Council Of First Knowledge, Jedi Temple Training Facility

And btw... does this look to be powdery mildew? Or something else? Been keeping wind on, temp 69 to 79 and RH at 38% very consistently... it seems to be mostly on this one plant in the corner now that things were moved around several days ago when I added the 2nd HPS...only on the interior or lower leaves and not newer growth...

Wisher619 said:

the reason why it isnt soaking is because he watered completely yesterday

Click to expand...

Spot on brother!!! I actually put 1 cup in each bucket last night and only pulled 1 cup back put soo they took a half a solo cup a piece. Which reqlly aint bad xonsidering i gave full feeding yesterday morning like u said.

EventHorizan said:

So wisher, do you think this 1 gal is gonna wick up right?
Wood it wont need much water right at first..
Them roots got a lot of new real estate to roam around in and it will hold moisture a lot longer than that solo cup.. Tomm give it about what you thought it drank today..
Dont worry, in a couple weeks you will be pouring a lot more in there and it will soak it up like a sponge..
U prob never get over 10 gals a week tho.. with just them 2 plants...

Click to expand...

Yeah i honestly figured it wouldnt soak up much last night w the full feeding yesterday and all. Soo this morning ima try to give them a cup a piece again n see what happens

Itzdwoodduhh said:

Yeah i honestly figured it wouldnt soak up much last night w the full feeding yesterday and all. Soo this morning ima try to give them a cup a piece again n see what happens

Click to expand...

Turns out they didnt soak up even half as much as they did last night. I would say they soaked up a quarter of a cup a piece this morning. Had to dump the buckets again soo i didnt leave them sitting in water all day. Anyways i guess when i get home i should try and feed again and see if they will soak anything else up. I snapped this pic this morning

Pain Releaf said:

And btw... does this look to be powdery mildew? Or something else? Been keeping wind on, temp 69 to 79 and RH at 38% very consistently... it seems to be mostly on this one plant in the corner now that things were moved around several days ago when I added the 2nd HPS...only on the interior or lower leaves and not newer growth...

Click to expand...

Scratch it being only on 1. It was on 5 of 6.

Pain Releaf said:

Scratch it being only on 1. It was on 5 of 6.

Click to expand...

Not that i would b any real help here but its kinda hars to see with your lights on. Maby try taking a pic w the lights off so we can see colors a little better?
Everything just looks really gold to me. Lol

Itzdwoodduhh said:

Turns out they didnt soak up even half as much as they did last night. I would say they soaked up a quarter of a cup a piece this morning. Had to dump the buckets again soo i didnt leave them sitting in water all day. Anyways i guess when i get home i should try and feed again and see if they will soak anything else up. I snapped this pic this morning

Click to expand...

Just 1 time a day at lights on.. Till the roots fill out the new 1 gal

EventHorizan said:

Just 1 time a day at lights on.. Till the roots fill out the new 1 gal

Click to expand...

Even if they dont soak hardly anything up that morning?

Itzdwoodduhh said:

Not that i would b any real help here but its kinda hars to see with your lights on. Maby try taking a pic w the lights off so we can see colors a little better?

Click to expand...

Thanks, good call, Wood! Still in the shop (all night) so I hasn't seen them yet on a full sized screen.

Here we go... 1 of whatever on the leaf.

Thoughts anyone?[/QUOTE]

Pain Releaf said:

View attachment 762778


Thanks, good call, Wood! Still in the shop (all night) so I hasn't seen them yet on a full sized screen.

Here we go... 1 of whatever on the leaf.

Thoughts anyone?

Click to expand...

[/QUOTE]
Google powdery mildew and click images. When I got it from a dispensary clone mine would mostly start out with round spots. If you look at those images you'll see a lot of the spots I'm talking about. It still may be what you got I'm not sure. Is it on the whole plant or just a couple leaves? If it is don't just brush that stuff off it will spread everywhere. Handle it carefully. Maybe put a baggie over the leaves then pull them off or wipe them with a sponge wet with milk and throw away the sponge. Get one of them leaves carefully and inspect it for bugs too somewhere outside the grow room. I tried to cure it and couldn't but that was before the internet. Someone here probably has good advice on how to handle it.

