do your dehumidifier freeze too ?

[Anthem]

well this is my reading after a night with the dehumidifier set at 55 rh , i also washed off the temp/rh probe with alcohol also put a brand new ac infinity carbon filter on the exhaust fan
the screenshot is weather . com at the same time pics were taken
View attachment 1173794View attachment 1173795View attachment 1173796

Program the fan to run 24/7

 

[biggerbud420]

there is a continuous feature on it but it automatically sets the rh to 50

 

[Aqua Man]

Where is your humidity probe?

Shut the AC off for a day. Remember RH is relative humidity. Relative to temp.

What's the temp set to for the AC?

 

[biggerbud420]

Where is your humidity probe?

Shut the AC off for a day. Remember RH is relative humidity. Relative to temp.

What's the temp set to for the AC?

 

[biggerbud420]

Where is your humidity probe?

Shut the AC off for a day. Remember RH is relative humidity. Relative to temp.

What's the temp set to for the AC?

turn the ac off it will get to hot in there

 

[Aqua Man]

turn the ac off it will get to hot in there

The humidity makes perfect sense with that placement. The humid air from transpiration is moving up and out so of course it will be higher and your temp and humidity sensor should be at or just below canopy level OUT of the light.

 

[biggerbud420]

if there was no ac temps with lights on would be in the 90's and it would be in the 80's with lights off i know i heard on here those are not good temps

 

[biggerbud420]

The humidity makes perfect sense with that placement. The humid air from transpiration is moving up and out so of course it will be higher and your temp and humidity sensor should be at or just below canopy level OUT of the light.

so would be place it for it to be is right under the nets ?

 

[Aqua Man]

Change the humidity settings g on the dehuey to 55-60 on continuous operation or the thi g will run non-stop.

This is why controllers are used and probe placement is important.

Those AC and dehumidifiers take readings internally and are far less accurate.

 

[biggerbud420]

overall how are my temps and rh ?

 

[Aqua Man]

This is not an easy thing to fix when not using controllers and probes you can properly space.

 

[Aqua Man]

overall how are my temps and rh ?

Well I can't say cause your reading are from a probe improperly placed.

It's not room temls that matter anyhow. It's leaf temps.

 

[Aqua Man]

Eg for temp... then look for rh on the net. Back to work for me.

 

[biggerbud420]

Change the humidity settings g on the dehuey to 55-60 on continuous operation or the thi g will run non-stop.

This is why controllers are used and probe placement is important.

Those AC and dehumidifiers take readings internally and are far less accurat

in continous mode i can not set the rh level

 

[Aqua Man]

in continous mode i can not set the rh level
View attachment 1173811

You can if it's hooked up to a controller.

 

[biggerbud420]

just wanted to update i have had no freezing problems since the post i think the problem was i was working the unit to hard

 

[Aqua Man]

just wanted to update i have had no freezing problems since the post i think the problem was i was working the unit to hard

Yeah 50% and below is hard on them.

 

[strainguy]

Thats not normal for sure... might be something working not as it should... very strange

 

[biggerbud420]

Thats not normal for sure... might be something working not as it should... very strange

i had the rh set so low it would never cut off that somehow is why it was freezing up now it comes on for a few mins then goes off for a few mins no freezing since i posted

 

[biggerbud420]

well the damn thing froze up again it seems to do it when it gets really cold in the room