Cubing - A myth by Chimera

  • Thread starter Texas Kid
  • Start date
  • Tagged users None
Texas Kid

Texas Kid

Some guy with a light
4,159
263
Cubing.......a myth.

Here's breeder chimera's take on the subject:

"you’ve just discovered the biggest myth (IMNSHO) of marijuana breeding- it is a mistake that almost EVERYONE makes (including many of the most respected breeders!).

Backcrossing will not stabilize a strain at all- it is a technique that SHOULD be used to reinforce or stabilize a particular trait, but not all of them.

For e.g.- G13 is a clone, which I would bet my life on is not true breeding for every, or even most traits- this means that it is heterozygous for these traits- it has two alleles (different versions of a gene). No matter how many times you backcross to it, it will always donate either of the two alleles to the offspring. This problem can be compounded by the fact that the original male used in the cross (in this case hashplant) may have donated a third allele to the pool- kinda makes things even more difficult!

So what does backcrossing do?
It creates a population that has a great deal of the same genes as the mother clone. From this population, if enough plants are grown, individuals can be chosen that have all the same traits as the mother, for use in creating offspring that are similar (the same maybe) as the original clone.
Another problem that can arise is this- there are three possibilities for the expression of a monogenic (controlled by one gene pair) trait.

We have dominant, recessive, and co-dominant conditions.

In the dominant condition, genotypically AA or Aa, the plants of these genotypes will look the same (will have the same phenotype, for that trait).

Recessive- aa will have a phenotype

Co-dominant- Aa- these plants will look different from the AA and the aa.

A perfect example of this is the AB blood types in humans:

Type A blood is either AA or AO
Type B blood is either BB or BO
Type AB blood is ONLY AB
Type O blood is OO.

In this case there are three alleles (notated A, B, and O respectively).

If the clone has a trait controlled by a co-dominant relationship- i.e. the clone is Aa (AB in the blood example) we will never have ALL plants showing the trait- here is why:

Suppose the clone mother is Aa- the simplest possibility is that the dad used contributes one of his alleles,
let us say A. That mean the boy being use for the first backcross is either AA or Aa. We therefore have two possibilities:

1) If he is AA- we have AA X Aa- 50% of the offspring are AA, 50% are Aa. (you can do the punnett square to prove this to yourself).

In this case only 50% of the offspring show the desired phenotype (Aa genotype)!

2) If the boy being used is Aa- we have Aa X Aa (again do the punnett square) this gives a typical F2 type segregation- 25% AA, 50% Aa, and 25% aa.
This shows that a co-dominant trait can ONLY have 50% of the offspring showing the desired trait (Aa genotype) in a backcross.

If the phenotype is controlled by a dominant condition- see example #1- all 100% show the desired phenotype, but only 50% will breed true for it.

If the phenotype is controlled by a recessive condition- see example #2- only 25% will show the desired phenotype, however if used for breeding these will all breed true if mated to another aa individual.

Now- if the original dad (hashplant) donates an 'a' allele, we only have the possibilities that the offspring, from which the backcross boy will be chosen, will be either Aa or aa.
For the Aa boy, see #2.
For the aa boy (an example of a test cross, aa X Aa) we will have:
50% aa offspring (desired phenotype), and 50% Aa offspring.

Do you see what is happening here? Using this method of crossing to an Aa clone mother, we can NEVER have ALL the offspring showing the desired phenotype! Never! Never ever ever! Never!! LOL

The ONLY WAY to have all the offspring show a Aa phenotype is to cross an AA individual with an aa individual- all of the offspring from this union will be the desired phenotype, with an Aa genotype.

Now, all of that was for a Aa genotype for the desired phenotype. It isn't this complicated if the trait is AA or aa. I hope this causes every one to re-evaluate the importance of multiple backcrosses- it just doesn't work to stabilize the trait!

Also- that was all for a monogenic trait! What if the trait is controlled by a polygenic interaction or an epistatic interaction- it gets EVEN MORE complicated? AARRGH!!!!

Really, there is no need to do more than 1 backcross. From this one single backcross, as long as we know what we are doing, and grow out enough plants to find the right genotypes, we can succeed at the goal of eventually stabilizing most, if not all of the desired traits.

The confusion arises because we don't think about the underlying biological causes of these situations- to really understand this; we all need to understand meiosis.

We think of math-e.g. 50% G13, 50% hashplant

Next generation 50% G13 x 50% g13hp or (25% G13, 25%HP)

We interpret this as an additive property:
50% G13 + 25% G13 +25% HP = 75% G13 and 25% hashplant

This is unfortunately completely false- the same theory will apply for the so called 87.%% G13 12.5% HP next generation, and the following 93.25% G13, 6.25% HP generation; we'd like it to be true as it would make stabilizing traits fairly simple, but it JUST DOESN'T work that way. The above is based on a mathematical model, which seems to make sense- but it doesn't- we ignore the biological foundation that is really at play.