Pain Releaf said:

And btw... does this look to be powdery mildew? Or something else? Been keeping wind on, temp 69 to 79 and RH at 38% very consistently... it seems to be mostly on this one plant in the corner now that things were moved around several days ago when I added the 2nd HPS...only on the interior or lower leaves and not newer growth...

Click to expand...

looks like residue from when you were constantly "misting" your plants
but if you really want to know

spray those specific leaves with water just reg water
and pull them off
spray and pull all leaves that look like that
then monitor that plant
if it is PM....in about 5-7 days it will show up again on more leaves
then you can pull the entire plant and throw it on the fire

Itzdwoodduhh said:

Turns out they didnt soak up even half as much as they did last night. I would say they soaked up a quarter of a cup a piece this morning. Had to dump the buckets again soo i didnt leave them sitting in water all day. Anyways i guess when i get home i should try and feed again and see if they will soak anything else up. I snapped this pic this morning

Click to expand...

no just leave them for now
let them be until the coco starts to dry a little
allow them to dry down and the roots to establish a little
normally I dont tell people this
but because you jumped to such a big pot
I want those roots to stretch a little

Itzdwoodduhh said:

Even if they dont soak hardly anything up that morning?

Click to expand...

Like wish said, if the sponge dont suck it up thats because it's still almost 100% fully wet.. As the roots take ovrr that 1 gal it will take more and more...
In 17 days we see how well she wicks...
Promise it will be a lot better..
You could bump the light up to 400 if you can keep temps under 82..
See u after work..

EventHorizan said:

Like wish said, if the sponge dont suck it up thats because it's still almost 100% fully wet.. As the roots take ovrr that 1 gal it will take more and more...
In 17 days we see how well she wicks...
Promise it will be a lot better..
You could bump the light up to 400 if you can keep temps under 82..
See u after work..

Click to expand...

10/3)4 sounds like a plan. I will kick the lights up when i get home n see how the temp holds. Soo for just feed once when lights on like usual no matter how much she soaks up correct? Obviously im not gonna leave any watwr sitting in the bucket for now

Itzdwoodduhh said:

10/3)4 sounds like a plan. I will kick the lights up when i get home n see how the temp holds. Soo for just feed once when lights on like usual no matter how much she soaks up correct? Obviously im not gonna leave any watwr sitting in the bucket for now

Click to expand...

yeah thats fine

Wisher619 said:

looks like residue from when you were constantly "misting" your plants
but if you really want to know

spray those specific leaves with water just reg water
and pull them off
spray and pull all leaves that look like that
then monitor that plant
if it is PM....in about 5-7 days it will show up again on more leaves
then you can pull the entire plant and throw it on the fire

Click to expand...

No treatment options?

Would it help at all to drop the humidity forther...30%...25%...?

Any chance adding IBN to the room might reduce to likelihood of it recurring if that's what it is...or help somewhat to prevent it if not it now?

What about that sulphur pot I Have? Isn't PM what it's for?

Woah! That's the most simple method for diy sips ever! Would be a great environment to try out em1 as well, good looks event!

Pain Releaf said:

No treatment options?

Would it help at all to drop the humidity forther...30%...25%...?

Any chance adding IBN to the room might reduce to likelihood of it recurring if that's what it is...or help somewhat to prevent it if not it now?

What about that sulphur pot I Have? Isn't PM what it's for?

Click to expand...

I addressed this in a pm

lemons said:

Woah! That's the most simple method for diy sips ever! Would be a great environment to try out em1 as well, good looks event!

Click to expand...

there is an even easier method
it is called static hydroponics

basically
build (wooden box lined with 6mil plastic)or get a reservoir.....above make a stand or tray for your plants
insert a nylon "wick" into the bottom of the pot and sit the other end of the wick in the reservoir
done deal
through the wick the plants will uptake what it needs

I'm hoping/thinking I fixed my issue with it getting so cold in my tent. It's in front of a window (with a blanket over it) and I looked at the window frame.. was some gaps inbetween the window and frame. Could literally feel the cold air coming in. So, I caulked the shit out of it. Seems to be doing the job. Guess time will tell