Heywood
- 600
- 143
.
As the title states, this was just fun to figure out a creative DIY way to press some hash in smaller quantities.
I'm sure there are better/easier ways... but again... this was just for fun.
For me this works great for doing 1 or 2 gram pucks.
I think this all started because back on my first grow way back when, I found that a nickel fits perfectly inside a ½" PVC coupler.
There is a ridge half way down inside that coupler that the nickel is sitting on.
This is where that loose nickel will need to be for this to work.
So this is everything that was needed, plus another nickel and also either Gorilla super glue or JB weld. I like JB Weld better.
The size of the bolt doesn't matter. The head just can't be a bigger diameter than the nickel, but you want a beefy bolt.
Then you either super glue or JB weld the head of the bolt to the nickel and let it dry/cure overnight.
This is one with JB Weld and one with super glue. You don't need to make 2 of them, but I did just in case one came loose.
So then of course you need to gather up your kief. I use a 220 micron bag and dry ice to extract the kief from my trim and popcorn/smaller buds.
Then I measure out (scale) whatever weight I want the pucks to be. I usually do 2-gram pucks. Put the kief onto a piece of paper and funnel it into the PVC coupler, which has the loose nickel already in place resting on the ridge, of course . I put a very light coating of olive oil on the face of the plunger nickel, then wipe it off so the kief doesn't stick.Then use one of the plungers that was made and put it on top of the kief and compress it however you feel like. I've done it both simply by hammering it down and also by placing this unit in a vice and cranking it down. Keeping in mind that the coupler is plastic and that ridge isn't huge. But I've had no issue. After it is compressed, I pull out the plunger and flip it around and push out the nickel and hash puck from the other end.
This is the finished product, which stores perfectly inside these plastic nickel-sized containers that my local hydroponic shop sells.
As the title states, this was just fun to figure out a creative DIY way to press some hash in smaller quantities.
I'm sure there are better/easier ways... but again... this was just for fun.
For me this works great for doing 1 or 2 gram pucks.
I think this all started because back on my first grow way back when, I found that a nickel fits perfectly inside a ½" PVC coupler.
There is a ridge half way down inside that coupler that the nickel is sitting on.
This is where that loose nickel will need to be for this to work.
So this is everything that was needed, plus another nickel and also either Gorilla super glue or JB weld. I like JB Weld better.
The size of the bolt doesn't matter. The head just can't be a bigger diameter than the nickel, but you want a beefy bolt.
Then you either super glue or JB weld the head of the bolt to the nickel and let it dry/cure overnight.
This is one with JB Weld and one with super glue. You don't need to make 2 of them, but I did just in case one came loose.
So then of course you need to gather up your kief. I use a 220 micron bag and dry ice to extract the kief from my trim and popcorn/smaller buds.
Then I measure out (scale) whatever weight I want the pucks to be. I usually do 2-gram pucks. Put the kief onto a piece of paper and funnel it into the PVC coupler, which has the loose nickel already in place resting on the ridge, of course . I put a very light coating of olive oil on the face of the plunger nickel, then wipe it off so the kief doesn't stick.Then use one of the plungers that was made and put it on top of the kief and compress it however you feel like. I've done it both simply by hammering it down and also by placing this unit in a vice and cranking it down. Keeping in mind that the coupler is plastic and that ridge isn't huge. But I've had no issue. After it is compressed, I pull out the plunger and flip it around and push out the nickel and hash puck from the other end.
This is the finished product, which stores perfectly inside these plastic nickel-sized containers that my local hydroponic shop sells.