Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

Anyone know of a good thread on how to make seeds? What kind? Shanti baba has tons of stuff out there on breeding genetics, seed making ect. He deals mostly in landrace strains but the info still applies…
Home Forums Medical Cannabis Cultivation Grow Diaries THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
0
Images
Discussion below · 95,543 replies
Page 43 of 4778 · Replies 841–860 of 95,544
Status
Not open for further replies.
Anyone know of a good thread on how to make seeds?
What kind? Shanti baba has tons of stuff out there on breeding genetics, seed making ect. He deals mostly in landrace strains but the info still applies…
 
I just wanted to make my own seeds, wanted some info on the "right" way to do them indoors
Fems I assume? Well, I would use two 2x2 tents, starting with stable seeds. High quality genetics. A plant in each tent, then right at the switch, I ramp up the temp a few degrees, nothing crazy, and rh at 10-15 points and maintain that in one tent until you coax out pollen sacs. Then I take a few artist brushes and load them with pollen. Go to the other tent and apply to the pollen to that lady, I usually put the pollen pretty low on the stalk, I try to save the colas, then I simply let the plant I applied pollen to get over ripe for a week or two depending. I do it like this to ensure I know exactly what caused the hermi in the first place, so when you get your seeds finally you already know what not to do. It has worked well for me. Or you can just let the plant go over ripe and a harsh environment to stress the piss out of them.then it can get it’s a sexual freak on. I choose option a, it’s cleaner and less stressful all around.
 
anyone ever have a shower when the electric hot water heater done went KABOOM with an electrical short?
 

Attachments

  • 20230706_112932_HDR.jpg
    20230706_112932_HDR.jpg
    89.5 KB · Views: 15
  • 20230706_112949_HDR.jpg
    20230706_112949_HDR.jpg
    110 KB · Views: 18
  • 20230706_122808_HDR.jpg
    20230706_122808_HDR.jpg
    180.4 KB · Views: 17
anyone ever have a shower when the electric hot water heater done went KABOOM with an electrical short?
Well, I can tell you that tank is in real bad shape, besides the electrical issue, it seems the inner tank has gone bad, that what all that rusty water is, most likely a split in the tank leaked on the electrical and caused a short. I’m super glad you are ok. It coulda been bad homie. Also, when you see rust like that, it’s more than likely you will drain that tank, but it will still feel full. Because most likely It is, with hardened calcium.
 
Well, I can tell you that tank is in real bad shape, besides the electrical issue, it seems the inner tank has gone bad, that what all that rusty water is, most likely a split in the tank leaked on the electrical and caused a short. I’m super glad you are ok. It coulda been bad homie. Also, when you see rust like that, it’s more than likely you will drain that tank, but it will still feel full. Because most likely It is, with hardened calcium.
yeah it's toast and already been replaced.
still under warranty much to my surprise.
still have 18 months of coverage but still have to pay several hundred for the plumber which pisses me of because i can easily do it myself but i don't have a ticket and i can't get warranty if i do it.

any of you guys old enough to remember when shit used to last?
 
yeah it's toast and already been replaced.
still under warranty much to my surprise.
still have 18 months of coverage but still have to pay several hundred for the plumber which pisses me of because i can easily do it myself but i don't have a ticket and i can't get warranty if i do it.

any of you guys old enough to remember when shit used to last?
Yep. Ain’t nothing made like it used to be.
 
yeah it's toast and already been replaced.
still under warranty much to my surprise.
still have 18 months of coverage but still have to pay several hundred for the plumber which pisses me of because i can easily do it myself but i don't have a ticket and i can't get warranty if i do it.

any of you guys old enough to remember when shit used to last?
Hell yea I do. I’m in my early 50’s. I do not recognize what these future generations are doing.

That’s what happens tho, right?

Old folks get out of the way whether thy like it or not. 🤷‍♂️
 
any of you guys old enough to remember when shit used to last?

Yep and that's why I will never, ever buy a newer car than '01 for the rest of my life. I don't care; if they ban gas cars I'll ride a horse. Besides, financing a car is about the dumbest thing you can do in my humble opinion. . . If you can't afford to pay cash for it, you can't afford it.
 
