Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

I even have a song to go with Carly.... I had it done and fed it to AI because it's style of notation is great even if I write it all. Style: Caribbean Funk / Reggae Groove Verses: Paul Simon–style narrative, playful imagery, storytelling tone Choruses...
Home Forums Medical Cannabis Cultivation Grow Diaries THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
0
Images
Discussion below · 95,543 replies
Page 3911 of 4778 · Replies 78,201–78,220 of 95,544
Status
Not open for further replies.
I even have a song to go with Carly.... I had it done and fed it to AI because it's style of notation is great even if I write it all.
Style: Caribbean Funk / Reggae Groove


  • Verses: Paul Simon–style narrative, playful imagery, storytelling tone
  • Choruses: Deep island folk reggae — grounded, hypnotic, heavy rhythmic drive

Tempo/Feel: Midtempo, syncopated skank, dirty funky rhythm section with clavinet stabs + wah guitar


Intro:
| Gm7 | C9 | Gm7 | D7 |


Verse 1 (Paul Simon style):
Gm7 – Early morning / C9 – Sun climbing high
Gm7 – Steam on the pavement / D7 – Rhythm never die
Gm7 – Street full of colors / C9 – Vendors cryin’ loud
Gm7 – Carly in the alley / D7 – Mixin’ with the crowd


Pre-Chorus:
Cm7 – Hear that conga / F9 – Bouncin’ down the line
Gm7 – No, Carly baby, (spoken) RUSH (ROOS)
D7 – got to make it on time


Chorus (Island folk reggae):
Gm7 – Churn it, honey / C9 – spin like your feet is on fire
Gm7 – Move it, darling / D7 – bass gonna take you higher
Gm7 – Churn it, honey / C9 – sweat like the tropical rain
Gm7 – Spin like fire / D7 – roll like sugarcane


Verse 2 (Paul Simon style):
Gm7 – Taxi man shouting / C9 – steelpan starts to play
Gm7 – Carly’s in a hurry / D7 – got no time to stay
Gm7 – Backstreet hustlers / C9 – drumming out the beat
Gm7 – Wind blowin’ four-time / D7 – sandal rub the street


Pre-Chorus 2:
Cm7 – Hear that riddim / F9 – jumping out the wire
Gm7 – No, Carly baby, (spoken) RUSH (ROOS)
D7 – spinning up through de fire


Chorus (repeat)


Bridge:

Am7 – Moonlight comin’ down / Dm7 – saxophone cryin’ blue
Gm7 – Island heartbeat / C9 – always pullin’ on you


Outro Chorus (fade w/ad libs)
 
6plmwk
4y246f
43BADCFD 983C 4810 A3FE FD6A98A55654
15e68e6252f5937a
FB IMG 1605233029705
 
Morning homies, rainy day, checkin out emails and smokin joints till the rain passes, lots of real estate on this desk wifes already usin it for stuff, but that’s fine lol wait till the big screens get here evenetually (if ever) theyll be the width of the desk (possibly hang over a few inches on each end)

hats a LG 34” ultrawide monitor, my plan would be 3 that width lol

Now to get the basement PC back up and running possibly as a home media server or something lol
 

Attachments

  • IMG_1808.jpeg
    IMG_1808.jpeg
    70.4 KB · Views: 3
  • IMG_1809.jpeg
    IMG_1809.jpeg
    92.3 KB · Views: 3
Hey train wreckers!
got a question this am. After morning transition I went back to my ACi app the old 69 pro with 4 bays.
For some reason the app data trace no longer populates. Screen lock is in use and the data os selected to populate
I just get this.
Screenshot 20250820 081935

but the thing is still keeping score and the thermoforge and the cloud forge still works fine.
Screenshot 20250820 082224

I did reset controller. I locked and unlocked all the screens.
It seems to be working the controls fine but it is not correct.
Any Ideas?
I was under the impression that the trace data was not held in the controller but was always loaded from ACI. I can not verify this but moving controls has always popped right up but the trace has always taken a while to populate. seems silly as I have seen CAB files stripped into asc and there is just not a lot of data space needed for these files.
Anyone gots any ideas?
 
Hey train wreckers!
got a question this am. After morning transition I went back to my ACi app the old 69 pro with 4 bays.
For some reason the app data trace no longer populates. Screen lock is in use and the data os selected to populate
I just get this.
View attachment 2504005
but the thing is still keeping score and the thermoforge and the cloud forge still works fine.
View attachment 2504006
I did reset controller. I locked and unlocked all the screens.
It seems to be working the controls fine but it is not correct.
Any Ideas?
I was under the impression that the trace data was not held in the controller but was always loaded from ACI. I can not verify this but moving controls has always popped right up but the trace has always taken a while to populate. seems silly as I have seen CAB files stripped into asc and there is just not a lot of data space needed for these files.
Anyone gots any ideas?
No idea on this one homie! Hopefully someone gets an answer to ya, building PC’s the past few days I found GROK very helpful with solving issues if your work with it and answer clearly
 
Doing Some watering, topped up all 3 pots with about a gallon and a half of fresh peat moss worked it and the cover crop down a bit then re sowed more white clover, gunna cycle it again before fall when I wanna get something running in em

Frostette is a beast already, she’s upper clean and net is full, just lettin her tops beef up a tad then she’s flipping
 

