All new strains to me

  • Thread starter DreamsOfDiesel
  • Start date
  • Tagged users None
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Hoping defoliation & clip fans help, if not then I'll have to get bigger inline fan. Unless anyone has any tricks to dehumidify tent without dehumidifier??
 
Jamie73

Jamie73

286
93
Hoping defoliation & clip fans help, if not then I'll have to get bigger inline fan. Unless anyone has any tricks to dehumidify tent without dehumidifier??
I put a computer fan in. It’s a 4” Amazon 9$ I have it in a vent hole I wasn’t using. It’s on 24/7 so when lights go out it’s still drawing in room air. Brought my Humidity down to 40% and temps around 68-73 overnight. How ever my set up is in the basement. Not heated. But 10 feet from furnace and hot water heater. I started draining my over flow catches and setup a double window fan just blowing on the pots. Keeps them less wet. I had all the same issues 3 weeks ago. Yesterday light time temp was 78 dropped to 67 overs. It was also 28 outside over night. I lifted all pots up 4 inches to for more air circulation. Put a damp rid bag in there at night. Or the nice set of big set up of damp rid.
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
I put a computer fan in. It’s a 4” Amazon 9$ I have it in a vent hole I wasn’t using. It’s on 24/7 so when lights go out it’s still drawing in room air. Brought my Humidity down to 40% and temps around 68-73 overnight. How ever my set up is in the basement. Not heated. But 10 feet from furnace and hot water heater. I started draining my over flow catches and setup a double window fan just blowing on the pots. Keeps them less wet. I had all the same issues 3 weeks ago. Yesterday light time temp was 78 dropped to 67 overs. It was also 28 outside over night. I lifted all pots up 4 inches to for more air circulation. Put a damp rid bag in there at night. Or the nice set of big set up of damp rid.
I wouldn't be able to leave vent open while lights off for computer fan (mines in main area) so I'll look into damp rid bag (never heard of them, need to get out more lol). My temps are little cool right now (65-75) but not too bad. Thanks
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
I put a computer fan in. It’s a 4” Amazon 9$ I have it in a vent hole I wasn’t using. It’s on 24/7 so when lights go out it’s still drawing in room air. Brought my Humidity down to 40% and temps around 68-73 overnight. How ever my set up is in the basement. Not heated. But 10 feet from furnace and hot water heater. I started draining my over flow catches and setup a double window fan just blowing on the pots. Keeps them less wet. I had all the same issues 3 weeks ago. Yesterday light time temp was 78 dropped to 67 overs. It was also 28 outside over night. I lifted all pots up 4 inches to for more air circulation. Put a damp rid bag in there at night. Or the nice set of big set up of damp rid.
I just looked up damprid, I've walked by that stuff thousands of times & have not once paid attention to it. Lol I'll add it to my list if clip fans & defoliation dont help enough. Probably just get some anyway
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Hate being at standstill. Waiting another day or 2 for clones to root so I have room to repot my stuff in solo cups. Flowering tent way overcrowded, 16 in 4x4 & have to add 2 more in few days, veg will be overcrowded in couple days, I need more room. Hopefully I can pull 2 or 3 in next week or so (have 6 in there that are regs so will pull males & finish females). Earliest harvest time is 4/18 but then will be pretty much weekly harvesting after that.
They are actually doing good with my cheap Chinese blurple. Only been in since 3/7 & they are growing on schedule or maybe little ahead. Not bothering to post this stuff anywhere but this thread mostly. Too much bs about it all. I'll just figure it out myself. I still think I have a good chance of success with these. I figure my 2000w is about same as 600w hps which is not as good as what I had before but better than nothing.
I run cheap chinese lights & havent shown any proof of ability here, I understand why I'm a joke to some here, but to the doubters...just wait & see what I can do 😄
 
Jamie73

Jamie73

286
93
Hate being at standstill. Waiting another day or 2 for clones to root so I have room to repot my stuff in solo cups. Flowering tent way overcrowded, 16 in 4x4 & have to add 2 more in few days, veg will be overcrowded in couple days, I need more room. Hopefully I can pull 2 or 3 in next week or so (have 6 in there that are regs so will pull males & finish females). Earliest harvest time is 4/18 but then will be pretty much weekly harvesting after that.
They are actually doing good with my cheap Chinese blurple. Only been in since 3/7 & they are growing on schedule or maybe little ahead. Not bothering to post this stuff anywhere but this thread mostly. Too much bs about it all. I'll just figure it out myself. I still think I have a good chance of success with these. I figure my 2000w is about same as 600w hps which is not as good as what I had before but better than nothing.
I run cheap chinese lights & havent shown any proof of ability here, I understand why I'm a joke to some here, but to the doubters...just wait & see what I can do 😄
I do 2. 3 viperspectra lights. 2 450,s 1 1200. They work. Buds Might not be as dence. But are still high quality. Total cost of lights 329$
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Thanks guys, even an eternal optimist like me will occasionally have a bad day. I usually could care less about naysayers but gets to me sometimes.

Here's the newest split clones
Critical kush, both halves of the top, see roots on 1 thru cup but others roots too small but I promise they are there
15852591476518515922219087501146
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
If your stuck in side. I highly suggest watching disjointed on Netflix. It’s a riot. Living the cannabis dream.
Kathy Bates is the lead.
No Netflix right now, I switch around a lot, have sling & prime for few months then maybe back to hulu & netflix. I need to try to go to sleep before I go to work tonight, been up since yesterday except for few hours. & ow I just burned my nose relighting a joint
 
MIMedGrower

MIMedGrower

17,190
438
Hoping defoliation & clip fans help, if not then I'll have to get bigger inline fan. Unless anyone has any tricks to dehumidify tent without dehumidifier??


