Pipecarvers Spider Farms SF1000 grow

  • Thread starter PipeCarver
  • Start date
  • Tagged users None
PipeCarver

PipeCarver

Supporter
5,643
313
I have a new SF1000 I'm going to be trying out. I'll post here a couple times a week with updates.
I had to build an enclosure for this new light and it ended up being larger than the 2'x2' area recommended it's 30" x 47" with a max light height of 47".

I have 4 Bubble Bomb clones under it now at 100% 24" away from the top leaves giving me a lux of 9,000. That seems a bit low... My first time with led lights I don't want to fry them but I can keep my plants under t5 lights up to 20,000 within a few inches of the lamps without harm, in fact they grow great that close. Learning curve.

I intend on keeping only 1 BB under this light through flower and keep it short and wide to fill at least 4 sq ft. The rest I'll be putting in my other veg room when my current harvest has dried.
 
Pipecarvers spider farms sf1000 grow
Pipecarvers spider farms sf1000 grow 2
Pipecarvers spider farms sf1000 grow 3
Pipecarvers spider farms sf1000 grow 4
Pipecarvers spider farms sf1000 grow 5
Pipecarvers spider farms sf1000 grow 6
Pipecarvers spider farms sf1000 grow 7
Pipecarvers spider farms sf1000 grow 8
Pipecarvers spider farms sf1000 grow 9
Pipecarvers spider farms sf1000 grow 10
Pipecarvers spider farms sf1000 grow 11
PipeCarver

PipeCarver

Supporter
5,643
313
how do you keep the plants "short and wide" i topped my ones but they still grew so friggn big
Top and train, although I'm used to t5 lights and I can keep the lamps right on top of the plants within an inch or 2 when they're small a few inches as they grow more and faster. I'm not sure how it'll work with this light as I've heard I can't keep them as close. We'll see.
 
ImpulsiveGrower

ImpulsiveGrower

Supporter
2,081
263
how do you keep the plants "short and wide" i topped my ones but they still grew so friggn big
Top your plants and the tie the 2 new tops down along with the other side branches. Leave the ties in place for few weeks and you will have bushes just like these 2 OG Kush. Leaving the ties in place as the plant grew only helped straighten out the branches even more and when I finally took the ties off my branches look like the ones in the pic below and they keep their shape.
EF994492 AD35 45B0 8A2E A7D5C99CA18B
15DD85BE C433 4DA9 85BE A1946236ECE5
E58E3AA0 FF72 47EF AD2A F1C1CC9C99A8
 
Shayne010944

Shayne010944

1,002
113
Top your plants and the tie the 2 new tops down along with the other side branches. Leave the ties in place for few weeks and you will have bushes just like these 2 OG Kush. Leaving the ties in place as the plant grew only helped straighten out the branches even more and when I finally took the ties off my branches look like the ones in the pic below and they keep their shape.View attachment 1169615View attachment 1169616ahh
 
Shayne010944

Shayne010944

1,002
113
Top your plants and the tie the 2 new tops down along with the other side branches. Leave the ties in place for few weeks and you will have bushes just like these 2 OG Kush. Leaving the ties in place as the plant grew only helped straighten out the branches even more and when I finally took the ties off my branches look like the ones in the pic below and they keep their shape.View attachment 1169615View attachment 1169616View attachment 1169617
ahh i get you , so its kind of like doing a manifold
 
PipeCarver

PipeCarver

Supporter
5,643
313
Top and train, although I'm used to t5 lights and I can keep the lamps right on top of the plants within an inch or 2 when they're small a few inches as they grow more and faster. I'm not sure how it'll work with this light as I've heard I can't keep them as close. We'll see!

After 1 day at 24" above sitting at 9,000 lux I dropped the light to 18" & put the driver at 90% for 13,000 lux I'll see how it takes that tomorrow and maybe increase the lux again.
 
100 5877
PipeCarver

PipeCarver

Supporter
5,643
313
After 1 day at 24" above sitting at 9,000 lux I dropped the light to 18" & put the driver at 90% for 13,000 lux I'll see how it takes that tomorrow and maybe increase the lux again.
Sept 19 I lowered the light again to 13" above and now the lux is around 20,000 on top leaves. I topped 3 of the 4. One of the segments was too short to cut, I like to leave a small stump below my cuts. I'll get it tonight / tomorrow.
 
100 5890
Moshmen

Moshmen

8,218
313
Sept 19 I lowered the light again to 13" above and now the lux is around 20,000 on top leaves. I topped 3 of the 4. One of the segments was too short to cut, I like to leave a small stump below my cuts. I'll get it tonight / tomorrow.
Lookin good over there in Novia Scotia ! 10”-12” or so is where I end up - I’ve found you get to close I start to light bleach the plants /fry trichs in late flower
 
PipeCarver

PipeCarver

Supporter
5,643
313
Sept 19 I lowered the light again to 13" above and now the lux is around 20,000 on top leaves. I topped 3 of the 4. One of the segments was too short to cut, I like to leave a small stump below my cuts. I'll get it tonight / tomorrow.
I have to apologize to Spider Farmer for sponsoring me with this new light and I can't even get their name right. Dyslexia or just old?

Sept 21 I have the light at 13" above the top leaves with a reading of 23,000 lux @ 90% power growing well. I'll be leaving one plant in this room and move 3 into my larger veg room where I have my last harvest hanging with 2 getting 60hrs of dark before I cut them.
 