I hope this was clear, I know it can get confusing, and I may not have explained it well enough- sorry if that is the case, I'll try to clear up any questions or mistakes I may have made.

Have fun everyone while making your truebreeding varieties, but just remember that cubing (successive backcrosses) is not the way to do it!

-Chimera"
 
Kuntjoose

Kuntjoose

336
28
wow Kid where did u find that? i havent found any info like that from Chim. nice 1 man
 
Devilsharvest

Devilsharvest

354
18
nice one kid that was a nice way to explain it..I'm working on a lot of crosses now I'll be doing back crossing.. I cracked 100 cheesel 2 weeks ago see how she grows out
 
Texas Kid

Texas Kid

Some guy with a light
4,159
263
wow Kid where did u find that? i havent found any info like that from Chim. nice 1 man


He has some gems out there if ya look, one smart cat........I actually think he writes alot of stuff but I think it is on a super brianiac botany site that is all advanced degree folks and professors in botony and genetics and has nothing to do with cannabis.

I will have to find some of the others

Tex
 
thesoftdrugbaron

thesoftdrugbaron

467
18
still way above my ed atmo.. but practice makes perfect..... me and breeding has only just started...lol
 
C

Chimera

58
18
Wow that is painful for me to read.... I must have been pretty stoned when I wrote that, now years ago. I'm glad at least that it's info that has spread a little knowledge and perspective into the community over the years.. I do however need to re-write it...

Here's a snipet on backcrossing from the breeding chapter I wrote for Jorge's most recent version of the bible.

Backcross Breeding –
A type of breeding that involves repeated crossing of progeny with one of the original parental genotypes; cannabis breeders most often cross progeny to the mother plant. This parent is known as the recurrent parent. The non-recurrent parent is called the donor parent. More widely, any time a generation is crossed to a previous generation, it is a form of backcross breeding. Backcross breeding has become one of the staple methods clandestine cannabis breeders use, mainly because it is a simple, rapid method when using greenhouses or grow
rooms, and requires only small populations. The principle goal of backcross breeding is to create a population of individuals derived mainly from the genetics of one single parent (the recurrent parent).

The donor parent is chosen based on a trait of interest that the recurrent parent lacks; the idea is to introgress this trait into the backcross population, such that the new population is comprised mainly of genetics from the recurrent parent, but also contains the genes responsible for the trait of interest from the donor parent.

The backcross method is a suitable scheme for adding new desirable traits to a mostly ideal, relatively true-breeding genotype. When embarking on a backcross breeding plan, the recurrent parent should be a highly acceptable or nearly ideal genotype (for example, an existing commercial cultivar or inbred line). The ideal traits considered for introgression into the new seed line should be simply inherited and easily scored for phenotype. The best donor parent must possess the desired trait, but should not be seriously deficient in other traits. Backcross line production is repeatable, if the same parents are used.

Backcross breeding is best used when adding simply inherited dominant traits that can easily be identified in the progeny of each generation (example 1). Recessive traits are more difficult to select for in backcross breeding, since their expression is masked by dominance in each backcross to the recurrent parent. An additional round of open pollination or sib-mating is needed after each backcross generation, to expose homozygous-recessive plants. Individuals showing the recessive condition are selected from F2 segregating generations and backcrossed to the recurrent parent (see example 2).

Example 1– Backcrossing: Incorporating a dominant trait

Step1– Recurrent Parent × Donor Parent
|
V
F1 Hybrid generation

Step 2 – Select desirable plants showing dominant trait, and hybridize selected plants to recurrent parent. The generation produced is denoted BC1 (some cannabis breeders break from botanical convention and denote this generation Bx1. BC1= Bx1).

Step 3 – Select plants from BC1 and hybridize with the recurrent parent; the resulting generation is denoted BC2.

Step 4 – Select plants from BC2 and hybridize with the recurrent parent; the resulting generation is denoted BC3.
.

Example 2 Backcrossing: Incorporating a recessive trait

Step1– Recurrent Parent × Donor Parent
|
V
F1 Hybrid generation

Step 2 – Select desirable plants, and create an F2 population via full sib-mating.

Step 3 – Select plants showing the desired recessive trait in the F2 generation, then hybridize selected F2-recessive plants to the recurrent parent. The generation produced is denoted BC1.

Step 3 – Select plants from BC1, and create a generation of F2 plants via sib-mating; the resulting generation can be denoted BC1F2

Step 4 – Select desirable BC1F2 plants showing the recessive condition, and hybridize with the recurrent parent; the resulting generation is denoted BC2.

Step 5 – Select plants from BC2, and create an F2 population via sib-mating; denote the resulting generation BC2F2.

Step 6 – Select plants showing the recessive condition from the BC2F2 generation, and hybridize to the recurrent parent; the resulting generation is denoted BC3.

