Council Of First Knowledge, Jedi Temple Training Facility

[Thejoeybrown]

May as well toss them in the ditch they're done bud.

Not srs.

Obviously I'm the least knowledgeable on the subject but I wouldn't even be worried about it that early in flower. I did the same thing when I started my seeds a couple weeks ago. My timer had a mind of its own. Went from 12/12 to 24/0. I ended up just setting every single setting on there to 18/6. Idk what the deal is with it

Lol.
Na I'm more just mad at myself. Stoner move. Lol. I'm just hoping it doesn't push back sexing a couple days.
I want to get these things sexed so I can throw a net on them. Don't need extra stretch time. Lol

 

[EventHorizan]

So I made a boo boo. Lol.
It's day 4 of 12/12
No white pistils yet and no balls yet at all
Last night I was arranging things and checking my timer.
I forgot to put t on AUTO and left it on ON. FML!
so I hear the ac running and makes me curious so I crack door and the light is on. Got 6 hrs extra light

It's only day 4. Do I just let it turn back on normal time and just keep moving forward?
That's the plan.
Can this cause issues or am I ok since we haven't even shown pistils yet?
I figure it will slow down flower onset but as lon as we don't have any weird hormonal shift I'll be happy
@Wisher619

watch for herms tho..
Over the next week or so..
just pinch them off and dispose of them away from the plants.
After a couple weeks it shouldnt have any effect.
Im gonna bet it MAYBE throws a nanner, but thats it..
And I say maybe lightly..
Genetics plays a part in that too i would assume.
Some more prone to slight light leaks, where some are less..

 

[Thejoeybrown]

watch for herms tho..
Over the next week or so..
just pinch them off and dispose of them away from the plants.
After a couple weeks it shouldnt have any effect.
Im gonna bet it MAYBE throws a nanner, but thats it..
And I say maybe lightly..
Genetics plays a part in that too i would assume.
Some more prone to slight light leaks, where some are less..

Agreed. I'm gonna keep an extra close eye on the fem seeds
I think the regs will be ok but as always I'll have an eye on them.
I'm sexing them anyways so everyday I'm looking for signs.
The fems I have to look a little closer now. Out of the 15 or so other seeds I've popped of those fems I haven't had any sign of a nanner yet so that's good.

 

[EventHorizan]

Agreed. I'm gonna keep an extra close eye on the fem seeds
I think the regs will be ok but as always I'll have an eye on them.
I'm sexing them anyways so everyday I'm looking for signs.
The fems I have to look a little closer now. Out of the 15 or so other seeds I've popped of those fems I haven't had any sign of a nanner yet so that's good.

you are experiencing the extra time involved with many plants.
moving around and inspecting the plants.
More to feed.. Your gonna prob have to upgrade your res.
Flower they will prob consume 4 gal total a day.

 

[Thejoeybrown]

you are experiencing the extra time involved with many plants.
moving around and inspecting the plants.
More to feed.. Your gonna prob have to upgrade your res.
Flower they will prob consume 4 gal total a day.

? I'm confused. Feeding is a breeze I've had no problems. Got a 27 gal Rez. Will be more than enough.
I barely do anything in there. Most of my time in there is just looking at them Lol. Just left stupid timer on ON not AUTO. lol.

 

[EventHorizan]

Uses a MeanWell HLG-600H-36B driver. Hoping to get a hell of a harvest out of this thing :D

I'm in a 3x3x6 tent right now but I'm thinking I need to get a 4x4 to get the most out of this light. Thoughts on that?

Had them add a power meter to this thing as well. Does live watts, amps, volts, and kWh.

Again, not shilling just sharing my creation :)

put a temp gauge on it.

 

[EventHorizan]

? I'm confused. Feeding is a breeze I've had no problems. Got a 27 gal Rez. Will be more than enough.
I barely do anything in there. Most of my time in there is just looking at them Lol. Just left stupid timer on ON not AUTO. lol.

try to spot nanners on all of them i mean.. Trying to see all in the middle.

 

[EventHorizan]

lol trying to lean all over the top, crawl underneath,
remove every plant from the tent because you see a nanner on the one in the very back.
15 mins later you get back to it,
and its just a shadow :)
The struggle is real!

 

[Thejoeybrown]

try to spot nanners on all of them i mean.. Trying to see all in the middle.

Ahhhh got ya.
Yes definitely a little more work than just a couple. Luckily in order to make all my 20 water lines not knock ito any plants and get in the way I have them spaced pretty nice.
Gotta get down there but luckily I'm still young enough. Hahah. But it's not as bad as it looks. I can get to them all fairly easily lol
Not too wild in there. They'll have more space as we cull males as well

 

[Thejoeybrown]

lol trying to lean all over the top, crawl underneath,
remove every plant from the tent because you see a nanner on the one in the very back.
15 mins later you get back to it,
and its just a shadow :)
The struggle is real!

