Log In Register

Whats wrong with my plnts

  • Thread starter Thread starter Hippiechicken
  • Start date Start date
  • Tagged users Tagged users None

Whats wrong with my plnts

Hippiechicken 18 Replies 1,405 Views
Page 1 of 1 · Replies 1–19 of 19
1
Hippiechicken

Hippiechicken

Posts
24
Reactions
14
Joined
Feb 24, 2020
Points
3
Whats wrong with my leaves? My ph is 6 and ppm between 350-400. Ive raised the light as high as i can, about 4 ft from plant, was running 2 ft from plant
 

Attachments

  • whats-wrong-with-my-plnts.jpg
    whats-wrong-with-my-plnts.jpg
    356.4 KB · Views: 88
  • whats-wrong-with-my-plnts-2.jpg
    whats-wrong-with-my-plnts-2.jpg
    386.3 KB · Views: 77
  • whats-wrong-with-my-plnts-3.jpg
    whats-wrong-with-my-plnts-3.jpg
    370.5 KB · Views: 75
  • whats-wrong-with-my-plnts-4.jpg
    whats-wrong-with-my-plnts-4.jpg
    331.3 KB · Views: 85
Whats wrong with my leaves? My ph is 6 and ppm between 350-400. Ive raised the light as high as i can, about 4 ft from plant, was running 2 ft from plant
looks like it could use a bit of nitrogen..
if you google
marijuana leaf problems, you will see a chart with leaves and all the excesses and deficiencies for you to compare too.
other members will help out too😁
 
You must have something else besides a lack of nitrogen. I assume you have 3 or 4 plants? Second picture looks to have some nutrient burn. Third picture looks like the plant is in need of nitrogen. Forth picture looks like more of picture #2.
The light does not appear to be an issue. I am not a hydro/DWC grower but you might have the PPM's a little high. Are you using any cal mag?
 
No to the cal mag and i wondered about my nutes so i changed the water and brought my ppm down. Should i get the cal mag and lower my lights back down a little
 
No to the cal mag and i wondered about my nutes so i changed the water and brought my ppm down. Should i get the cal mag and lower my lights back down a little

You will need cal mag unless your nutrients have those elements in the mix. Also the light can be lowered. What is the light? If LED is it a Chinese brand?
 
This is what i use
 

Attachments

  • 15825925162617681964042328794078.jpg
    15825925162617681964042328794078.jpg
    172.1 KB · Views: 69
  • 1582592531783350907360384390957.jpg
    1582592531783350907360384390957.jpg
    198.4 KB · Views: 76
This is what i use
That is a veg booster, meaning it is meant to be added to an existing nutrient system to promote additional growth. If you have the cash just get a simple 3 part like nutrient line for the entire grow. You just change the amount of each solution for the stage of the plants life. This will get you going in the correct direction and maybe after this grow you can step up to a more advanced nutrient line. It just gets to be a pain because you can have like 12 different products for the stages of the plants life if you want to really push the plant!
 
That is a veg booster, meaning it is meant to be added to an existing nutrient system to promote additional growth. If you have the cash just get a simple 3 part like nutrient line for the entire grow. You just change the amount of each solution for the stage of the plants life. This will get you going in the correct direction and maybe after this grow you can step up to a more advanced nutrient line. It just gets to be a pain because you can have like 12 different products for the stages of the plants life if you want to really push the plant!
i concur!!
 
Also, more than likely you have locked out the plants. Meaning they are not going to take up any nutrients for a few days. I would recommend you change the res water again to just plain PHd water with no nutrients.
 
This to lower my ph when needed.
 

Attachments

  • 1582593749154167117503394861890.jpg
    1582593749154167117503394861890.jpg
    136.8 KB · Views: 70
so just plain water with a ph of 6 right? My tap water runs at about 7-8
 
so just plain water with a ph of 6 right? My tap water runs at about 7-8
True Hydro guys shoot for a PH of 5.8 so just plain water and PH for at least 3 days or until they look really hungry. The plant in your third picture is hungry. You can run the same exact nutrient PPM's with a strain and some plants will do better than others. If you have multiple strains that is why that plant looks better. More than likely that third plant will be the best producer.
 
Your humidity is pretty low. Also, it's hard to tell, but it looks like there might be some insect damage on the first and also the last picture, especially on the lower leaves.
 
Last edited:
True Hydro guys shoot for a PH of 5.8 so just plain water and PH for at least 3 days or until they look really hungry. The plant in your third picture is hungry. You can run the same exact nutrient PPM's with a strain and some plants will do better than others. If you have multiple strains that is why that plant looks better. More than likely that third plant will be the best producer.
So i went to the grow shop yesterday and got all this. I was told the same thing as on here. Now im confused about my ppm. Yesterday i ran just plain tap water with the cal mag and this morning my ppm was 742. How do i bring it down to the number its supposed to be?
 

Attachments

  • 15827154334925912561701881714883.jpg
    15827154334925912561701881714883.jpg
    206.7 KB · Views: 61
  • 15827154722253011951866296086621.jpg
    15827154722253011951866296086621.jpg
    145.6 KB · Views: 53
  • 15827155093135411639148872844474.jpg
    15827155093135411639148872844474.jpg
    179.3 KB · Views: 60
  • 15827155241304115691183756860497.jpg
    15827155241304115691183756860497.jpg
    153.4 KB · Views: 70
Page 1 of 1 · Replies 1–19 of 19
1
Back
Top Bottom