelope with high-PPFD cultivation practices and experimental applications or treatments.

    PPF: 1700 µmol/s
    Efficacy: 2.7 µmol/J
    Input Power: 630W

    If I could edit the thread title/ main topic to Gavita Pro 1650e vs. spydr 2i/p

    Both companies are doing it right and have the name and cert/titles to prove it ( unlike so many companies in the led world .... )

  5. Not yet heard of anyone using these yet. I do believe it's fairly new still.
    Burned Haze likes this.
  6. Very cool ty for sharing! Wonder if Gavita is using samsung LEDs like Fluence or maybe they designed their own.

    Somebody with monies will test them both eventually.
    Burned Haze likes this.
  7. Rootbound

    Rootbound Moderator Staff Member

    Changed the title for you.
    Burned Haze likes this.
  8. Here’s a review someone made on gavitas version ( well done I might add )

    FutureGrower, 1diesel1 and SoLowDolo like this.
  9. First time poster and currently on my first grow as well. Have 3 spydr 2I that should be shipping any day now. I'll update as they arrive
    Burned Haze likes this.