Council Of First Knowledge, Jedi Temple Training Facility

[Wisher619]

I got 1 in jars. About 56g. .. I got another one hanging whole. Been hanging about 36 hrs... just cut the base and hung it upside down. And the skunk 3 is on nothing but h20... probably harvest Sun...

nice...sounds good
have you sampled any from the jar yet?

 

[EventHorizan]

nice...sounds good
have you sampled any from the jar yet?

Ya. It's got a Lil smell to it now. Guess I was expecting to open the jar and have it knock me over lol... I will learn a great deal more as I flower out this Delicious Candy photo... Who already has a smell to her. And female pre flowers... Guess by 60 days they show some preflowers always?

 

[EventHorizan]

So how long should I hang it? Here 8th what I was thinking. I have had it hanging for about 36 hrs. I think I will pull the fan leaves off and hang it for another day. The snip branches and put in box,,, etc... just seeing if hanging it whole helps with holding on to some taste smell characteristics. .. I want to improve the taste and smell of what I'm working with in the future. ..

 

[Wisher619]

So how long should I hang it? Here 8th what I was thinking. I have had it hanging for about 36 hrs. I think I will pull the fan leaves off and hang it for another day. The snip branches and put in box,,, etc... just seeing if hanging it whole helps with holding on to some taste smell characteristics. .. I want to improve the taste and smell of what I'm working with in the future. ..

I hang it until it is completely dry
I then cut the individual buds from the branches and put them in a paper bag for about 24 hours
I then dry trim
and go to the jar
my drying.....takes me anywhere between 7-10 days

completely dry to me means hard but not crumbling apart....so crispy....but not to the point of breaking apart when you squeez it
the sugar leaves might break apart and crumble....but not the buds
you should be able to run your finger over the buds and be able to break some of the sugar leaves off
at that point....they are jar bound

 

[EventHorizan]

I hang it until it is completely dry
I then cut the individual buds from the branches and put them in a paper bag for about 24 hours
I then dry trim
and go to the jar
my drying.....takes me anywhere between 7-10 days

completely dry to me means hard but not crumbling apart....so crispy....but not to the point of breaking apart when you squeez it
the sugar leaves might break apart and crumble....but not the buds
you should be able to run your finger over the buds and be able to break some of the sugar leaves off
at that point....they are jar bound

It is a lot easier to have patience when you are confident in your procedure. But for some reason I feel pretty good about how things are progressing... My seedlings look like Temps and humidity and I've seen some Lil flying things are taking a Lil toll. See something that I hope isn't mold or something of that nature... My bag seed seedlings are just running away with the show. One has roots I swear over a foot long. I wish I knew if it was a female. Tom my new light should be here and time to transplant all these seedlings. Can I run 1 t12 to keep all these seedlings alive in solo cups. Couple 32w bulbs compared to these 54ho bulbs.. my electric keeps climbing and this new light is gonna add to it. If I would of known that everything was gonna live and do well, I wouldn't of popped all them seeds!

 

[EventHorizan]

And I thought that I needed dry leaf for bubble hash? But everything I been reading says fresh. I'm talking about using the ice in the bag in the bubble hash mixer then straining they different size bags. So do I need wet or dry?

 

[EventHorizan]

And I have been topping off with ro... for a couple days. I'm sure ppm isn't much. Do I need to pH the ro water? Cause I havent...

 

[Wisher619]

It is a lot easier to have patience when you are confident in your procedure. But for some reason I feel pretty good about how things are progressing... My seedlings look like Temps and humidity and I've seen some Lil flying things are taking a Lil toll. See something that I hope isn't mold or something of that nature... My bag seed seedlings are just running away with the show. One has roots I swear over a foot long. I wish I knew if it was a female. Tom my new light should be here and time to transplant all these seedlings. Can I run 1 t12 to keep all these seedlings alive in solo cups. Couple 32w bulbs compared to these 54ho bulbs.. my electric keeps climbing and this new light is gonna add to it. If I would of known that everything was gonna live and do well, I wouldn't of popped all them seeds!

yeah you can use a T12
take some pictures of the mold looking stuff and

for the flying things
I would use spinosad spray...just get the concentrate...like Captain Jacks and mix with water
and get Einstein Oil
week one...spray with Spinosad
week 2 spray with Einstein Oil

you only need to spray once a week...but keep it on the same day...say sunday morning...once a week

will protect the leaves and keep the bugs away....dont worry it is organic.....and not some crazy chemicals....you can use it up to the 2nd week of flower

then you don't want to spray anything on flowers

if there is some type of mold on the leaves...like PM take it out and toss it in the fire pit/fire place/BBQ

 

[EventHorizan]

I head down there in a min and get some pics...

 

[Wisher619]

And I have been topping off with ro... for a couple days. I'm sure ppm isn't much. Do I need to pH the ro water? Cause I havent...

no PHing the h20......so I had a long discussion with some people a while back about this.....

plants make there own ph at the root zone....on top of that....plants only need minerals and salts @ the correct ph to be used....but water is used no matter what because if it doesn't have any minerals/salts in it the plants isn't taking in any minerals or salts
so no....no PH of the RO

 

[Wisher619]

And I thought that I needed dry leaf for bubble hash? But everything I been reading says fresh. I'm talking about using the ice in the bag in the bubble hash mixer then straining they different size bags. So do I need wet or dry?

you can use it wet or dry.......I dry sift....but I have also used the trim dry for Bubble
to me it actually works better
before you make it...throw the trim in a bag for 24 hours...then drop it in the bags with ice and h2o.....you are good to go

 

[EventHorizan]

Give me a few. Got to charge my battery.