Step 7 – Grow out BC3, select and sib-mate the most ideal candidates to create an F2 population, where plants showing the recessive condition are then selected and used as a basis for a new inbred, or open-pollinated seed line.

This new generation created from the F2 is a population that consists of, on average, ~93.7% of genes from the recurrent parent, and only ~6.3% of genes leftover from the donor parent. Most importantly, one should note that since only homozygous-recessives were chosen for mating in the BC3F2 generation, the entire resulting BC3F3 generation is homozygous for the recessive trait, and breeds true for this recessive trait. Our new population meets our breeding objective. It is a population derived mainly from the genetics of the recurrent parent, yet breeds true for our introgressed recessive trait.


Backcross derived lines are expected to be well-adapted to the environment in which they will be grown, which is another reason backcrossing is often used by cannabis breeders who operate indoors. Indoor grow rooms are easily replicated all over the world, so the grower is able to grow the plants in a similar environment in which they were bred. Progeny therefore need less extensive field-testing by the breeder across a wide range of environments.

If two or more characters are to be introgressed into a new seed line, these would usually be tracked in separate backcross programs, and the individual products would be combined in a final set of crosses after the new populations have been created by backcrossing.

The backcross scheme has specific drawbacks, however. When the recurrent parent is not very true-breeding, the resulting backcross generations segregate, and many of the traits deemed desirable to the line fail to be reproduced reliably. Another limitation of the backcross is that the “improved” variety differs only slightly from the recurrent parent (e.g., one trait). If multiple traits are to be introgressed into the new population, other techniques such as inbreeding or recurrent selection may be more rewarding.

Hope that's a little more clear......
Respectfully,
-Chimera
 
O

OG bub

18
1
hate to sound repetative... but yeah, good work, great write chimera.

peace, bub.
 
G

grapepunched

Guest
Thanks for the info... if I cross an F1 to an F2, what is that considered?

-gp
 
C

Charles Xavier

50
0
Greetings grapepunched

...if I cross an F1 to an F2, what is that considered?....grapepunched

It is considered a Backcross.
Commonly notated: BX
Conventionally notated: BC

The exact notation is example specific with the assumption that the same genetic line is being referenced.

Sincerely,
Charles.
 
S

spinkus

320
16
Hard NOT to buy seeds from someone with that much knowledge of breeding. Never grown any Chimera strains, but that just might change.
 
Tobor the 8th Man

Tobor the 8th Man

Supporter
2,500
163
So backcrossing isn't as bad an idea as you first thought Chimera?

What OG cut do you have Chimera? Or is it Pure Kush?
 
C

Charles Xavier

50
0
Greetings Tobor

My intent is most certainly not to speak for Chimera, but I am applying my answer to the one of your questions that I can reasonably respond to. In terms of breeding techniques: the conclusion of 'good' or 'bad' is verifiably dependant on application and intent.

All that should be inferred is: Backcrossing is not the most reliable method of stabilizing traits that are expressed co-dominantly or ones which are polygenic.

Co-dominance relates to two alleles of a gene pair in a heterozygote that are both fully expressed. Simplistically, both the dominant and the recessive forms of a trait are expressed in what could be termed a 'mixed phenotype'.

Going back to Mendel: If dominant is red, and recessive is white, then co-dominant would be pink.

Polygenic refers to the combined action and expressed interaction of alleles of more than one gene resulting in a single trait.

This response is an analogy to the process of backcrossing: It throughly answered only one of your questions.

Sincerely,
Charles.
 
Tobor the 8th Man

Tobor the 8th Man

Supporter
2,500
163
Interesting CX. But it doesn't really answer my question unless Chimera had the knowledge you just expressed when he first wrote the article about cubing. His initial article was not imbracing cubing. His latest article was basically saying it had it's place and seemed like he was now using it.

My question of "So backcrossing isn't as bad an idea as you first thought Chimera?" still stands.

I wasn't saying one was bad or good because I already read Mendel and understood it all. I was aware of codominant traits. I think many people actually think codomination is going to happen everytime they make a cross. It's actually hard to find.

It reminds me of a story about Winston Churchill. He was at a dinner party with some beautiful, famous movie star or dancer (I forget) and she said to him that they should have a baby together and the child could be a beautiful as her and as smart as him. And he retorted "What if the child has my looks and your brains though?".
 
B

British_Hempire

Guest
I don't have the in depth understanding of genetics to debate this topic on the level of Chimera and Charles Xavier, but let me share with you my layman's take on the subject of cubing with the object of stabilisation of a phenotype:

If the female you are cubing is stable and truebreeding for the desirable traits you wish to stabilise then cubing is indeed a valid route to take.

However, if the female is not truebreeding for her desirable traits, cubing will not allow you to stabilise for these traits and a different breeding strategy should be applied.
 
C

Cusick

71
0
Awesome reading in this thread.

Hope there always remain those willing to undertake the efforts..
A clone-only world would get old.
 

Latest posts

Top Bottom