Custom X
- 17
- 3
All Right guys I am a new user but by no means a new grower, I am utilizing this setup to provide medication for my aliments.
So here is what I have so far I am open to ideas as I have never set up a room of this size. This is what it has going on, two flower rooms, a veg room, and a tent for my clones and moms.
Custom
So here is what I have so far I am open to ideas as I have never set up a room of this size. This is what it has going on, two flower rooms, a veg room, and a tent for my clones and moms.
- We will assume all outlets that need to be setup will run on a 110 circuit.
- I am considering moving the 200 Amp Panel into the electrical room.
- I am considering creating an Airlock / clean room via the electrical room.
- I want to seal off room 2 so that the only access is via the airlock clean room and room1
- Both room 1 and room 2 will be fully sealed and climate controlled utilizing a closed loop intake and exhaust to vent the heat from the lights. They will be equipped with cool tubes and run off a titan 16 lighting 240 V timing controller.
- The cool tubes will be cooled utilizing 4 (12) in inline fans.
And 4 (8) in booster fans.
- We will utilize insulated ducting throughout.
- Room 1 and 2 will be controlled utilizing a Saturn 5 Environment controller
- room 1 and 2 will be equipped with a100 L dehumidifier
- Both rooms will be equipped with a 50 LB Co2 tank and regulator
- I will have 6 16in wall mounted fans in room 1 and 2
- I have a phresh carbon filter and 10in inline fan equipped in each room for scrubbing
- In the case of excess heat I will equip a positive pressure intake with a high CFM phresh Filter
- There will be an exhaust system as well. Both intake and exhaust will be sealed off unless the Temps reach 82 degrees in which case a controller will kick on the venting and shut off the Co2 system.
- In addition to the various air cooling methods utilized in this setup we will be utilizing either two 12,000 BTU Mini Split AC's or two 24,BTU units??
- Both rooms will have two 55 Gallon Reservoirs Utilizing high flow pumps to irrigate the system. Both 55 g drums will be linked to a 200 gallon master reservoir. Outside of the rooms. Both rooms will be equipped with a sulphide Burner as a preventive measures to control bugs and PM.
- Both rooms will be lined with Panda Polly.
- Both floors in the rooms will be lined with heavy duty pond liner extending 5 inches up the walls.
- Both floors in the rooms will be painted with an white reflective epoxy paint.
- Room one and Two will be powered utilizing 240 V Xtrasun Digital 1000W Ballasts. All the ballasts will be mounted in the electrical/Clean room
- Room three or the VEG Room will be equiped with 6 12 in wall mounted fans.
- Each room will be setup for exhaust and intake utilizing a 10 in inline intake hooked up with a phresh filter. And exhausted utilizing a phresh exhaust filter.
- Room three will be run on 3 2x4 T5 light setups.
- The mother room will be equiped with a 1000 W Metal Halide housing three Mothers.
- On the far end will be our cloning area. Set on a 3 shelf metal rack utilizing 3 cloning chambers.
- The Mother and Veg room wil be cooled with a portable 10,000 BTU AC
- The warehouse will utilize 2 12 in high CFM exhaust blowers to vent any hot air from the top of the warehouse, which will be hooked up to a switch.
So this is it, it's an awesome space I am trying to make this as legit as possible so if you have equipment ads or suggestions. Or anything else let me know I do plan on documenting the build as well as any future grows. So looking forward to hearing from you guys. The Black boxes are outlet locations and inside the electrical room is a shop light. The Cooltubes are "Y"ed off at the junction points I just had trouble making a "Y". Rooms are also going to be equipped with green lights.
Custom