Yep and that's why I will never, ever buy a newer car than '01 for the rest of my life. I don't care; if they ban gas cars I'll ride a horse. Besides, financing a car is about the dumbest thing you can do in my humble opinion. . . If you can't afford to pay cash for it, you can't afford it.
I have an 05 GT stick mustang, sure I coulda bought a newer one, but the 05, I just fell in love with that body style when it first came out, I found it with 11,000 miles on it, garage kept, 12,000 cash. That’s the newest car, I’ll ever buy. It’s getting a big block Chevy at some point, there’s nothing to the car except a light chassis a simple cpu and power windows, it’s leather but that’s where the fancy stops. It’s just a fun little car. I haven’t a single issue with it in 8 years. Because it’s basically an 99-05 mustang with a waaaay nicer body. I’m a sucker for fast backs……
 
Just thought about this, I have an old steel dewalt jigsaw, it’s a 1960’s model. Back in 17, when my house got flooded from hurricane Harvey, (Jesus, been through a ton but this was different.my grow got demolished) I went to my tool cabinet, and that jig saw was in its case, full of water, I opened that sucker up, let it dry out, put it back together. I still have that thing. Works like a top. Every other tool in my cabinet got ruined. Because they were tools made from the 80’s and up mostly. All that stuff died. It’s just a jigsaw, but it’s probably one of the coolest tools I have. It’s a true survivor…..
 
Just thought about this, I have an old steel dewalt jigsaw, it’s a 1960’s model. Back in 17, when my house got flooded from hurricane Harvey, (Jesus, been through a ton but this was different.my grow got demolished) I went to my tool cabinet, and that jig saw was in its case, full of water, I opened that sucker up, let it dry out, put it back together. I still have that thing. Works like a top. Every other tool in my cabinet got ruined. Because they were tools made from the 80’s and up mostly. All that stuff died. It’s just a jigsaw, but it’s probably one of the coolest tools I have. It’s a true survivor…..
Wow you ain't lieing because almost everything made in this Era was not built to last. IMHO it was the drugs 🤣 once crack hit the street. Every manufacturer has employees that were not at their best. Engineers completely blasted hell it was a wild. People were out there that got the double 😳 crack and aids. That's when our jobs started moving overseas.
 
Wow you ain't lieing because almost everything made in this Era was not built to last. IMHO it was the drugs 🤣 once crack hit the street. Every manufacturer has employees that were not at their best. Engineers completely blasted hell it was a wild. People were out there that got the double 😳 crack and aids. That's when our jobs started moving overseas.
Well I know what I was up too in the 80’s, I was busy being a punk rock degenerate. Pabst blue ribbon acid and weed. Philly was a damned mess when that crack shit happened. It’s like the city never really got past that part of life. It’s still pervasive, anytime I’m up there, or fly in, the immediate reaction is always the same, “these damned crackheads are fucking everything up.” Shit hasn’t changed in 40 years. People spell things in cyclone fences by wadding up trash and sticking in between the chain link. You know things like “live happy” or “city of brotherly love” spelled out in chips bags styrofoam cups and beer cans.
Really beautiful stuff let me tell you 🤣😂🤣😂
 
Wow you ain't lieing because almost everything made in this Era was not built to last. IMHO it was the drugs 🤣 once crack hit the street. Every manufacturer has employees that were not at their best. Engineers completely blasted hell it was a wild. People were out there that got the double 😳 crack and aids. That's when our jobs started moving overseas.
Don't forget planned obsolescence and planned failures. Gotta keep em coming back (that's what they think, at least... I just run the other way).

Nobody takes pride in their work much these days.
 
What kind? Shanti baba has tons of stuff out there on breeding genetics, seed making ect. He deals mostly in landrace strains but the info still applies…

What day should I put the pollen on females? Plan to make regular seeds first.
 
What day should I put the pollen on females? Plan to make regular seeds first.
Well, beginning of week 3 flower is when I usually do it, that way there is plenty of time for the seeds to mature. but when it comes to regs, I haven’t ever really bred them, I always sexed and trashed males like a fool instead of harvesting pollen and saving it to use. Now, @Harpua is a breeder of regs. His methodology seems really tight and easy. I plan to get into breeding them as well, still waiting on a pack of seeds from 86 to come in, I plan on hunting through those and do my fist legit reg breeding….and I plan on harassing @Harpua about it. you may want to knock up over there and see what he can tell you. Everything I would be saying past sexing the plants, would be applied knowledge and learning the hard way I fear.
 
Status
Not open for further replies.
Page 43 of 4778 · Replies 841–860 of 95,544
Back
Top Bottom