D
devo6786
- 20
- 3
There is a 8"x10" intake at the bottom right corner. Temps are between 72 at the low and 82 at the high end. Pretty close to ambient room temp. I can't really take the light and filter out because I have to be semi-stealth. Smell is my main concern. Ill see how this round goes and increase overhead next time.
Why should I remove the pre-filter? I thought it was good to keep it on for dust issues?
Why should I remove the pre-filter? I thought it was good to keep it on for dust issues?
Cut a hole on top of your cabinet, an inch smaller what the light measures, and place the light on top of the cabinet. Move the filter outside of the box and have the vent pushing through it instead of sucking. This way youll gain overhead and space and you'll get the heat source out of your enclosre. Intakes at the bottom will pick the coldest air in the room and your temp in the cabinet should be really close to that. Put some filters on the intake too, so the dust, sucked from the floor, doesn't get pushed inside of the filter. Also remove the pre-filter on your carbon filter.