Higher temps will lower relative humidity.


Hate being at standstill. Waiting another day or 2 for clones to root so I have room to repot my stuff in solo cups. Flowering tent way overcrowded, 16 in 4x4 & have to add 2 more in few days, veg will be overcrowded in couple days, I need more room. Hopefully I can pull 2 or 3 in next week or so (have 6 in there that are regs so will pull males & finish females). Earliest harvest time is 4/18 but then will be pretty much weekly harvesting after that.
They are actually doing good with my cheap Chinese blurple. Only been in since 3/7 & they are growing on schedule or maybe little ahead. Not bothering to post this stuff anywhere but this thread mostly. Too much bs about it all. I'll just figure it out myself. I still think I have a good chance of success with these. I figure my 2000w is about same as 600w hps which is not as good as what I had before but better than nothing.
I run cheap chinese lights & havent shown any proof of ability here, I understand why I'm a joke to some here, but to the doubters...just wait & see what I can do 😄


Who says that?
 
Last edited:
Jamie73

Jamie73

286
93
Thanks guys, even an eternal optimist like me will occasionally have a bad day. I usually could care less about naysayers but gets to me sometimes.

Here's the newest split clones
Critical kush, both halves of the top, see roots on 1 thru cup but others roots too small but I promise they are thereView attachment 954361
Gonna have to give a tutorial on how you did it. I think of only 2 ways.
 
dire wolf

dire wolf

4,921
263
Hate being at standstill. Waiting another day or 2 for clones to root so I have room to repot my stuff in solo cups. Flowering tent way overcrowded, 16 in 4x4 & have to add 2 more in few days, veg will be overcrowded in couple days, I need more room. Hopefully I can pull 2 or 3 in next week or so (have 6 in there that are regs so will pull males & finish females). Earliest harvest time is 4/18 but then will be pretty much weekly harvesting after that.
They are actually doing good with my cheap Chinese blurple. Only been in since 3/7 & they are growing on schedule or maybe little ahead. Not bothering to post this stuff anywhere but this thread mostly. Too much bs about it all. I'll just figure it out myself. I still think I have a good chance of success with these. I figure my 2000w is about same as 600w hps which is not as good as what I had before but better than nothing.
I run cheap chinese lights & havent shown any proof of ability here, I understand why I'm a joke to some here, but to the doubters...just wait & see what I can do 😄
Joke ? Dont say that , anyone who cant appreciate your skill and enthusiasm , is a dummy ......
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Higher temps will lower relative humidity.



Who says that?
Higher temps coming in next couple months (exterior room, warm in summer, cool in winter). Humidity is always bad in stl during summer & will permeate this room, ugh

As for the other...who knows, maybe I'm just being extra & taking things wrong, easy to do online, I'm already mostly over my snit, I recover quick 😋
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Gonna have to give a tutorial on how you did it. I think of only 2 ways.
Easy, just like normal clones, I let my seedling stretch a little & when it gets to 3-5 nodes for top then I just take large top & cut it up middle of stem to point where it has 2 grow tips, dip in clonex & pop in jiffy pellet. Cut in center tho, had 1 die when I didnt give it enough stem. They are delicate but seem to root faster than others, weird, experimenting more in near future with it, I'll try to take better pics of cut
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
I do 2. 3 viperspectra lights. 2 450,s 1 1200. They work. Buds Might not be as dence. But are still high quality. Total cost of lights 329$
Lol, mine are worse, got king plus 2000w in 4x4 & 1000w in 2x2, cost $275. I know I can do quality under anything if I can get quality outta $5 grow bulb 20 years ago lol. I'm am concerned about density, doesnt seem like itll be popcorn so far so I'm starting to think I may be able to do good enough for personal use until I move somewhere that I can add breakers as needed because im screwed here
 
Jamie73

Jamie73

286
93
Lol, mine are worse, got king plus 2000w in 4x4 & 1000w in 2x2, cost $275. I know I can do quality under anything if I can get quality outta $5 grow bulb 20 years ago lol. I'm am concerned about density, doesnt seem like itll be popcorn so far so I'm starting to think I may be able to do good enough for personal use until I move somewhere that I can add breakers as needed because im screwed here
Move the light a little closer to the canopy. It will get lore light in and trimm the leaves. Leave a few big on. they catch the light. You will get fat buds with that set up. Took me a few grows to figure out the light out. In the end it what I was putting into the plant. Nutrients and ph. Ph runoff I would get the lights closer maybe 15 inches to 18. Remember the numbers they say on the box or instructions are a bit off.
 
DreamsOfDiesel

DreamsOfDiesel

1,593
263
Move the light a little closer to the canopy. It will get lore light in and trimm the leaves. Leave a few big on. they catch the light. You will get fat buds with that set up. Took me a few grows to figure out the light out. In the end it what I was putting into the plant. Nutrients and ph. Ph runoff I would get the lights closer maybe 15 inches to 18. Remember the numbers they say on the box or instructions are a bit off.
I lower lights little every few days but now they are shooting up, gotta pull them all to defoliate & restake (gonna start using holes in pot rims instead of stakes more), just got clip fans today finally. Lots to do tomorrow night
 
Top Bottom