Attachments

  • IMG_1814.jpeg
    IMG_1814.jpeg
    182.4 KB · Views: 4
  • IMG_1821.jpeg
    IMG_1821.jpeg
    259.3 KB · Views: 3
  • IMG_1820.jpeg
    IMG_1820.jpeg
    287.6 KB · Views: 5
  • IMG_1819.jpeg
    IMG_1819.jpeg
    249.4 KB · Views: 5
  • IMG_1815.jpeg
    IMG_1815.jpeg
    311.8 KB · Views: 4
  • IMG_1818.jpeg
    IMG_1818.jpeg
    203.7 KB · Views: 4
  • IMG_1813.jpeg
    IMG_1813.jpeg
    319.1 KB · Views: 4
  • IMG_1812.jpeg
    IMG_1812.jpeg
    310.8 KB · Views: 4
  • IMG_1811.jpeg
    IMG_1811.jpeg
    309.9 KB · Views: 3
  • IMG_1810.jpeg
    IMG_1810.jpeg
    266.8 KB · Views: 4
I can say my preference and the way I set up AI is
Doing Some watering, topped up all 3 pots with about a gallon and a half of fresh peat moss worked it and the cover crop down a bit then re sowed more white clover, gunna cycle it again before fall when I wanna get something running in em

Frostette is a beast already, she’s upper clean and net is full, just lettin her tops beef up a tad then she’s flipping
Do you think a low dose across the board of Great white root boost will like, be a turn key on living soil as an engine? Should I wait for mid late flower? How about just cracking soil seedling?
HOW DO I STEAL LUMENS FROM GOD?
 
No idea on this one homie! Hopefully someone gets an answer to ya, building PC’s the past few days I found GROK very helpful with solving issues if your work with it and answer clearly
I have a week left on the last girl and then tent will be empty. If I have to restore / reset the damn thing I do not want to do it with a plant in the tent.
All the automation, all the traces. Gone.

It's 1998 again and I am restoring widows whatever for the 5th time... But ya know what Mike? Gotta admit I was a bit of a Sheldon back then and looked forward to system restores and tweaks.

My wife has a laptop with the latest and greatest from an employer and the screens look like a phone app. No more force feeding generic drivers to get a printer working. If it's not on the manufacturers list it does not work. All the good stuff from USB is screwed now due to exploits.

This is why I post my weekly numbers in my diaries and journals.
 
I have a...
Yeah there was a time when I thought custom booting for gaming was snappy and whacky builds were cool... now I like IBM level efficient.
My tent isn't automated the info processing is. I know things about lumens and it makes me smile. Esoteric graphs are now useful.
 
Literally same thing that happened to me the first time.

I think it’s too much plant material clogging up the bags. That paint mixer is way too violent lol

That’s just my input but I’ve only done it like five times now. Had much cleaner results last time mixing slowly and gently by hand with a plastic spoon honestly. Let the ice water do the trick not the whipping lol

Still smokable as fuck though I’d say haha spice up a bowl when you feel like getting a little extra Stoney. Haha
Agreed 101% COLD seems to me to be the mitigating factor and I mean -0 F COLD. Dry ice in the water is huge as is freezing the bud. Mix by hand and keep the power tools out of the bucket.

The more you agitate the bud the more smaller pieces are made and pretty soon the mesh is packed defeating the entire purpose.

Go slow and easy. As long as everything is ice cold it will work well with little effort.

Try and keep in mind you're trying to break off trichs, not make leaf parts.

Took me several tries stating with a wooden spoon to my ryobi drill with a paint mixing blade. Spoon produced way better hash😎

Now dry ice hash is really good but you can only slosh it around in the working bag for about 10 seconds. Dump out the whole thing and put fresh ice and bud and slosh it around 10 seconds. Repeat.

Dry ice makes quick work of flower/leaf. Remember, breaking off trichs is all you're doing😉
 
Well boys, it exists out there. @Captspaulding probably knows seed sources far and near or hell google?
This is why I waited and upgraded and watched the equipment differences. I'm still running 100w overhead, 100w side.
View attachment 2503957
BUT. AI on the pay level for a month, GPT Premium $20, this is logging and tracking like I want to but never quite do. It asks shit, extrapolates shit, provides a table of citations as to it's evidences, spits facts, stats and warnings. I still double check but it's not the details as much as the job; it's a damn good field dog and work partner.
So I am ready for a real seed. Not so much cherry autos (but I was gifted 5 more lmao call me Chairman Cherry Piss). I'll run one auto and 3 photos and just separate the auto early flower, then seed another cherry fucker.
*snif* I'm a real big boy again, really I am! You'll see! YOU'LL ALL SEE!!! Me and my might 4!
i still think you’re over complicating it.

Even more now actually lmao
 
Morning homies, rainy day, checkin out emails and smokin joints till the rain passes, lots of real estate on this desk wifes already usin it for stuff, but that’s fine lol wait till the big screens get here evenetually (if ever) theyll be the width of the desk (possibly hang over a few inches on each end)

hats a LG 34” ultrawide monitor, my plan would be 3 that width lol

Now to get the basement PC back up and running possibly as a home media server or something lol
RAIN!

it’s supposed to be here at noon lol I did a rain dance last night.
 
Status
Not open for further replies.
Page 3911 of 4778 · Replies 78,201–78,220 of 95,544
Back
Top Bottom