 

[EventHorizan]

no PHing the h20......so I had a long discussion with some people a while back about this.....

plants make there own ph at the root zone....on top of that....plants only need minerals and salts @ the correct ph to be used....but water is used no matter what because if it doesn't have any minerals/salts in it the plants isn't taking in any minerals or salts
so no....no PH of the RO

That is exactly what I read somewhere too! Just wanted confirmation.

 

[Wisher619]

this is how I make my hash
Dry Ice method......

 

[EventHorizan]

@Wisher619 So I am moving the photo into the flower tent. Well actually I already have :)..
But anyway I am making up a new bucket res. What should I run this week nute wise being under the mh and last week of veg?

 

[EventHorizan]

By the way buds were getting just slightly crispy so I took the plant down, trimmed it, and put it in a jar with metal lid part removed, and replaced with paper bag, and humidity pack in there/ I didn't realize to the last min that I don't have no paper bags. Luckily i had some paper that came in a package. Not the way I had it planned but I am confident my contraption will work. Buds were 10x sticky and glossy even after hanging 5 days. Still has some drying to do, but weight at this moment is 122g... I think i am walking away with at least 80, if not a little more. Prob 50 grams of shit i refused to clean,, lil buds,, f that,, i'm not messing with it. I will make something out of it when I got about a 2lbs of it.

So 55g dried skunk 1
Skunk 2--- 122g (preliminary),,,,, 80 (estimated dried)
Skunk 3--- ?(preliminary),,,, 160g (guess)


DID I MENTION THIS SHIT HERE WAS STICKY :) buds are lighter, it looks a lot better quality! And we still got skunk 3 in cold dark storage,,, and she is the biggest?
How much weight Wish do I have to achieve on skunk 3 to puff my chest out a lil? What would be a weight for an auto, that I could really be proud of? Well both of us since you helped the whole way :)

 

[EventHorizan]

She is in her new home....

 

[Wisher619]

dont use the humidipak
not until it is completely dried and cured
just close the lid on the jar....open it in a few hours and put the bud on the dry rack
when crispy again put back in the jar
after it is done
and ready to cure...keep the lid closed for 2 weeks
then once cured you can store with humidipack
they are only for long term storage
they will zap smell

as for the res
just keep on the same feed
7.5/10/2.5

 

[Wisher619]

By the way buds were getting just slightly crispy so I took the plant down, trimmed it, and put it in a jar with metal lid part removed, and replaced with paper bag, and humidity pack in there/ I didn't realize to the last min that I don't have no paper bags. Luckily i had some paper that came in a package. Not the way I had it planned but I am confident my contraption will work. Buds were 10x sticky and glossy even after hanging 5 days. Still has some drying to do, but weight at this moment is 122g... I think i am walking away with at least 80, if not a little more. Prob 50 grams of shit i refused to clean,, lil buds,, f that,, i'm not messing with it. I will make something out of it when I got about a 2lbs of it.

So 55g dried skunk 1
Skunk 2--- 122g (preliminary),,,,, 80 (estimated dried)
Skunk 3--- ?(preliminary),,,, 160g (guess)


DID I MENTION THIS SHIT HERE WAS STICKY :) buds are lighter, it looks a lot better quality! And we still got skunk 3 in cold dark storage,,, and she is the biggest?
How much weight Wish do I have to achieve on skunk 3 to puff my chest out a lil? What would be a weight for an auto, that I could really be proud of? Well both of us since you helped the whole way :)

Im not sure
you have already pulled some awesome weight for an auto

 

[Wisher619]

By the way buds were getting just slightly crispy so I took the plant down, trimmed it, and put it in a jar with metal lid part removed, and replaced with paper bag, and humidity pack in there/ I didn't realize to the last min that I don't have no paper bags. Luckily i had some paper that came in a package. Not the way I had it planned but I am confident my contraption will work. Buds were 10x sticky and glossy even after hanging 5 days. Still has some drying to do, but weight at this moment is 122g... I think i am walking away with at least 80, if not a little more. Prob 50 grams of shit i refused to clean,, lil buds,, f that,, i'm not messing with it. I will make something out of it when I got about a 2lbs of it.

So 55g dried skunk 1
Skunk 2--- 122g (preliminary),,,,, 80 (estimated dried)
Skunk 3--- ?(preliminary),,,, 160g (guess)


DID I MENTION THIS SHIT HERE WAS STICKY :) buds are lighter, it looks a lot better quality! And we still got skunk 3 in cold dark storage,,, and she is the biggest?
How much weight Wish do I have to achieve on skunk 3 to puff my chest out a lil? What would be a weight for an auto, that I could really be proud of? Well both of us since you helped the whole way :)

the shit you dont want to clean
is prime for canna coco oil and bubble hash
I always use my trim and larf for that....although these day I dont really have any larf anymore because of my growing style
of complete lollypopping