100 5894
100 5893
100 5911
100 5912
a4twenty

a4twenty

95
33
under it now at 100% 24" away from the top leaves giving me a lux of 9,000. That seems a bit low... My first time with led lights I don't want to fry them but I can keep my plants under t5 lights up to 20,000 within a few inches of the lamps without harm, in fact they grow great that close.
does your lux meter do LED lights?

mine specifically says it does not
 
PipeCarver

PipeCarver

Supporter
5,643
313
  • 51Isw3vDTZL._SX385_.jpg
Roll over image to zoom in




AS803 Digital Illuminance Light Meter,Measure Lights 1~200.000lux with 180?Rotated for Plants LED Lights Indoor Outdoor Light Tester​

does your lux meter do LED lights?

mine specifically says it does not
lol I don't know I'll have to read up on it I guess, it gives me numbers that look consistent with my t5's #s . I didn't know that some meters do and some don't.......edit yes it does
 
Last edited:
a4twenty

a4twenty

95
33
when i looked around online i couldn't find the info anywhere. though it did say LED backlight.

do you have a friend close by that you could compare with?

when i bought my meter there were definitely conventional and LED versions available.
 
PipeCarver

PipeCarver

Supporter
5,643
313
lol I don't know I'll have to read up on it I guess, it gives me numbers that look consistent with my t5's #s . I didn't know that some meters do and some don't.......edit yes it does
Sept 25 update, I'm getting good growth this week after I topped her. I fed 3ml Si/ 3ml Micro/3mlGrow/3mlBloom + 1 ml up. I have the light 13" away and I got Lux readings around 28,000. now at 80%. I've noticed her turning purple, I'll lift the light So I get below 25,000. Somewhere in my grey brain I read vegging plants don't need more than 25,000 lux to grow well. I topped her last week as well so the combination of transplanting,topping & having the light a bit to low added too much stress to this girl making her unhappy so she's turning purple as a complaint......Sorry Baby I'll be gentle this week😙😙
 
100 5916
100 5919
100 5920
PipeCarver

PipeCarver

Supporter
5,643
313
Sept 25 update, I'm getting good growth this week after I topped her. I fed 3ml Si/ 3ml Micro/3mlGrow/3mlBloom + 1 ml up. I have the light 13" away and I got Lux readings around 28,000. now at 80%. I've noticed her turning purple, I'll lift the light So I get below 25,000. Somewhere in my grey brain I read vegging plants don't need more than 25,000 lux to grow well. I topped her last week as well so the combination of transplanting,topping & having the light a bit to low added too much stress to this girl making her unhappy so she's turning purple as a complaint......Sorry Baby I'll be gentle this week😙😙
This light is recommended in a 2' x 2 ' tent...I built a space for it at 3' x 4' because of build convenience. being a bit too large I didn't get the reflection off the sides very well. So I built two - 2' x 2' x 3' hinged panda plastic panels to tighten the space.up.
 
100 5924
100 5925
100 5927
PipeCarver

PipeCarver

Supporter
5,643
313
Ya thanks it fits in well with my other rooms / spaces
Sept 29 update
The light is preforming well, I now have it turned to about 65% @ 24,000 lux 12" from the light. I've been moving 3 other clones from this box into my veg room daily for 10-11 hrs per day but not the Bubble Bomb I've labelled BB led. It's staying under the SF1000 through out her grow. I'd like to split her at least once or twice more before I flip her. I'll need to transplant soon into 3 gallon pots.
 
100 5935
100 5936
Frankster

Frankster

Never trust a doctor who's plants have died.
Supporter
5,188
313
lol I don't know I'll have to read up on it I guess, it gives me numbers that look consistent with my t5's #s . I didn't know that some meters do and some don't.......edit yes it does
take it with a grain of salt bro, there's also ones you can get on your cellphone out there. If you got a good phone with a decent sensor, it might be useful also. Light has a lot to do with spectrums, so the meters need to be programmed for the spectral wavelengths. Most meters are geared toward whiter/blue lights, not reds, so keep that in mind. Blue/green/yellow is only part of wavelength on those LED's, they are far more dialed in.

Don't be afraid to dial that light down a bit on the plants, once there hardened. Depending on how many you got under the light. Plants are looking fine, congrats bro, enjoy the ride.😁


I would suggest doing some training. Find a spot where the plant can be bent down, while dodging any of the upcoming shoots, Then drill a hole in that spot. Take some light wire or twine for tiedown. Mash your stem internodes about 2-3 internodes down, find a space you and pinch, then bend over.

All your undershoots will then develop. Make sure the top is level, or lower than the shoots, cause it will come back up on it's own. Here's some examples of my second round of training.
 
IMG 20210929 170702
Last edited:
Frankster

Frankster

Never trust a doctor who's plants have died.
Supporter
5,188
313
See how many bends, allowing those bottom shoots to move up, then pulling down the top again. Never losing anything.

You might be best served by simply letting them only develop a few nodes, depending on how much light you can give any one plant, but certainly, it increases the budding sites.

Don't be afraid to remove some strategic fans either, to simply get some light to some sprouts underneath, there's more than one way to skin a cat bro.


IMG 20210929 171248
IMG 20210929 171311
 
Top Bottom