That's why I was sure to leave walking space around the whole area. Also why I like havin the big room for flower. I think I'm gonna get a tent to use just for vegging.
Have 6 vegging in a tent and 12 flowering at staggered times at all times. Once I find my phenos and have clone runs

 

[MW7945]

put a temp gauge on it.

I feel as though it could be skewed though. Thus far there's zero heat problems but i'm only running at about 45% power. I just figured if I did that it'd be reading temps of the actual internals of the light. Or is that what you're referring to?

 

[MW7945]

I'm running about 450 umol's so hopefully that's good for now

 

[Wisher619]

I'm running about 450 umol's so hopefully that's good for now

so I would run it @50% at 36" above the top of you plants
in a few days bump to 75%
in a few more 100%
then from 36"-24" above canopy
then 18"
and that is where it should stay until harvest
if the plants grow closer so be it

that has always worked for me

nice lookin light

who made it for you?


odd configuration with the driver
but cool non the less

 

[EventHorizan]

I feel as though it could be skewed though. Thus far there's zero heat problems but i'm only running at about 45% power. I just figured if I did that it'd be reading temps of the actual internals of the light. Or is that what you're referring to?

well u can put a digital laser temp gauge aiming straight down on the middle of the canopy so you can find your perfect light height for your specific light.

 

[MW7945]

so I would run it @50% at 36" above the top of you plants
in a few days bump to 75%
in a few more 100%
then from 36"-24" above canopy
then 18"
and that is where it should stay until harvest
if the plants grow closer so be it

that has always worked for me

nice lookin light

who made it for you?

odd configuration with the driver
but cool non the less

I'll give that a go. I had my tape measure in there earlier today and I can't find the damn thing now :/

Company in China made it for me though. Took a month to get here but that's what I get for requesting changes custom things I suppose.

Honestly I thought the driver setup was odd too, and I probably would've preferred two drivers running 3 lights each, but. Thing packs a punch. Not a cheap driver that's for sure. Drivers are where my knowledge hits a wall though. So many to choose from.

well u can put a digital laser temp gauge aiming straight down on the middle of the canopy so you can find your perfect light height for your specific light.

So, essentially it'd be reading the surface temp of the plants? Would be cool to do multiple lasers that averaged out, but that sounds expensive

 

[Thejoeybrown]

Uses a MeanWell HLG-600H-36B driver. Hoping to get a hell of a harvest out of this thing :D

I'm in a 3x3x6 tent right now but I'm thinking I need to get a 4x4 to get the most out of this light. Thoughts on that?

Had them add a power meter to this thing as well. Does live watts, amps, volts, and kWh.

Again, not shilling just sharing my creation :)

Looks sweet

 

[EventHorizan]

I'll give that a go. I had my tape measure in there earlier today and I can't find the damn thing now :/

Company in China made it for me though. Took a month to get here but that's what I get for requesting changes custom things I suppose.

Honestly I thought the driver setup was odd too, and I probably would've preferred two drivers running 3 lights each, but. Thing packs a punch. Not a cheap driver that's for sure. Drivers are where my knowledge hits a wall though. So many to choose from.



So, essentially it'd be reading the surface temp of the plants? Would be cool to do multiple lasers that averaged out, but that sounds expensive

Source it from china for prob 3 a mater.
The hottest is prob directly under the light...

 

[Thejoeybrown]

I'll give that a go. I had my tape measure in there earlier today and I can't find the damn thing now :/

Company in China made it for me though. Took a month to get here but that's what I get for requesting changes custom things I suppose.

Honestly I thought the driver setup was odd too, and I probably would've preferred two drivers running 3 lights each, but. Thing packs a punch. Not a cheap driver that's for sure. Drivers are where my knowledge hits a wall though. So many to choose from.



So, essentially it'd be reading the surface temp of the plants? Would be cool to do multiple lasers that averaged out, but that sounds expensive

You can get a laser temp gun and point it anywhere you want. I use one and check all over the canopy till I find the perfect temp. I try to keep them around 68f surface temp of the top canopy leaves which is around 73f ambient temp

 

[MW7945]

I know you can probably find the guns cheap, but as far as just the sensor/readout standalone you'd probably have to talk to a company and just ask if you can buy the sensor/readout part

Right now i'm at 36" at about 50% power (drawing like 220w) and the PAR is 350 on the plants. We'll see how it goes I guess

 

[MW7945]

On the top layer of the coco my perlite is definitely getting either algae or something on it as well. It's all turning green. And yesterday there was some crud or some shit on top of the coco as well. Like brown goo O_O

Up the Hydroguard?